Menu
EUR

Case IH 695 tractor parts & technical data

For the Case IH 695, also known as the IHC 695, this page lists more than 200 fitting parts, such as steering and front axle parts, lighting and electrics.

222 parts found for Case IH 695
Show:
ZF Bush 37 x 41 x 32 mm ZF front axle 4472059051
€57,22 €47,29 €52,64 €43,51
You save 8%
ZF Pivot pin Ø 88 mm, thickness 50,5 mm ZF front axle 4472059051
€257,27 €212,62 €236,69 €195,61
You save 8%
Fork shaft double joint Carraro front axle 145281 Case IH, Renault
€258,97 €214,02 €238,25 €196,90
You save 8%
Bush 115 x 125 x 42 mm Case IH
€56,28 €46,51 €51,78 €42,79
You save 8%
Seal kit steering cylinder Case IH 464-884, Series 32-4240, Hydro 84
ZF Disc ZF front axle 4472050013
€89,14 €73,67 €82,01 €67,78
You save 8%
ZF Universal joint 27 x 71 mm, maintenance-free ZF
€164,38 €135,85 €151,23 €124,98
You save 8%
Axial joint 180 mm, M20 x 1,5, M18 x 1,5 L, 25 °
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °. More
A: 180 mm. C: M20 x 1,5 mm. D: M18 x 1,5 L mm. F: 25 °.
€66,39 €54,87 €61,08 €50,48
You save 8%
Universal joint 27 x 71 mm, maintenance-free
A: 27 mm. B: 71 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 27 mm. B: 71 mm. Universal joint size: . Lubrication system: Mainte...
€96,64 €79,87 €88,91 €73,48
You save 8%
Brake disc Ø 258 mm, 15 teeth, thickness 7,8 mm Case IH
€123,61 €102,16 €113,72 €93,98
You save 8%
KS Piston ring set 3 rings, Ø 100 mm, 3,16/3,16/4,747 mm Case IH
KS
Dimensions: 3 rings, Ø 100 mm, 3.16 mm (trapezoidal ring) / 3.16 mm (trapezoidal ring) / 4.747 mm. More
Dimensions: 3 rings, Ø 100 mm, 3.16 mm (trapezoidal ring) / 3.16 mm (...
€48,04 €39,70 €44,20 €36,53
You save 8%
Gasket front cover engine D-155 - D-358, DT-358, DT-402 Case IH
€37,44 €30,94 €34,44 €28,47
You save 8%
Repair set water pump Case IH
€61,36 €50,71 €56,45 €46,65
You save 8%
Thermostat Ø 54 mm, 82 °C Case IH 3210-4240
Ø: 54 mm. Temperature: 82 °C. More
Ø: 54 mm. Temperature: 82 °C.
€36,11 €29,85
Piston ring set Ø 100 mm, 3,15 / 2,4 / 4,75 mm rectangular ring
Dimensions: 3 rings, Ø 100 mm, 3.15 mm (rectangular ring) / 2.4 mm / 4.75 mm. More
Dimensions: 3 rings, Ø 100 mm, 3.15 mm (rectangular ring) / 2.4 mm / ...
€38,16 €31,54
Connecting rod bush Case IH
Cylinder head gasket set upper with valve stem seal Case IH
Additional information: With valve stem seal. More
Additional information: With valve stem seal.
€190,63 €157,55 €175,38 €144,94
You save 8%
Tank cap
€19,15 €15,83
Threaded spindle 7/8 UNC thread, length 462 mm Case IH
Dimensions: Length = 462, Thread = 7/8" UNC mm. More
Dimensions: Length = 462, Thread = 7/8" UNC mm.
€114,50 €94,63 €105,34 €87,06
You save 8%
Rear-view mirror David Brown Case IH Series 32-4240, D 440
€56,34 €46,56 €51,83 €42,84
You save 8%
Blade fuse standard 32 V, 30 A, green - 50 pieces
Type: Standard | Voltage (V): 32 | Nominal current (A): 30 | Colour: Green | Width (mm): 19,05 | Height (mm): 18,54 | Depth (mm): 5 | Contents: 50x 30... More
Type: Standard | Voltage (V): 32 | Nominal current (A): 30 | Colour: G...
€20,03 €16,55
Thermostat gasket 74702038 Case IH 248-4240
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 533, 553, 633, 733, 833, 840, 940, 644, 743, 744, 745, 845, 844, 844S, 946, 1046,... More
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 5...
€3,95 €3,26
ZF Oil seal 37 x 52 x 14 mm ZF front axle 4475002002
€58,38 €48,25 €53,71 €44,39
You save 8%
ZF Roller bearing ZF front axle 4472059051, 47 x 22,606 x 15,5 mm
€94,36 €77,98 €86,81 €71,74
You save 8%
ZF Pivot pin Ø 94 mm, thickness 59,5 mm ZF front axle 4472063003
€98,54 €81,44 €90,66 €74,92
You save 8%
Carraro Bearing bush front axle 30 x 34 x 30 mm John Deere, Massey Ferguson, Case IH
Carraro
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm. More
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm.
€9,55 €7,89
Carraro Bronze bearing Ø 38,3 x 34,9 x 34,5 mm Case IH
Carraro
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm. More
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm.
€7,10 €5,87
Showing 145 - 192 of 222

Case IH 695 parts for the axle, engine and PTO

Plenty of these tractors still carry the IHC 695 name on the hood, and it is the same model as the Case IH 695. More than 200 new parts are listed for it here, from GRANIT, ZF, HELLA, Carraro and LUK among others.

Front axle and steering

Axle bearings, axial joints and ball joints cover the front axle and the steering. Play in the steering usually comes from a worn ball joint or axial joint. With the engine running, have someone rock the steering wheel while you watch the joints. If the ball moves in its housing before the wheel responds, it needs replacing.

Engine

  • pistons and piston ring sets for a rebuild
  • crankshaft seal sets
  • O-rings and sealing rings, for example on the feed pump
  • thermostat gaskets
  • brass bushes for the nozzle holders
  • radiator hoses

PTO clutch and electrics

For the PTO clutch there are internal and external plates. Replace them as a full set, and when you strip the pack look for blued or warped plates, which tell you the clutch has been slipping. On the electrical side you will find flasher units and rocker switches.

Matching parts to your 695

The serial plate shows if you have a 695 or a 695 XL, and that difference matters. After that, the old part settles it. Gaskets, plates and joints often have a number on them that you can compare with the product details.

Indicators and switches

If the indicators suddenly flash twice as fast, it is usually a blown bulb rather than a faulty flasher unit. Check every bulb and the earth on the rear lights first. If the fault stays, then the flasher unit is due. When converting to LED lighting, bear in mind that a standard flasher unit does not always cope with it. Rocker switches on the dash wear inside at the contacts. A switch that runs warm or needs flicking several times before the lamp comes on should be replaced. At this age, check the radiator hoses every season for fine cracks at the ends, where they fail first.

When working on the front axle, replace the axle bearings on each side together with the seal next to them. A new bearing behind an old, leaking seal will not last, because dirt and water find their way straight in.

Close relatives

The Case IH 695 XL and the Case IH 895 XL come from the same series and each have a page with the parts for that model, so there is no need to guess which version a part was meant for. The rest of the brand is on Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart