Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH 485 tractor parts & technical data

The Case IH 485, also known as IHC 485, is covered here with more than 200 items, from steering and front axle parts to vintage parts, brakes and transmission.

221 parts found for Case IH 485
Show:
Ring front crankshaft seal Case IH 884, Series 32-4240, E 353-2706
Bush for crankshaft seal, front Case IH 884, Series 32-4240
€161,53 €133,50 €148,61 €122,82
You save 8%
Connecting rod bearing undersize 0,25 mm, width 32 mm Case IH
Dimensions: Width 32 mm, undersize 0.25 mm. More
Dimensions: Width 32 mm, undersize 0.25 mm.
€25,29 €20,90
Thrust bearing undersize 0,25 mm Case IH
Dimensions: Undersize 0.25 mm. More
Dimensions: Undersize 0.25 mm.
€92,37 €76,34 €84,98 €70,23
You save 8%
Radiator hose by-pass Ø 50 mm Case IH
Inner Ø: 50 mm. More
Inner Ø: 50 mm.
€28,19 €23,30
Radiator cap Ø 55 mm, height 24 mm
Neck Ø: 55 mm. Height: 24 mm. More
Neck Ø: 55 mm. Height: 24 mm.
€23,68 €19,57
Water pump with gasket Ø 98 mm, A 107 mm, B 22 mm Case IH
Dimensions: Impeller Ø 98, A: 107, B: 22 mm. More
Dimensions: Impeller Ø 98, A: 107, B: 22 mm.
€121,58 €100,48 €111,85 €92,44
You save 8%
Optibelt V-belt single for engine cooling
€38,34 €31,68
Cylinder head gasket engine D-155, D-179 Case IH
€59,47 €49,15 €54,71 €45,22
You save 8%
Cylinder head gasket set upper with valve stem seal engine D-155, D-179 Case IH
Additional information: With valve stem seal. More
Additional information: With valve stem seal.
€48,64 €40,20 €44,75 €36,98
You save 8%
Thrust bearing standard Case IH
€79,24 €65,49 €72,90 €60,25
You save 8%
Drain valve thread Ø 16 mm, hose connection Ø 14 mm Case IH
Thread: Ø 16 mm, Hose connection Ø 14 mm. Description: To fit Case IH: 248, 258, 268, 278, 385, 485, 584, 585, 684, 685, 743, 743XL, 745S, 745XL, 78... More
Thread: Ø 16 mm, Hose connection Ø 14 mm. Description: To fit Case I...
€50,66 €41,87 €46,61 €38,52
You save 8%
Nut for clevis thread 7/8 UNC Case IH
Dimensions: Thread = 7/8" UNC mm. More
Dimensions: Thread = 7/8" UNC mm.
€32,76 €27,08
Yoke upper 470 mm, Ø 16 mm, thread 7/8 UNC Case IH
Dimensions: Ø = 16, Length = 470, Thread = 7/8" UNC mm. More
Dimensions: Ø = 16, Length = 470, Thread = 7/8" UNC mm.
€109,98 €90,89 €101,18 €83,62
You save 8%
Clevis bottom Ø 19,5 mm, clevis width 24 mm Case IH
Dimensions: Ø = 19.5, Clevis width = 24 mm. More
Dimensions: Ø = 19.5, Clevis width = 24 mm.
€137,25 €113,43 €126,27 €104,36
You save 8%
Contact switch mechanical clutch pedal
Version: Switch top and bottom clutch pedal. More
Version: Switch top and bottom clutch pedal.
€105,30 €87,02 €96,88 €80,06
You save 8%
HELLA Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€14,05 €11,61
O-ring feed pump Ø 32 x 2,5 mm engine Case IH 248-4240
To fit as: Case IH 554, 624, 644, 654, 724, 824, 744, 844, 844S, 946, 1046, 1246, 955, 1055, 1255, 1455, 743XL, 745XL, 844XL, 856XL, 956XL, 1056XL, 12... More
To fit as: Case IH 554, 624, 644, 654, 724, 824, 744, 844, 844S, 946, ...
€11,50 €9,50
ZF Pivot pin Ø 94 mm, thickness 59,5 mm ZF front axle 4472063003
€98,54 €81,44 €90,66 €74,92
You save 8%
Exhaust manifold Case IH 475-884, Series 85-2500, Hydro 84
€119,82 €99,02 €110,23 €91,10
You save 8%
Cylinder head bolt 9/16" x 146 mm Case IH
Dimensions: 9/16" x 146 mm. More
Dimensions: 9/16" x 146 mm.
€46,36 €38,31 €42,65 €35,25
You save 8%
Inlet valve Case IH 353-1246
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal.
€14,78 €12,21
Showing 193 - 221 of 221

Case IH 485 parts

The Case IH 485, still known to many as the IHC 485, is a tractor that tends to be repaired rather than replaced. It belongs to the 85 series, and this page has more than 200 parts for it from GRANIT, ZF, HELLA, LUK and VICTOR REINZ. A good number are gaskets and seals, which is what you need once the engine or hydraulics come apart.

Engine overhaul

  • Upper cylinder head gasket sets with valve stem seals, and full gasket sets
  • Thermostat gaskets and crankshaft seal sets
  • Feed pump O-rings and sealing rings for the fuel filter
  • Radiator hoses, including the bypass hose
  • Filter glass

The glass bowl on the fuel pre-filter is worth a look at every service. If water or dirt has settled at the bottom, drain it before it reaches the pump. Refit the bowl with a new seal and bleed the line. When you replace a radiator hose, renew rusty clamps too, because a new hose under an old clamp will still weep.

Clutch, steering and linkage

For the clutch there are clutch plates from LUK. Steering is covered by ball joints, the three point linkage by complete lifting spindles and pivot pins. You will also find bushes, hydraulic pump seals and HELLA flasher units.

Play in a ball joint shows up as vague steering. Have someone rock the steering wheel back and forth while you watch the joints, and the worn one will give itself away.

Set a new lifting spindle to length once it is fitted. Turn both spindles until the lower links sit at the same height, or the implement will hang crooked. Grease the thread, because a seized spindle is very hard to adjust later. Pivot pins and bushes in the linkage are best renewed together, as a new pin in a worn bush soon has play again.

An upper head gasket set with valve stem seals is meant for anyone taking the head off. Have the head checked for flatness while it is off and always fit the new stem seals. Worn seals let oil run down the valve stems, which shows as blue smoke on a cold start.

Identifying the right part

On a tractor of this age the type plate is sometimes hard to read. The reference number on the old part then helps, stamped into a casting or printed on a gasket. For lifting spindles and ball joints, measure the length and thread of the old one.

These tractors from the same series have their own pages:

For any other model from the brand, start from Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart