Menu
EUR

Case IH 695 tractor parts & technical data

For the Case IH 695, also known as the IHC 695, this page lists more than 200 fitting parts, such as steering and front axle parts, lighting and electrics.

222 parts found for Case IH 695
Show:
Sealing ring Case IH
Brake plate outer Ø 259,1 mm, inner Ø 206,2 mm, 7 mm thick, 3 teeth
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206,2 mm. More
Thickness: 7 mm. Number of teeth: 3. Outer Ø: 259,1 mm. Inner Ø: 206...
€89,77 €74,19 €82,59 €68,25
You save 8%
Ring front crankshaft seal Case IH 884, Series 32-4240, E 353-2706
Bush for crankshaft seal, front Case IH 884, Series 32-4240
€161,53 €133,50 €148,61 €122,82
You save 8%
Connecting rod bearing undersize 0,25 mm, width 32 mm Case IH
Dimensions: Width 32 mm, undersize 0.25 mm. More
Dimensions: Width 32 mm, undersize 0.25 mm.
€25,29 €20,90
Radiator hose by-pass Ø 50 mm Case IH
Inner Ø: 50 mm. More
Inner Ø: 50 mm.
€28,19 €23,30
Radiator cap Ø 55 mm, height 24 mm
Neck Ø: 55 mm. Height: 24 mm. More
Neck Ø: 55 mm. Height: 24 mm.
€23,68 €19,57
Water pump with gasket Ø 98 mm, A 107 mm, B 22 mm Case IH
Dimensions: Impeller Ø 98, A: 107, B: 22 mm. More
Dimensions: Impeller Ø 98, A: 107, B: 22 mm.
€121,58 €100,48 €111,85 €92,44
You save 8%
Crankshaft, 4-cylinder standard, including gear wheel Case IH
Notes: Please follow the instructions in the installation guide. Please complete the test instruction report contained therein, and return it to garan... More
Notes: Please follow the instructions in the installation guide. Pleas...
€1.896,47 €1.567,33 €1.794,75 €1.483,26
You save 5%
Silencer 1145 mm, Ø 60/50 mm Case IH series 85, 95, 200
Version: Length: 1145 mm, Inlet Ø: 60 mm, Outlet Ø: 50 mm. More
Version: Length: 1145 mm, Inlet Ø: 60 mm, Outlet Ø: 50 mm.
€157,48 €130,15 €144,88 €119,74
You save 8%
Cylinder head bolt 9/16" x 123 mm Case IH
Dimensions: 9/16" x 123 mm. Menke no.: 117911. More
Dimensions: 9/16" x 123 mm. Menke no.: 117911.
€38,65 €31,94
Thrust bearing standard Case IH
€79,24 €65,49 €72,90 €60,25
You save 8%
Nut for clevis thread 7/8 UNC Case IH
Dimensions: Thread = 7/8" UNC mm. More
Dimensions: Thread = 7/8" UNC mm.
€32,76 €27,08
Yoke upper 470 mm, Ø 16 mm, thread 7/8 UNC Case IH
Dimensions: Ø = 16, Length = 470, Thread = 7/8" UNC mm. More
Dimensions: Ø = 16, Length = 470, Thread = 7/8" UNC mm.
€109,98 €90,89 €101,18 €83,62
You save 8%
Clevis bottom Ø 19,5 mm, clevis width 24 mm Case IH
Dimensions: Ø = 19.5, Clevis width = 24 mm. More
Dimensions: Ø = 19.5, Clevis width = 24 mm.
€137,25 €113,43 €126,27 €104,36
You save 8%
Start safety switch contact function, 2 blade connections
Version: Contact function, With 2 blade terminals. More
Version: Contact function, With 2 blade terminals.
€127,58 €105,44 €117,37 €97,00
You save 8%
HELLA Relays changeover contact 12 V, 30 - 40 A, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€14,05 €11,61
O-ring feed pump Ø 32 x 2,5 mm engine Case IH 248-4240
To fit as: Case IH 554, 624, 644, 654, 724, 824, 744, 844, 844S, 946, 1046, 1246, 955, 1055, 1255, 1455, 743XL, 745XL, 844XL, 856XL, 956XL, 1056XL, 12... More
To fit as: Case IH 554, 624, 644, 654, 724, 824, 744, 844, 844S, 946, ...
€11,50 €9,50
Exhaust manifold Case IH 475-884, Series 85-2500, Hydro 84
€119,82 €99,02 €110,23 €91,10
You save 8%
Thrust bearing undersize 0,25 mm Case IH
Dimensions: Undersize 0.25 mm. More
Dimensions: Undersize 0.25 mm.
€92,37 €76,34 €84,98 €70,23
You save 8%
Cylinder head bolt 9/16" x 146 mm Case IH
Dimensions: 9/16" x 146 mm. More
Dimensions: 9/16" x 146 mm.
€46,36 €38,31 €42,65 €35,25
You save 8%
Inlet valve Case IH 353-1246
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal.
€14,78 €12,21
Showing 193 - 222 of 222

Case IH 695 parts for the axle, engine and PTO

Plenty of these tractors still carry the IHC 695 name on the hood, and it is the same model as the Case IH 695. More than 200 new parts are listed for it here, from GRANIT, ZF, HELLA, Carraro and LUK among others.

Front axle and steering

Axle bearings, axial joints and ball joints cover the front axle and the steering. Play in the steering usually comes from a worn ball joint or axial joint. With the engine running, have someone rock the steering wheel while you watch the joints. If the ball moves in its housing before the wheel responds, it needs replacing.

Engine

  • pistons and piston ring sets for a rebuild
  • crankshaft seal sets
  • O-rings and sealing rings, for example on the feed pump
  • thermostat gaskets
  • brass bushes for the nozzle holders
  • radiator hoses

PTO clutch and electrics

For the PTO clutch there are internal and external plates. Replace them as a full set, and when you strip the pack look for blued or warped plates, which tell you the clutch has been slipping. On the electrical side you will find flasher units and rocker switches.

Matching parts to your 695

The serial plate shows if you have a 695 or a 695 XL, and that difference matters. After that, the old part settles it. Gaskets, plates and joints often have a number on them that you can compare with the product details.

Indicators and switches

If the indicators suddenly flash twice as fast, it is usually a blown bulb rather than a faulty flasher unit. Check every bulb and the earth on the rear lights first. If the fault stays, then the flasher unit is due. When converting to LED lighting, bear in mind that a standard flasher unit does not always cope with it. Rocker switches on the dash wear inside at the contacts. A switch that runs warm or needs flicking several times before the lamp comes on should be replaced. At this age, check the radiator hoses every season for fine cracks at the ends, where they fail first.

When working on the front axle, replace the axle bearings on each side together with the seal next to them. A new bearing behind an old, leaking seal will not last, because dirt and water find their way straight in.

Close relatives

The Case IH 695 XL and the Case IH 895 XL come from the same series and each have a page with the parts for that model, so there is no need to guess which version a part was meant for. The rest of the brand is on Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart