Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH 485 tractor parts & technical data

The Case IH 485, also known as IHC 485, is covered here with more than 200 items, from steering and front axle parts to vintage parts, brakes and transmission.

221 parts found for Case IH 485
Show:
ZF Pivot pin Ø 88 mm, thickness 50,5 mm ZF front axle 4472059051
8%
ZF
Pivot pin Ø 88 mm, thickness 50,5 mm ZF front axle 4472059051
€257,27 €212,62 €236,69 €195,61
 
Seal kit steering cylinder Case IH 464-884, Series 32-4240, Hydro 84
8%
Seal kit steering cylinder Case IH 464-884, Series 32-4240, Hydro 84
€37,49 €30,98 €34,49 €28,50
 
ZF Copper ring Ø 24 x 29 mm ZF Case IH
ZF
Copper ring Ø 24 x 29 mm ZF Case IH
€10,21 €8,44
 
Universal joint 26,97 x 81,7 mm, maintenance-free
8%
Universal joint 26,97 x 81,7 mm, maintenance-free
A: 26,97 mm. B: 81,7 mm. Universal joint size: . Lubrication system: Maintenance...
€37,44 €30,94 €34,44 €28,47
 
Universal joint 27 x 71 mm, maintenance-free
8%
Universal joint 27 x 71 mm, maintenance-free
A: 27 mm. B: 71 mm. Universal joint size: . Lubrication system: Maintenance-free...
€96,64 €79,87 €88,91 €73,48
 
Brake disc Ø 258 mm, 15 teeth, thickness 7,8 mm Case IH
8%
Brake disc Ø 258 mm, 15 teeth, thickness 7,8 mm Case IH
€123,61 €102,16 €113,72 €93,98
 
VICTOR REINZ Gasket set complete top and bottom engine D-155, D-179 Case IH
8%
VICTOR REINZ
Gasket set complete top and bottom engine D-155, D-179 Case IH
€531,86 €439,55 €489,31 €404,39
 
Gasket engine breather Case IH
Gasket engine breather Case IH
€7,78 €6,43
 
Gasket front cover engine D-155 - D-358, DT-358, DT-402 Case IH
8%
Gasket front cover engine D-155 - D-358, DT-358, DT-402 Case IH
€37,44 €30,94 €34,44 €28,47
 
Seal oliefiltersokkel Case IH
Seal oliefiltersokkel Case IH
€5,09 €4,20
 
Repair set water pump Case IH
8%
Repair set water pump Case IH
€61,36 €50,71 €56,45 €46,65
 
Thermostat Ø 54 mm, 82 °C Case IH 3210-4240
Thermostat Ø 54 mm, 82 °C Case IH 3210-4240
Ø: 54 mm. Temperature: 82 °C.
€36,11 €29,85
 
Crankshaft 4-cylinder standard, gear wheel, tooth flank height 10 mm Case IH
4%
Crankshaft 4-cylinder standard, gear wheel, tooth flank height 10 mm Case IH
Notes: Please follow the installation instructions. Then fill in the test report...
€1.148,19 €948,92 €1.106,33 €914,32
 
Cylinder head bolt 9/16" x 123 mm Case IH
Cylinder head bolt 9/16" x 123 mm Case IH
Dimensions: 9/16" x 123 mm. Menke no.: 117911.
€38,65 €31,94
 
Connecting rod bolt Case IH
8%
Connecting rod bolt Case IH
€44,98 €37,17 €41,38 €34,20
 
Connecting rod bush Case IH
Connecting rod bush Case IH
€13,05 €10,79
 
Cylinder head gasket set upper with valve stem seal Case IH
8%
Cylinder head gasket set upper with valve stem seal Case IH
Additional information: With valve stem seal.
€190,63 €157,55 €175,38 €144,94
 
Oil pump engine D155, D179 Case IH
8%
Oil pump engine D155, D179 Case IH
€505,38 €417,67 €464,95 €384,26
 
Injection nozzle Case IH 385-595, 433-733, 440-740, 3210-3230
Injection nozzle Case IH 385-595, 433-733, 440-740, 3210-3230
Type formula: DLLA150S836, 0433271838. Bosch no.: 2580433271838. Menke no.: 5411...
€34,88 €28,82
 
Silencer Case IH 484-884, Series 85-885 XL, Hydro 84
8%
Silencer Case IH 484-884, Series 85-885 XL, Hydro 84
€135,06 €111,62 €124,26 €102,69
 
Tank cap
Tank cap
€19,15 €15,83
 
Filter glass Ø 92,5 x 38 mm, hole Ø 9 mm
Filter glass Ø 92,5 x 38 mm, hole Ø 9 mm
Dimensions: Outer Ø 92.5, Hole Ø 9, Height: 38 mm.
€8,34 €6,89
 
Sealing ring between fuel filter
Sealing ring between fuel filter
€7,81 €6,46
 
Threaded spindle 7/8 UNC thread, length 368 mm Case IH
8%
Threaded spindle 7/8 UNC thread, length 368 mm Case IH
Dimensions: Length = 368, Thread = 7/8" UNC mm.
€85,42 €70,60 €78,59 €64,95
 
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 27 mm Case IH
8%
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 27 mm Case IH
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø top = 16, Ø b...
€189,52 €156,63 €174,36 €144,10
 
Threaded spindle 7/8 UNC thread, length 462 mm Case IH
8%
Threaded spindle 7/8 UNC thread, length 462 mm Case IH
Dimensions: Length = 462, Thread = 7/8" UNC mm.
€114,50 €94,63 €105,34 €87,06
 
Adjuster right 565 - 700 mm, Ø 16/19,5 mm Case IH
8%
Adjuster right 565 - 700 mm, Ø 16/19,5 mm Case IH
Dimensions: Length = 565 - 700, Ø top = 16, Ø bottom = 19.5, Clevis inside = 19 ...
€368,94 €304,91 €339,42 €280,52
 
Thermostat gasket 74702038 Case IH 248-4240
Thermostat gasket 74702038 Case IH 248-4240
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 533, 553, 6...
€3,95 €3,26
 
Filter glass Ø 92,5 x 38 mm, hole Ø 9 mm
Filter glass Ø 92,5 x 38 mm, hole Ø 9 mm
Outer Ø: 92.5 mm
Hole Ø: 9 mm
Height: 38 mm
€8,34 €6,89
 
ZF Oil seal 75 x 95 x 10 mm ZF front axle 4468056008
8%
ZF
Oil seal 75 x 95 x 10 mm ZF front axle 4468056008
€76,52 €63,24 €70,40 €58,18
 
ZF Oil seal front axle 28 x 45 x 10 mm Case IH
8%
ZF
Oil seal front axle 28 x 45 x 10 mm Case IH
€33,52 €27,70 €30,84 €25,49
 
ZF Pivot pin Ø 50 mm, thickness 51 mm ZF front axle 4468056021
8%
ZF
Pivot pin Ø 50 mm, thickness 51 mm ZF front axle 4468056021
€305,49 €252,47 €281,05 €232,27
 
Hand brake cable 415 mm, M8 x 1 Case IH
Hand brake cable 415 mm, M8 x 1 Case IH
Length: 415 mm. Thread: M8 x 1. Dimensions: Length = 415 mm, Thread M8 x 1.
€37,44 €30,94
 
Sealing ring Case IH
Sealing ring Case IH
€24,40 €20,17
 
Brake plate outer Ø 259,1 mm, inner Ø 206,2 mm, 7 mm thick, 3 teeth
8%
Brake plate outer Ø 259,1 mm, inner Ø 206,2 mm, 7 mm thick, 3 teeth
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206,2 mm.
€89,77 €74,19 €82,59 €68,25
 
Push rod 182 mm Case IH
Push rod 182 mm Case IH
Length: 182 mm.
€52,71 €43,56
 
Showing 145 - 192 of 221

Case IH 485 parts

The Case IH 485, still known to many as the IHC 485, is a tractor that tends to be repaired rather than replaced. It belongs to the 85 series, and this page has more than 200 parts for it from GRANIT, ZF, HELLA, LUK and VICTOR REINZ. A good number are gaskets and seals, which is what you need once the engine or hydraulics come apart.

Engine overhaul

  • Upper cylinder head gasket sets with valve stem seals, and full gasket sets
  • Thermostat gaskets and crankshaft seal sets
  • Feed pump O-rings and sealing rings for the fuel filter
  • Radiator hoses, including the bypass hose
  • Filter glass

The glass bowl on the fuel pre-filter is worth a look at every service. If water or dirt has settled at the bottom, drain it before it reaches the pump. Refit the bowl with a new seal and bleed the line. When you replace a radiator hose, renew rusty clamps too, because a new hose under an old clamp will still weep.

Clutch, steering and linkage

For the clutch there are clutch plates from LUK. Steering is covered by ball joints, the three point linkage by complete lifting spindles and pivot pins. You will also find bushes, hydraulic pump seals and HELLA flasher units.

Play in a ball joint shows up as vague steering. Have someone rock the steering wheel back and forth while you watch the joints, and the worn one will give itself away.

Set a new lifting spindle to length once it is fitted. Turn both spindles until the lower links sit at the same height, or the implement will hang crooked. Grease the thread, because a seized spindle is very hard to adjust later. Pivot pins and bushes in the linkage are best renewed together, as a new pin in a worn bush soon has play again.

An upper head gasket set with valve stem seals is meant for anyone taking the head off. Have the head checked for flatness while it is off and always fit the new stem seals. Worn seals let oil run down the valve stems, which shows as blue smoke on a cold start.

Identifying the right part

On a tractor of this age the type plate is sometimes hard to read. The reference number on the old part then helps, stamped into a casting or printed on a gasket. For lifting spindles and ball joints, measure the length and thread of the old one.

These tractors from the same series have their own pages:

For any other model from the brand, start from Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart