Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH 485 tractor parts & technical data

The Case IH 485, also known as IHC 485, is covered here with more than 200 items, from steering and front axle parts to vintage parts, brakes and transmission.

221 parts found for Case IH 485
Show:
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
€83,84 €69,29 €77,13 €63,75
You save 8%
Brake band for hand brake Ø 168 mm Case IH
€175,11 €144,72 €161,10 €133,14
You save 8%
Flywheel 126 teeth Case IH 474-784, Series 32-3230, Hydro 84
€720,32 €595,31 €712,69 €589,00
You save 1%
KS Piston ring set 3 rings Ø 98,43 mm, 3,16 mm / 2,39 mm / 4,75 mm Case IH
KS
Dimensions: 3 rings, Ø 98.43 mm, 3.16 mm (trapezoidal ring) / 2.39 mm / 4.75 mm. More
Dimensions: 3 rings, Ø 98.43 mm, 3.16 mm (trapezoidal ring) / 2.39 mm...
€61,30 €50,66 €56,40 €46,61
You save 8%
VICTOR REINZ Gasket set lower engine D-155, D-179 Case IH
€255,62 €211,26 €235,17 €194,36
You save 8%
VICTOR REINZ Cylinder head gasket Case IH 474-884, Series 32-4240, Hydro 84
€132,60 €109,59 €121,99 €100,82
You save 8%
Crankshaft, 4-cylinder gear wheel, tooth flank height 15 mm Case IH
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€1.131,64 €935,24 €1.091,11 €901,74
You save 4%
Main bearing undersize 0,25 mm Case IH
Dimensions: Undersize 0.25 mm. More
Dimensions: Undersize 0.25 mm.
€38,89 €32,14
Radiator hose, top Ø 38 / 50 mm Case IH
Inner Ø: 38 / 50 mm. More
Inner Ø: 38 / 50 mm.
€9,71 €8,03
Radiator Case IH 484, 684, 385-885 XL, 248-268, Hydro 84
€522,93 €432,17 €481,10 €397,60
You save 8%
Injection nozzle Case IH 238-258, 946-1056 XL, 3210-3230
Type formula: DLLA150S716, 0433271882. Bosch no.: 2580433271882. More
Type formula: DLLA150S716, 0433271882. Bosch no.: 2580433271882.
€39,63 €32,75
Stop cable for VE pump A 1340 mm, B 1190 mm Case IH 3210-4240
A: 1340 mm. B: 1190 mm. More
A: 1340 mm. B: 1190 mm.
€119,19 €98,50 €109,65 €90,62
You save 8%
Stop cable A 1290 mm, B 1060 mm Case IH 743 XL - 844 XL, 248-885 XL
€57,73 €47,71 €53,11 €43,89
You save 8%
Cylinder head gasket 1,59 mm Case IH 474-884, Series 32-4240, Hydro 84
€73,33 €60,60 €67,46 €55,76
You save 8%
Connecting rod bearing standard, width 32 mm Case IH
Dimensions: Width 32 mm. More
Dimensions: Width 32 mm.
€29,81 €24,64
Oil pump engine D206, D239, D246, D268 Case IH
€393,56 €325,26 €362,08 €299,24
You save 8%
Filter glass outer-Ø 93 mm, bore Ø 25 mm, height 52,5 mm
Dimensions: Outer Ø: 93, hole Ø: 25, height: 52.5 mm. More
Dimensions: Outer Ø: 93, hole Ø: 25, height: 52.5 mm.
€7,74 €6,39
Hydraulic pump Case IH
€730,16 €603,44 €671,75 €555,16
You save 8%
Lifting spindle complete 510 - 630 mm, thread 7/8", yoke 27 mm Case IH
Dimensions: Length min. = 510, Length max. = 630, Thread = 7/8", Ø top = 16, Ø bottom = 19, Clevis width = 27 mm. More
Dimensions: Length min. = 510, Length max. = 630, Thread = 7/8", Ø to...
€168,18 €138,99 €154,73 €127,87
You save 8%
Radiator grille upper plastic 560 x 220 mm
To fit as: McCORMICK / IHC / International / Case IH 238, 248, 268, 278, 384, 385, 484, 485, 485XL, 585, 585XL, 685, 685XL, 785, 785XL, 885, 885XL, 68... More
To fit as: McCORMICK / IHC / International / Case IH 238, 248, 268, 27...
€272,86 €225,50 €251,03 €207,46
You save 8%
Track rod 499 mm, 7/8" x 16, taper 16 - 18 mm, 7/8" x 16
A: 499 mm. B: 7/8" x 16 mm. C: 16 - 18 mm. G: . D: 7/8" x 16 mm. E: 28 mm. F: 20,75 mm. More
A: 499 mm. B: 7/8" x 16 mm. C: 16 - 18 mm. G: . D: 7/8" x 16 mm. E: 28...
€125,43 €103,66 €115,40 €95,37
You save 8%
Ball joint 80 mm, 1/2" x 20 mm, 11/16" x 18 mm
A: 80 mm. C: 1/2" x 20 mm. D: 11/16" x 18 mm. E: 15,5 mm. F: 18 mm. More
A: 80 mm. C: 1/2" x 20 mm. D: 11/16" x 18 mm. E: 15,5 mm. F: 18 mm.
€33,19 €27,43 €30,53 €25,24
You save 8%
Ball joint 95 mm, M14 x 1,5, 7/8" x 16, taper 15,6 - 18 mm
A: 95 mm. C: M14 x 1,5 mm. D: 7/8" x 16 mm. E: 15,6 mm. F: 18 mm. Taper: 15,6 - 18 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: 7/8" x 16 mm. E: 15,6 mm. F: 18 mm. Tape...
€36,57 €30,22 €33,64 €27,81
You save 8%
Exhaust manifold Case IH 474-884, Series 32-4230, Hydro 84
€201,31 €166,37 €185,21 €153,06
You save 8%
Counterweight Case IH 268-4220
€856,26 €707,65 €787,76 €651,04
You save 8%
O-ring feed pump Ø 32 x 2,5 mm Case IH
Version: Ø 32 x 2.5 mm. More
Version: Ø 32 x 2.5 mm.
€11,50 €9,50
Crankshaft seal rear Ø 110 x 130 x 13/14 mm Case IH
Outer Ø: 130 mm. Width: 13 / 14 mm. Inner Ø: 110 mm. Menke no.: 63683. More
Outer Ø: 130 mm. Width: 13 / 14 mm. Inner Ø: 110 mm. Menke no.: 6368
€31,38 €25,93
Gasket set lower Case IH Series 85-640, E 353-824, D 440
Additional information: Without cylinder liner gasket set. More
Additional information: Without cylinder liner gasket set.
€49,57 €40,97 €45,60 €37,69
You save 8%
Seal front cover Case IH 385-1455 XL
€49,12 €40,60 €45,19 €37,35
You save 8%
Lifting spindle complete 510 - 630 mm, thread 7/8" IHC 385-885 XL
Dimensions: Length min. = 510, Length max. = 630, Thread = 7/8", Ø top = 16, Ø bottom = 19, Clevis width = 45 mm. More
Dimensions: Length min. = 510, Length max. = 630, Thread = 7/8", Ø to...
€164,40 €135,87 €151,25 €125,00
You save 8%
HELLA Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
HELLA
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: black. Pressure range: 0,4 - 0,6 bar. Thread: ... More
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade te...
€11,24 €9,29
HELLA Glass rear light left with number plate light
HELLA
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 743, 744, 745 S, 785 XL, 844, 844 S, 845, 885 XL, 946, 955 XL, 1055 XL, 1046, 1246... More
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 74...
€28,73 €23,74
Exhaust manifold gasket IHC, Case IH 248-4230
To fit as: Case IH 743, 745S, 844S, 845, 743XL, 745XL, 844XL, 845XL More
To fit as: Case IH 743, 745S, 844S, 845, 743XL, 745XL, 844XL, 845XL
€8,64 €7,14
Showing 97 - 144 of 221

Case IH 485 parts

The Case IH 485, still known to many as the IHC 485, is a tractor that tends to be repaired rather than replaced. It belongs to the 85 series, and this page has more than 200 parts for it from GRANIT, ZF, HELLA, LUK and VICTOR REINZ. A good number are gaskets and seals, which is what you need once the engine or hydraulics come apart.

Engine overhaul

  • Upper cylinder head gasket sets with valve stem seals, and full gasket sets
  • Thermostat gaskets and crankshaft seal sets
  • Feed pump O-rings and sealing rings for the fuel filter
  • Radiator hoses, including the bypass hose
  • Filter glass

The glass bowl on the fuel pre-filter is worth a look at every service. If water or dirt has settled at the bottom, drain it before it reaches the pump. Refit the bowl with a new seal and bleed the line. When you replace a radiator hose, renew rusty clamps too, because a new hose under an old clamp will still weep.

Clutch, steering and linkage

For the clutch there are clutch plates from LUK. Steering is covered by ball joints, the three point linkage by complete lifting spindles and pivot pins. You will also find bushes, hydraulic pump seals and HELLA flasher units.

Play in a ball joint shows up as vague steering. Have someone rock the steering wheel back and forth while you watch the joints, and the worn one will give itself away.

Set a new lifting spindle to length once it is fitted. Turn both spindles until the lower links sit at the same height, or the implement will hang crooked. Grease the thread, because a seized spindle is very hard to adjust later. Pivot pins and bushes in the linkage are best renewed together, as a new pin in a worn bush soon has play again.

An upper head gasket set with valve stem seals is meant for anyone taking the head off. Have the head checked for flatness while it is off and always fit the new stem seals. Worn seals let oil run down the valve stems, which shows as blue smoke on a cold start.

Identifying the right part

On a tractor of this age the type plate is sometimes hard to read. The reference number on the old part then helps, stamped into a casting or printed on a gasket. For lifting spindles and ball joints, measure the length and thread of the old one.

These tractors from the same series have their own pages:

For any other model from the brand, start from Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart