Menu
EUR

Case IH 845 tractor parts & technical data

Need parts for a Case IH 845, also known as the IHC 845? Find more than 250 here, including lighting, classic tractor parts, brakes and transmission parts.

303 parts found for Case IH 845
Show:
SACHS Clutch plate 295, 23,4 x 28,9 mm, 10 splines sintered Case IH
SACHS
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€603,49 €498,75 €555,21 €458,85
You save 8%
LUK Clutch plate 295TSFA 1 1/8 inch, 10 splines, Case IH 523 - 845
LUK
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Organic clutch lining More
Dimensions (inches): 1 1/8"" 10 grooves | Material specifications: Org...
€393,24 €324,99 €361,78 €298,99
You save 8%
Clutch plate 295 sintered, 23,4 x 28,9 mm, 10 splines Case IH
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Sin...
€350,13 €289,36 €322,12 €266,21
You save 8%
Double clutch DuT 295 sintered, 41 x 45, 22 splines Case IH
Contents: 445K88048143AT | Dimensions (mm): 41 x 45 22 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Ger... More
Contents: 445K88048143AT | Dimensions (mm): 41 x 45 22 grooves | Mater...
€646,78 €534,53 €595,04 €491,77
You save 8%
Thrust bearing 65 x 102 x 26 mm Case IH, Fendt, Porsche, Same, Schlüter
Dimensions (mm): 65 x 102 x 26 More
Dimensions (mm): 65 x 102 x 26
€39,53 €32,67 €36,37 €30,06
You save 8%
Oil seal clutch 70 x 90 x 13 mm IHC 523 - 1056
Dimensions (mm): 70 x 90 x 13 More
Dimensions (mm): 70 x 90 x 13
€32,51 €26,87
Shaft seal clutch 30 x 37 x 4 mm Case IH 523 - 1056
Dimensions (mm): 30 x 37 x 4 More
Dimensions (mm): 30 x 37 x 4
€37,64 €31,11
FEBI Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
You save 55%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
MAHLE Gear reduction starter 12 V, 3,2 kW, 9 teeth, 196 mm, clockwise
€507,79 €419,66 €304,13 €251,35
You save 40%
Hydraulic steering Case IH 644-845
€1.789,58 €1.478,99 €1.646,41 €1.360,67
You save 8%
Flywheel 129 teeth Case IH 553-1246
Number of teeth: 129. More
Number of teeth: 129.
€791,67 €654,27 €778,34 €643,26
You save 2%
Thermostat Ø 54 mm, 82 °C Case IH
Ø: 54 mm. Temperature: 82 °C. More
Ø: 54 mm. Temperature: 82 °C.
€27,28 €22,54
Gasket set lower Case IH 474-884, Series 32-4240, Hydro 84
Additional information: Without cylinder liner gasket set. Menke no.: 59577. More
Additional information: Without cylinder liner gasket set. Menke no.: ...
€64,36 €53,19 €59,21 €48,93
You save 8%
Lift rod 580 - 780 mm, Ø 28 - 40 mm, yoke 33 mm, M40 x 3 Case IH
Ø: 28 - 40 mm. Length min./max.: 580 - 780 mm. Fork inner width: 33 mm. More
Ø: 28 - 40 mm. Length min./max.: 580 - 780 mm. Fork inner width: 33 m...
€112,45 €92,93 €103,45 €85,50
You save 8%
Radiator grille lower Case IH 743-1056 XL
Installation location: unten. More
Installation location: unten.
€466,67 €385,68 €429,34 €354,82
You save 8%
Cobo Indicator/position light 84 x 84 x 51 mm, P21W, C5W left / right
Cobo
Bulb: 12V21WK / P21W, 12V5WS / C5W. Colour: Yellow, white. Connection: Blade terminal connection. Width: 84 mm. Form: Square. Height: 84 mm. Dimension... More
Bulb: 12V21WK / P21W, 12V5WS / C5W. Colour: Yellow, white. Connection:...
€34,28 €28,33 €31,54 €26,06
You save 8%
Clutch plate 295 MCC lining, 23,4 x 28,9 mm, 10 splines Case IH
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: MCC clutch lining | Additional information: Made in Germany More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: MCC...
€785,11 €648,85 €722,30 €596,94
You save 8%
LUK Thrust bearing 65 x 102 x 26 mm Case IH 523 - 1455 XL
LUK
Dimensions (mm): 65 x 102 x 26 More
Dimensions (mm): 65 x 102 x 26
€100,44 €83,01 €92,40 €76,37
You save 8%
LUK Double clutch 280/300TGU6 41 x 45 mm, 22 splines, sintered Case IH
LUK
Material specifications: Sintered clutch lining | Dimensions (mm): 41 x 45 22 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 41 ...
€945,40 €781,32 €869,77 €718,82
You save 8%
Clutch plate 295 organic, 23,4 x 28,9 mm, 10 splines Case IH
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 23.4 x 28.9 10 grooves | Material specifications: Org...
€311,56 €257,49 €286,64 €236,89
You save 8%
Blue Print Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
You save 55%
Gear reduction starter 12 V, 3,2 kW, 9 teeth, Ø 89,0 mm, clockwise
€342,87 €283,36 €315,44 €260,69
You save 8%
HELLA Starter motor 12 V, 3,1 kW, 9 teeth, flange 89 mm, clockwise
€594,37 €491,21 €457,95 €378,47
You save 23%
Axial joint 180 mm, M20 x 1,5, M22 x 1,5, 30°, Ø 35 mm
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø E: 35 mm. More
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. F: 30 °. Ø B: 52 mm. Ø...
€69,51 €57,45 €63,95 €52,85
You save 8%
Ball joint 726 mm, Ø 22 mm, 26 mm, taper 22,2 - 22,2 mm
A: 726 mm. C: Ø 22 mm. D: 26 mm. E: 22,2 mm. F: 22,2 mm. Taper: 22,2 - 22,2 mm. More
A: 726 mm. C: Ø 22 mm. D: 26 mm. E: 22,2 mm. F: 22,2 mm. Taper: 22,2 ...
€120,82 €99,85 €111,15 €91,86
You save 8%
Side plate gasket engine block Case IH
€35,47 €29,31 €32,63 €26,97
You save 8%
Stabilizer strut 390 - 640 mm, 25 x 3 mm, 19 mm Case IH
d: 19 mm. h: 45 mm. D: 25 x 3 mm. L: 390 - 640 mm. Dimensions: Length = 390-640 mm. Installation location: links und rechts. More
d: 19 mm. h: 45 mm. D: 25 x 3 mm. L: 390 - 640 mm. Dimensions: Length ...
€288,51 €238,44 €265,43 €219,36
You save 8%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, with indicator light monitoring for commercial vehicles or tractors wi... More
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with...
€50,77 €41,96 €46,71 €38,60
You save 8%
HELLA Lens indicator/position light P21W/C5W, with screws - 2 pieces
HELLA
Version: With bolts | Light function: with position light, with turn signal light | Test mark: E1 42712, ECE | Bulb: P21W, C5W | Installation location... More
Version: With bolts | Light function: with position light, with turn s...
€33,15 €27,40
Elring Cylinder head gasket set with valve stem seal engine D-206, D-239, D-268
Elring
Additional information: With valve stem seal More
Additional information: With valve stem seal
€202,15 €167,07 €185,98 €153,70
You save 8%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
FEBI Mirror 250 x 155 mm, unheated, rod Ø 10, 15, 18 mm
FEBI
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, 4210, 4220, 4230, 4240, 440, 540, 640, 740, 743, 644, 744, 745 S, 840, 844, 844 ... More
Tractor type: Case IH 433, 533, 633, 733, 833, 933, 3210, 3220, 3230, ...
€69,49 €57,43 €59,66 €49,31
You save 14%
Ball joint 255 mm, taper 20 - 22,2 mm, M18 x 1,5, M22 x 1,5
A: 255 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22,2 mm. Taper: 20 - 22,2 mm. More
A: 255 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22,2 mm. Tap...
€83,90 €69,34 €77,19 €63,79
You save 8%
Connection cable MS with LED light, 2,5 m
Length: 2.5 m. Version: The connection cable with LED light makes it much easier to connect the cable to the vehicle in the dark. The LED lights up wh... More
Length: 2.5 m. Version: The connection cable with LED light makes it m...
€100,09 €82,72 €92,08 €76,10
You save 8%
Gasket water channel Case IH Series 85-1455 XL, D 440
€41,25 €34,09 €37,95 €31,36
You save 8%
Air receiver gasket Case IH
Gasket front cover engine D-206, D-358, DT-358, DT-402 Case IH
€86,58 €71,55 €79,65 €65,83
You save 8%
O-ring oil pump Case IH
Bush for nozzle holder brass, injection nozzle Ø 10 mm Case IH
€48,95 €40,45 €45,03 €37,22
You save 8%
Showing 49 - 96 of 303

Case IH 845 parts for the IHC 845

Plenty of people still call it the IHC 845, while newer paperwork says Case IH 845. It is the same tractor, and the more than 250 parts on this page apply under either name. They are new replacement parts from makers such as GRANIT, LUK, FEBI, HELLA and GRAMMER. A tractor that has put in this many hours needs three things looked after: whatever seals, whatever turns and whatever couples.

Clutch and driveline

If the clutch slips under load, or you hear a whine as soon as you press the pedal, it is time to split the tractor. For that job there are clutch plates with organic lining and release bearings, with LUK among the makers. You will also find bearings for the axles and sealing rings for the lower link shaft, where oil creeps out along the shaft once the ring has worn.

Tip: with the tractor already split, always renew the release bearing together with the clutch plate, even if the old bearing still seems quiet. The bearing is a small part compared with the work of splitting the tractor a second time. While you are there, look at the crankshaft seal on the flywheel side. If the old plate is oily, a new one will soon slip as well.

Engine and cooling

Around the engine there are gaskets, for example the one under the thermostat housing, and water pumps for when the pump weeps from its tell tale hole or the shaft develops play. O-rings for the feed pump keep air out of the fuel, and crankshaft seals stop oil loss at the front and rear of the block. A cracked exhaust manifold can be replaced, as can the stop cable you use to shut the engine down. Always fit a new manifold with new gaskets and tighten the nuts from the centre outwards so it does not distort.

Steering and small parts

Play in the steering often comes from worn ball joints. These come in several lengths and thread sizes, so hold the old one against the new one or measure it before you order. There are also gas struts, control knobs and HELLA number plate lights. Small things, but a missing knob or an unlit number plate is noticed straight away at a roadside check.

The right part and related models

The type plate gives you the model and serial number of the tractor. The serial number helps with parts that changed during production. The reference number on the part itself, for example on a water pump or a clutch plate, is the surest guide. Compare it with the details shown for the item.

If you run an 845 XL, it has its own page: Case IH 845 XL. Related Case IH tractors each have their own overview with their own parts too, such as the Case IH 553, Case IH 624, Case IH 654 and Case IH 824. Every model of the make is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart