Menu
EUR

Case IH 845 tractor parts & technical data

Need parts for a Case IH 845, also known as the IHC 845? Find more than 250 here, including lighting, classic tractor parts, brakes and transmission parts.

303 parts found for Case IH 845
Show:
Bosch/Rexroth Hydraulic pump 8 cm³/rpm., taper 1:5, Ø 17 x 17 mm, anticlockwise
Bosch/Rexroth
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction of rotation: Anticlockwise. Line connection suction side: Ø 40mm, 4-Loch, M6. ... More
Output volume: 8 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Direction...
€313,17 €258,82 €288,12 €238,11
You save 8%
Disc to the flexible rod 25,5 x 42 x 1 mm Case IH 644-856 XL
Dimensions: 25.5 x 42 x 1 mm. More
Dimensions: 25.5 x 42 x 1 mm.
€4,91 €4,06
Pin 16 x 60 mm Case IH 433-1246, D 440
Dimensions: 16 x 60 mm. More
Dimensions: 16 x 60 mm.
€27,94 €23,09
Bush lift arm 35,5 x 40,3 x 30 mm Case IH 644-1246
Dimensions: 35.5 x 40.3 x 30 mm. More
Dimensions: 35.5 x 40.3 x 30 mm.
€50,91 €42,08
HELLA Symbol hazard lights red
HELLA
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Warndreieck. More
Version: Red, hazard warning light. Colour: rot. To fit: HELLA Schalte...
€3,00 €2,48
Push button switch hazard lights 12 / 24 V red, with lock
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6.3 x 0.8 (L- R- 30- 30b- 49a- 15- 49), dustproof and splashproof, With glass soc... More
Version: 12/24 V, Red button, with lock, Ø 30 mm, 7 blade terminals 6...
€57,83 €47,79 €53,20 €43,97
You save 8%
Relays step relay main headlights 12 V / 150 W, 5-pin, with holder
Version: 12 V / 150 W, For headlights, for switching between full and dipped beam, With bracket, 5-pin, blade terminals. Width: 31,9 mm. Height: 30,5 ... More
Version: 12 V / 150 W, For headlights, for switching between full and ...
€92,85 €76,74 €85,42 €70,60
You save 8%
Flasher unit 12 V, 2+1+1 x 21 W, with holder and indicator instruments
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 444, 474, 475, 484, 584, 674, 684, 784, 884 385, 485, 485XL, 585, 585XL, 685, 685... More
To fit as: Case IH 238, 248, 258, 268, 278, 288, 323, 354, 374, 384, 4...
€48,67 €40,22 €44,78 €37,01
You save 8%
HELLA Glass rear right IHC, Eicher, John Deere, Schlüter, Volvo
HELLA
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 743, 744, 745 S, 785 XL, 844, 844 S, 845, 885 XL, 946, 955 XL, 1055 XL, 1046, 1246... More
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 74...
€26,28 €21,71
Double hydraulic pump 8 + 8 cm³/rpm., taper 1:5 Case IH
€471,97 €390,06 €434,21 €358,85
You save 8%
Thermostat Ø 54 mm, 82 °C Case IH 268-2500, E 353-1455 XL
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 533, 553, 633, 733, 833, 840, 940, 644, 743, 744, 745, 845, 844, 844S, 946, 1046,... More
To fit as: Case IH 353, 383, 423, 453, 523, 624, 724, 824, 654, 433, 5...
€27,28 €22,54
Track rod 1220 mm, M24 x 1,5, taper 18 - 20 mm, Ø 30 mm
A: 1200 - 1250 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 30 mm. F: 22,6 mm. More
A: 1200 - 1250 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 30 mm. F: 2...
€349,81 €289,10 €321,83 €265,97
You save 8%
Reservoir mineral oil, 0,13 l, Ø 68 mm, height 90 mm, M22 x 1,5
Nominal volume: 0,13 l. Fig.: B. D: 68 mm. H: 90 mm. h: 80 mm. Medium: Mineral oil. Connection thread: M22x1,5. Height: 90 mm. More
Nominal volume: 0,13 l. Fig.: B. D: 68 mm. H: 90 mm. h: 80 mm. Medium:...
€77,34 €63,92 €71,15 €58,80
You save 8%
Centring bolt foot brake Case IH 644-856 XL
€110,75 €91,53 €101,89 €84,21
You save 8%
Pipework water pump Case IH 440-940, E 353-1455 XL
€601,92 €497,45 €553,77 €457,66
You save 8%
VICTOR REINZ Gasket set complete engine D-206 - D-268 Case IH
€420,84 €347,80 €387,17 €319,98
You save 8%
Button thread M5 Case IH 784-884, Series 32-4240, D 440
€35,10 €29,01 €32,29 €26,69
You save 8%
Nozzle cap Case IH
€70,08 €57,92 €64,47 €53,28
You save 8%
Radiator hose by-pass inner-Ø 38 mm Case IH 433-1455 XL
€12,01 €9,93
Radiator hose, bottom inner-Ø 48 mm, length 112 mm Case IH
Inner Ø: 48 mm. Length: 112 mm. More
Inner Ø: 48 mm. Length: 112 mm.
€8,88 €7,33
Stop cable A 1550 mm, B 1370 mm Case IH 644-845
A: 1550 mm. B: 1370 mm. More
A: 1550 mm. B: 1370 mm.
€84,98 €70,23 €78,18 €64,61
You save 8%
Connecting rod bearing standard, width 32 mm Case IH
Dimensions: Width 32 mm. More
Dimensions: Width 32 mm.
€29,81 €24,64
Valve scraper set Ø 13,1 x 9,3 mm, thickness 12 mm Case IH
Outer Ø: 13,1 mm. Inner Ø: 9,3 mm. Material: ACM (polyacrylic rubber). Thickness: 12 mm. More
Outer Ø: 13,1 mm. Inner Ø: 9,3 mm. Material: ACM (polyacrylic rubber...
€7,93 €6,55
Silencer vertical 1330 mm, inner Ø 60 mm, exhaust Ø 45 mm
Version: Length: 1330 mm, Inner Ø: 60 mm, Outlet Ø: 45 mm. Menke no.: 59847. More
Version: Length: 1330 mm, Inner Ø: 60 mm, Outlet Ø: 45 mm. Menke no....
€129,21 €106,79 €118,87 €98,24
You save 8%
GRAMMER Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 400 mm. Fore/aft isolator: Optional.... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.185,81 €980,01
Ring flexible rod 25 x 54 x 13 mm Case IH 644-856 XL
Dimensions: 25 x 54 x 13 mm. Outer Ø: 54 mm. Description: für Biegestab. Height: 13 mm. Inner Ø: 25 mm. More
Dimensions: 25 x 54 x 13 mm. Outer Ø: 54 mm. Description: für Bieges...
€87,79 €72,55 €80,77 €66,75
You save 8%
Yoke 170 mm, pin-Ø 28 mm, mounting size 82 mm Case IH
Dimensions: Length = 170, Bolt Ø = 28, Installation dimension = 82 mm. More
Dimensions: Length = 170, Bolt Ø = 28, Installation dimension = 82 mm
€99,24 €82,02 €91,30 €75,46
You save 8%
Gasket lift housing lower 330 x 880 mm Case IH B-family, C-family
Dimensions: 330 x 880 mm. More
Dimensions: 330 x 880 mm.
€36,78 €30,39
Spindle right 510 mm Case IH 644-1246
Dimensions: Length: 510 mm. More
Dimensions: Length: 510 mm.
€341,73 €282,42 €314,39 €259,83
You save 8%
METARO Radiator grille top 605 x 235 mm
METARO
To fit as: McCormick / IHC / Case IH / International 554, 644, 743, 743XL, 744, 745S, 745XL, 844, 844S, 844XL, 845, 845XL, 856, 856XL, 946, 956, ... More
To fit as: McCormick / IHC / Case IH / International 554, 644, 743,...
€157,24 €129,95 €119,99 €99,17
You save 24%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€37,38 €30,89
HELLA Rear light left / right with number plate light
HELLA
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 743, 744, 745 S, 785 XL, 844, 844 S, 845, 885 XL, 946, 955 XL, 1055 XL, 1046, 1246... More
To fit as: Case IH 248, 385, 484, 485, 485 XL, 585 XL, 644, 685 XL, 74...
€43,49 €35,94
GRAMMER Tractor seat air suspended Compacto COMFORT S fabric, seat width 400 mm
GRAMMER
Comfort seat with air suspension and 12V compressor. Height adjustment 60 mm continuous. Weight adjustment 50 - 130 kg. Longitudinal adjustment 180 mm... More
Comfort seat with air suspension and 12V compressor. Height adjustment...
€1.170,05 €966,98
MAHLE Starter motor 12 V, 2,7 kW, 9 teeth clockwise, Ø 89 mm
€495,75 €409,71 €296,92 €245,39
You save 40%
Bearing wheel hub 95 x 135 x 20 mm Carraro front axle 406519 Case IH
Center bearing drive shaft 32 x 62 x 37 mm Case IH
€91,54 €75,65 €84,22 €69,60
You save 8%
Ball joint taper 18,2 - 20,4 mm, M16 x 1,5, M24 x 1,5, 106 mm
A: 106 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18,2 mm. F: 20,4 mm. Taper: 18,2 - 20,4 mm. More
A: 106 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18,2 mm. F: 20,4 mm. T...
€77,96 €64,43 €71,72 €59,28
You save 8%
Axial joint 190 mm, M20 x 1,5, M22 x 1,5, Ø 56 mm, Ø 40 mm
A: 190 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm. More
A: 190 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. Ø B: 56 mm. Ø E: 40 mm.
€76,93 €63,58 €70,78 €58,49
You save 8%
Ball joint 92 mm, M12 x 1,5, M20 x 1,5, taper 14,4 - 16,3 mm
A: 92 mm. C: M12 x 1,5 mm. D: M20 x 1,5 mm. E: 14,4 mm. F: 16,3 mm. Taper: 14,4 - 16,3 mm. More
A: 92 mm. C: M12 x 1,5 mm. D: M20 x 1,5 mm. E: 14,4 mm. F: 16,3 mm. Ta...
€38,46 €31,79
Ball joint 95 mm, M16 x 1,5, M24 x 1,5, taper 18 - 20,2 mm
A: 95 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 95 mm. C: M16 x 1,5 mm. D: M24 x 1,5 mm. E: 18 mm. F: 20,2 mm. Tape...
€52,83 €43,66 €48,60 €40,17
You save 8%
LUK Pilot bearing without groove 20 x 47 x 14 mm
LUK
Dimensions: 20 x 47 x 14 mm. Reference no.: 410002641. More
Dimensions: 20 x 47 x 14 mm. Reference no.: 410002641.
€31,41 €25,96
Connection cable 2,5 m
Length: 2.5 m. Reference no.: 1762625. More
Length: 2.5 m. Reference no.: 1762625.
€83,20 €68,76 €76,54 €63,26
You save 8%
KS Piston ring set 3 rings Ø 98,43 mm, 3,16 mm / 2,39 mm / 4,75 mm Case IH
KS
Dimensions: 3 rings, Ø 98.43 mm, 3.16 mm (trapezoidal ring) / 2.39 mm / 4.75 mm. More
Dimensions: 3 rings, Ø 98.43 mm, 3.16 mm (trapezoidal ring) / 2.39 mm...
€61,30 €50,66 €56,40 €46,61
You save 8%
Showing 97 - 144 of 303

Case IH 845 parts for the IHC 845

Plenty of people still call it the IHC 845, while newer paperwork says Case IH 845. It is the same tractor, and the more than 250 parts on this page apply under either name. They are new replacement parts from makers such as GRANIT, LUK, FEBI, HELLA and GRAMMER. A tractor that has put in this many hours needs three things looked after: whatever seals, whatever turns and whatever couples.

Clutch and driveline

If the clutch slips under load, or you hear a whine as soon as you press the pedal, it is time to split the tractor. For that job there are clutch plates with organic lining and release bearings, with LUK among the makers. You will also find bearings for the axles and sealing rings for the lower link shaft, where oil creeps out along the shaft once the ring has worn.

Tip: with the tractor already split, always renew the release bearing together with the clutch plate, even if the old bearing still seems quiet. The bearing is a small part compared with the work of splitting the tractor a second time. While you are there, look at the crankshaft seal on the flywheel side. If the old plate is oily, a new one will soon slip as well.

Engine and cooling

Around the engine there are gaskets, for example the one under the thermostat housing, and water pumps for when the pump weeps from its tell tale hole or the shaft develops play. O-rings for the feed pump keep air out of the fuel, and crankshaft seals stop oil loss at the front and rear of the block. A cracked exhaust manifold can be replaced, as can the stop cable you use to shut the engine down. Always fit a new manifold with new gaskets and tighten the nuts from the centre outwards so it does not distort.

Steering and small parts

Play in the steering often comes from worn ball joints. These come in several lengths and thread sizes, so hold the old one against the new one or measure it before you order. There are also gas struts, control knobs and HELLA number plate lights. Small things, but a missing knob or an unlit number plate is noticed straight away at a roadside check.

The right part and related models

The type plate gives you the model and serial number of the tractor. The serial number helps with parts that changed during production. The reference number on the part itself, for example on a water pump or a clutch plate, is the surest guide. Compare it with the details shown for the item.

If you run an 845 XL, it has its own page: Case IH 845 XL. Related Case IH tractors each have their own overview with their own parts too, such as the Case IH 553, Case IH 624, Case IH 654 and Case IH 824. Every model of the make is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart