Menu
EUR

Case IH 740 tractor parts & technical data

Case IH 740 or IHC 740, the name on the bonnet makes no difference here: more than 250 items for this tractor, including trailer couplings and oldtimer parts.

299 parts found for Case IH 740
Show:
Track rod 970 mm, M20 x 1,5, taper 17 - 20 mm, Ø 28 mm
A: 955 - 985 mm. B: M20 x 1,5 mm. C: 17 - 20 mm. G: . D: Ø20 / M14 x 1,5 mm. E: 28 mm. More
A: 955 - 985 mm. B: M20 x 1,5 mm. C: 17 - 20 mm. G: . D: Ø20 / M14 x ...
€278,99 €230,57 €256,67 €212,12
You save 8%
Drive shaft 1135 mm IHC 533-940
Length: 1135 mm. More
Length: 1135 mm.
€1.061,66 €877,41 €976,73 €807,21
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Gasket water channel Case IH Series 85-1455 XL, D 440
€41,25 €34,09 €37,95 €31,36
You save 8%
O-ring oil pump Case IH
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
€48,95 €40,45 €45,03 €37,22
You save 8%
Operating lever steering valve, length 200 mm Case IH
Technical data: Length: 200 mm. More
Technical data: Length: 200 mm.
€112,02 €92,58 €103,06 €85,17
You save 8%
Bosch/Rexroth Hydraulic pump 8 cm³/rpm., taper 1:5, Ø 17 x 17 mm, anticlockwise
Bosch/Rexroth
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotation: Anticlockwise. Line connection suction side: Ø 40mm, 4-Loch, M6. ... More
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction...
€313,17 €258,82 €288,12 €238,11
You save 8%
Pin 16 x 60 mm Case IH 433-1246, D 440
Dimensions: 16 x 60 mm. More
Dimensions: 16 x 60 mm.
€27,94 €23,09
Window rubber clamping range 2 - 4 mm, b 8 mm, h 32 mm - 5 meter Case IH
Clamping range: 2 - 4 mm. Length: 5 m. B: 8 mm. H: 32 mm. More
Clamping range: 2 - 4 mm. Length: 5 m. B: 8 mm. H: 32 mm.
€65,93 €54,49 €60,66 €50,13
You save 8%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
HELLA Symbol hazard lights red
HELLA
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Warndreieck. More
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalte...
€3,00 €2,48
Relays step relay main headlights 12 V / 150 W, 5-pin, with holder
Version: 12 V / 150 W, For headlights, for switching between full and dipped beam, With bracket, 5-pin, blade terminals. Width: 31,9 mm. Height: 30,5 ... More
Version: 12 V / 150 W, For headlights, for switching between full and ...
€92,85 €76,74 €85,42 €70,60
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
Alternator 14 V / 33 A, form B, flange 56,0 mm
To fit as: Case IH, Goldoni More
To fit as: Case IH, Goldoni
€193,98 €160,31 €178,46 €147,49
You save 8%
Double hydraulic pump 8 + 8 cm³/rpm., taper 1:5 Case IH
€471,97 €390,06 €434,21 €358,85
You save 8%
Thermostat Ø 54 mm, 82 °C Case IH 268-2500, E 353-1455 XL
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 533, 553, 633, 733, 833, 840, 940, 644, 743, 744, 745, 845, 844, 844S, 946, 1046,... More
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 5...
€27,28 €22,54
Thrust bearing driving clutch 65 x 101,6 x 17 mm Case IH 323 - 940
Dimensions (mm): 65 x 101.6 x 17 More
Dimensions (mm): 65 x 101.6 x 17
€72,60 €60,00 €66,79 €55,20
You save 8%
MAHLE Starter motor 12 V, 2,7 kW, 11 teeth, clockwise, mounting angle r 140
€568,64 €469,95 €340,58 €281,48
You save 40%
Ball joint 70 mm, 20 mm, M20 x 1,5, taper 20 mm
A: 70 mm. C: 20 mm. D: M20 x 1,5 mm. E: 20 mm. F: 20 mm. Taper: 20 mm. More
A: 70 mm. C: 20 mm. D: M20 x 1,5 mm. E: 20 mm. F: 20 mm. Taper: 20 mm.
€44,99 €37,18 €41,39 €34,21
You save 8%
Pipework water pump Case IH 440-940, E 353-1455 XL
€601,92 €497,45 €553,77 €457,66
You save 8%
VICTOR REINZ Gasket set complete engine D-206 - D-268 Case IH
€420,84 €347,80 €387,17 €319,98
You save 8%
Button thread M5 Case IH 784-884, Series 32-4240, D 440
€35,10 €29,01 €32,29 €26,69
You save 8%
Nozzle cap Case IH
€70,08 €57,92 €64,47 €53,28
You save 8%
Radiator hose by-pass inner-Ø 38 mm Case IH 433-1455 XL
€12,01 €9,93
Radiator hose by-pass inner-Ø 38 mm Case IH 433-940, E 353-1246
€9,14 €7,55
Radiator hose, bottom inner-Ø 47 mm, length 165 mm Case IH 433-1246
Inner Ø: 47 mm. Length: 165 mm. More
Inner Ø: 47 mm. Length: 165 mm.
€13,09 €10,82
Connecting rod bearing standard, width 32 mm Case IH
Dimensions: Width 32 mm. More
Dimensions: Width 32 mm.
€29,81 €24,64
Silencer vertical 1330 mm, inner Ø 60 mm, exhaust Ø 45 mm
Version: Length: 1330 mm, Inner Ø: 60 mm, Outlet Ø: 45 mm. Menke no.: 59847. More
Version: Length: 1330 mm, Inner Ø: 60 mm, Outlet Ø: 45 mm. Menke no....
€129,21 €106,79 €118,87 €98,24
You save 8%
Fuel hose of fuel tank to additional tank Case IH 440-940
€54,55 €45,08 €50,19 €41,48
You save 8%
Steering valve ew/dw with float position 220 bar, 40 l/min, system SB1
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: max. 40 l/min., Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 180... More
Technical data: Max. operating pressure: 210 bar, Nominal flow rate: m...
€591,78 €489,07 €544,44 €449,95
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
HELLA Rocker switch combination switch locks in place, 5 connections 6,3 mm
HELLA
Version: Without light, 5 blade terminal connections 6.3 mm, 3 switch positions 0: off 1 and 2: on, rocking operation. More
Version: Without light, 5 blade terminal connections 6.3 mm, 3 switch ...
€25,25 €20,87
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
HELLA Rear light right Case IH, Deutz-Fahr, Fendt, John Deere, Steyr
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 743 XL, 745 XL, 844 XL, 845 XL, 856 XL, 955, 956, 956 XL, 1055, 1056, 1056 X... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€28,56 €23,61
HELLA Indicator / position light left IHC, Deutz-Fahr, Fendt, Kubota
HELLA
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 940, 644, 744, 844, 844 S, 485XL, 585XL, 685XL, 743XL, 745XL, 785XL, 844XL, 856XL... More
To fit as: Case IH 433, 533, 633, 733, 833, 440, 540, 640, 740, 840, 9...
€23,68 €19,57
MANN-FILTER Secondary air filter CF600
MANN-FILTER
suitable main filter 565C13114.4 More
suitable main filter 565C13114.4
€64,08 €52,95
Holder marker lights Case IH 440 - 1246, D 440
€58,21 €48,11 €53,55 €44,26
You save 8%
Seal kit for steering cylinder Case IH 433-940, D 440
€64,80 €53,55 €59,62 €49,27
You save 8%
Ball joint 722 mm, Ø 19,95 mm, 22 mm, taper 17 - 20 mm
A: 722 mm. C: Ø19,95 mm. D: 22 mm. E: 17 mm. F: 20 mm. Taper: 17 - 20 mm. More
A: 722 mm. C: Ø19,95 mm. D: 22 mm. E: 17 mm. F: 20 mm. Taper: 17 - 20...
€80,37 €66,42 €73,94 €61,11
You save 8%
LUK Pilot bearing without groove 20 x 47 x 14 mm
LUK
Dimensions: 20 x 47 x 14 mm. Reference no.: 410002641. More
Dimensions: 20 x 47 x 14 mm. Reference no.: 410002641.
€31,41 €25,96
Showing 97 - 144 of 299

Case IH 740 parts, also listed as IHC 740

Plenty of these tractors still wear an IHC 740 badge, and the type plate may well say the same. The more than 250 parts on this page fit the Case IH 740 whichever name is on the bonnet. They are new parts from GRANIT, HELLA, Scharmüller, LUK and FEBI.

Steering, clutch and driveline

The steering side covers ball joints and steering valves. A steering valve that leaks internally lets the wheel creep back and makes loader work heavy going. When fitting a new valve, flush the lines and refill with fresh oil so dirt from the old oil does not go straight into the new unit. Further back you will find clutch plates, double clutch pressure plates and universal joints for the drive shafts.

Grease universal joints until fresh grease appears at all four bearing seals. If one side stays dry, the passage is blocked and that needle bearing is running without lubrication, which is the usual reason a joint fails early.

Engine sealing and cooling

For the engine there are gaskets, O-rings for the feed pump, sealing rings and a crankshaft seal set. Cooling is covered by radiator hoses and a thermostat gasket. Replace a hose that feels soft or crunchy when you squeeze it, even if it is not leaking yet, and fit new clamps at the same time because old ones are often stretched. At the thermostat housing, scrape off every trace of the old gasket with a flat scraper, or the new one will weep as well.

Switches, lights and towing

Rocker switches and indicator lenses, partly from HELLA, cover the electrics. Gas struts for the windscreen frame make the screen stay open again, and drawbars from Scharmüller and GRANIT handle the towing side. A rocker switch that only works now and then usually has burnt contacts, so replace it before it lets you down at the wrong moment.

Checking the fit and related models

Read the type plate first and note whether it says Case IH or IHC 740. For steering valves and clutch plates, which look very similar, the reference number on the part you removed is the safest check. Write it down before you clean the part, because stamped figures soon vanish under rust and paint. Compare it with the numbers shown with the item before you order.

Related models from the same family have their own pages with the parts that fit them:

To browse the whole brand, go to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart