Menu
EUR

Case IH 695 XL tractor parts & technical data

Whether you call it Case IH 695 XL or IHC 695 XL, this page has more than 250 fitting parts. Steering and front axle, lighting and electrics lead the range.

272 parts found for Case IH 695 XL
Show:
Gasket set lower Case IH 474-884, Series 32-4240, Hydro 84
Additional information: Without cylinder liner gasket set. Menke no.: 59577. More
Additional information: Without cylinder liner gasket set. Menke no.: ...
€64,36 €53,19 €59,21 €48,93
You save 8%
Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€16,03 €13,24
External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€8,15 €6,74
SACHS Clutch plate 310 CCE, 23,4 x 28,9 mm, 10 splines sintered Case IH
SACHS
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€387,65 €320,37 €356,64 €294,74
You save 8%
LUK Clutch kit Case IH 248 - 3434
LUK
Contents: Pressure plate 458128005511, clutch plate 458328017542 More
Contents: Pressure plate 458128005511, clutch plate 458328017542
€684,66 €565,83 €629,89 €520,57
You save 8%
Clutch master cylinder Case IH, New Holland
€209,21 €172,90 €192,47 €159,07
You save 8%
Starter switch 12 / 24 V, 7 blade terminals, M26 x 1,5, 2 keys
Version: Operating voltage: 12 V/24 V 7 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm) Locking cylinder with water protection 2 keys (type A 14607) Number... More
Version: Operating voltage: 12 V/24 V 7 blade terminals (6.3 x 0.8 / 9...
€76,91 €63,56 €70,76 €58,48
You save 8%
Axial joint 180 mm, M20 x 1,5, M22 x 1,5, 30°, Ø 35 mm
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø E: 35 mm. More
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø...
€69,51 €57,45 €63,95 €52,85
You save 8%
Ring gear Ø 405/371 mm, 126 teeth Case IH
Version: Ø 405/371 mm  126 teeth. More
Version: Ø 405/371 mm  126 teeth.
€78,79 €65,12 €72,49 €59,91
You save 8%
Side plate gasket engine block Case IH
€35,47 €29,31 €32,63 €26,97
You save 8%
Lifting spindle complete 580 - 710 mm, thread 7/8", yoke 45 mm Case IH
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø top = 16, Ø bottom = 19, Clevis width = 45 mm. More
Dimensions: Length min. = 580, Length max. = 710, Thread = 7/8", Ø to...
€172,85 €142,85 €159,02 €131,42
You save 8%
HELLA Rocker switch on/off 12/24 V, 16 A, 2 blade connections
HELLA
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at 24 V, 2 blade terminals. To operate: Kippbetätigung. Switching function: ohne K... More
Version: On/off switch, 12 V/24 V, power rating: 16 A at 12 V, 8 A at ...
€21,31 €17,61
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€72,92 €60,26 €67,09 €55,44
You save 8%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€38,51 €31,83 €37,08 €30,65
You save 4%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€50,77 €41,96 €46,71 €38,60
You save 8%
Main power switch 12 V, 30 A, 2 schraubkontakt
Version: 12 V / 30 A, 2 screw connections. More
Version: 12 V / 30 A, 2 screw connections.
€128,80 €106,45 €118,50 €97,93
You save 8%
Door right Case IH 485XL-4240
Tractor types: Case IH 485XL, 495XL, 585XL, 595XL, 685XL, 743XL, 745XL, 785XL, 844XL, 845XL, 856 XL, 885XL, 956XL, 995, 1056XL, 1255XL, 1455XL, 3220, ... More
Tractor types: Case IH 485XL, 495XL, 585XL, 595XL, 685XL, 743XL, 745XL...
€836,50 €691,32 €769,58 €636,02
You save 8%
HELLA Bulb R10W 12 V, 10 W, BA15s - 10 pieces
HELLA
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | Power (watts): 10 More
Type: R10W | Voltage (V): 12 | Socket: BA15s | Bulb: Konventionell | P...
€18,94 €15,65
SACHS Thrust bearing 60 x 102 x 20,5 mm Case IH 238 - 4240
SACHS
Dimensions (mm): 60 x 102 x 20.5 More
Dimensions (mm): 60 x 102 x 20.5
€99,18 €81,97 €91,25 €75,41
You save 8%
Elring Cylinder head gasket set with valve stem seal engine D-206, D-239, D-268
Elring
Additional information: With valve stem seal More
Additional information: With valve stem seal
€202,15 €167,07 €185,98 €153,70
You save 8%
Axial joint 176 mm, M20 x 1,5, M18 x 1,5 L, Ø 52 mm, Ø 35 mm, 25 °
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. Ø B: 52 mm. Ø E: 35 mm. More
A: 176 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. Ø B: 52 mm. ...
€76,07 €62,87 €69,98 €57,84
You save 8%
Ball joint 255 mm, taper 20 - 22,2 mm, M18 x 1,5, M22 x 1,5
A: 255 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 255 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tap...
€83,90 €69,34 €77,19 €63,79
You save 8%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€75,38 €62,30 €69,35 €57,31
You save 8%
VICTOR REINZ Gasket set complete engine D-206 - D-268 Case IH
€420,84 €347,80 €387,17 €319,98
You save 8%
O-ring oil pump Case IH
Button thread M5 Case IH 784-884, Series 32-4240, D 440
€35,10 €29,01 €32,29 €26,69
You save 8%
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
€48,95 €40,45 €45,03 €37,22
You save 8%
Piston set complete Ø 98,43 mm, combustion chamber 56 mm Case IH
Dimensions: 3 rings, Ø 98.43 mm, gudgeon pin Ø 36 x 82 mm, combustion chamber Ø 56 mm, Combustion chamber depth 25 mm. Description: Supplied withou... More
Dimensions: 3 rings, Ø 98.43 mm, gudgeon pin Ø 36 x 82 mm, combustio...
€128,76 €106,41 €118,46 €97,90
You save 8%
Gas strut door 350 N, 242 mm, stroke 70 mm Case IH 7514GV
suitable for: Tür. Newtons: 350. A: 242 mm. B: 151 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 70 mm. To fit: Door. More
suitable for: Tür. Newtons: 350. A: 242 mm. B: 151 mm. C: 8 mm. D: 8 ...
€54,68 €45,19 €50,31 €41,57
You save 8%
HELLA Symbol hazard lights red
HELLA
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Warndreieck. More
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalte...
€3,00 €2,48
Relays step relay main headlights 12 V / 150 W, 5-pin, with holder
Version: 12 V / 150 W, For headlights, for switching between full and dipped beam, With bracket, 5-pin, blade terminals. Width: 31,9 mm. Height: 30,5 ... More
Version: 12 V / 150 W, For headlights, for switching between full and ...
€92,85 €76,74 €85,42 €70,60
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
External plate Hi-Lo 1,5 mm, inner 98 mm, outer 125 mm Case IH
Version: thickness = 1,5 mm inner = 98 mm outer = 125 mm More
Version: thickness = 1,5 mm inner = 98 mm outer = 125 mm
€38,48 €31,80
CARLISLE Repair set clutch cylinder Case IH 3210 - 4240, CX 50 - CX 100
€40,85 €33,76 €37,58 €31,06
You save 8%
External plate PTO shaft 1,6 mm, inner 98,4 mm, outer 139,7 mm, 12 teeth
Version: Thickness: 1.6 mm Inner: 98.4 mm Outer: 139.7 mm 12 teeth More
Version: Thickness: 1.6 mm Inner: 98.4 mm Outer: 139.7 mm 12 teeth
€16,58 €13,70
External plate PTO clutch 2 mm, inner 98,4 mm, outer 139,7 mm
Version: thickness = 2 mm inner = 98,4 mm outer 139,7 mm More
Version: thickness = 2 mm inner = 98,4 mm outer 139,7 mm
€24,78 €20,48
HELLA Starter motor 12 V, 1,1 kW, 9 teeth, Ø 74 mm, clockwise
€334,60 €276,53 €322,25 €266,33
You save 4%
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€37,68 €31,14 €34,67 €28,65
You save 8%
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17,9 mm. More
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper:...
€62,98 €52,05 €57,94 €47,89
You save 8%
Radiator Case IH 485 XL - 885 XL, 595 XL - 895 XL, 288
To fit as: Case IH Series 85: 485 XL–885 XL; Series 95: 595 XL–895 XL; Series 200: 288 More
To fit as: Case IH Series 85: 485 XL–885 XL; Series 95: 595 XL–895...
€988,37 €816,83 €909,30 €751,49
You save 8%
Nozzle cap Case IH
€70,08 €57,92 €64,47 €53,28
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
Showing 49 - 96 of 272

Case IH 695 XL parts for engine rebuilds and upkeep

The Case IH 695 XL, which many farmers still call the IHC 695 XL, often gets a second life through an engine rebuild. This page lists more than 250 replacement parts for this tractor, from manufacturers including GRANIT, HELLA, ZF, KS and Carraro.

Rebuilding the engine

For an overhaul there are complete piston sets and piston ring sets, backed up by gaskets and O-rings, for instance for the feed pump and the thermostat. The brass bushes that hold the injector nozzle holders are here too.

A word on those bushes: they separate the coolant from the combustion chamber. If you see bubbles in the radiator or coolant disappears without a visible leak, a failed bush may be the cause. Replace them whenever you rebuild, since the head is already on the bench. With new piston rings, check the ring gap by pushing each ring squarely into the bore and measuring before it goes onto the piston.

Cooling, steering and driveline

Around the cooling system there are radiator hoses, such as the by-pass hose, and thermostat gaskets. The by-pass hose is often awkward to reach and tends to get forgotten. Replace it along with the thermostat, since everything is already open. For the front axle and steering there are axial joints and ball joints, which announce wear through play at the steering wheel. In the driveline you will find clutch packs with internal and external plates.

Cab and electrics

Gas struts hold the cab door open, and one that no longer holds is more than a nuisance on a windy day. For the lights there are work lamps, rocker switches and flasher units. If the indicators suddenly flash twice as fast, a bulb has usually blown. If they stop flashing altogether, suspect the flasher unit first.

  • piston sets and piston ring sets
  • nozzle holder bushes, gaskets and O-rings
  • radiator hoses and sealing rings
  • axial joints and ball joints
  • work lamps, rocker switches and flasher units

From type plate to engine number

The type plate on your 695 XL confirms the model, but for an engine rebuild the number on the block matters just as much. Pistons and rings are matched to the bore, so measure the cylinders before you order. For individual parts, the reference number on the old component is a good guide.

The same series also includes the Case IH 695 and the Case IH 895 XL. Each has its own page, so pick the one matching the model on your type plate. Other Case IH and IHC tractors are under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart