Menu
EUR

Case IH CS 120 tractor parts & technical data

The Case IH CS 120 page covers more than 400 parts for this CS series tractor, sorted by group and including lighting, trailer couplings and electrics.

438 parts found for Case IH CS 120
Show:
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€3.081,10 €2.546,36
 
GRANIT Vibration damper radiator Case IH, Steyr
GRANIT
Vibration damper radiator Case IH, Steyr
€12,85 €10,62
 
GRANIT Stop solenoid switch Case IH, Steyr
5%
GRANIT
Stop solenoid switch Case IH, Steyr
€493,46 €407,82 €468,75 €387,40
 
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
 
Valve cover gasket engine Sisu 320D
Valve cover gasket engine Sisu 320D
€23,40 €19,34
 
GRANIT Bolt set 1ste steering valve 3x M8 x 90
GRANIT
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90.
€17,60 €14,55
 
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
5%
GRAMMER
Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: ...
€6.800,20 €5.620,00 €6.460,15 €5.338,97
 
Gas strut hood 500 N, 585 mm Case IH, Steyr
5%
Gas strut hood 500 N, 585 mm Case IH, Steyr
Newtons: 500. A: 585 mm. B: 290 mm. C: 8 mm. D: 8 mm. To fit: bonnet. Form: 2.
€59,87 €49,48 €56,85 €46,98
 
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
23%
ROCKINGER
Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.498,36 €1.238,31 €1.147,30 €948,18
 
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
12%
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
 
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
16%
Scharmüller
Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 ...
€1.108,13 €915,81 €933,36 €771,37
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.621,20 €1.339,83
 
Scharmüller Adapter plate 325 mm, hole pattern 140 x 80 mm, pin Ø 25 mm, M16
12%
Scharmüller
Adapter plate 325 mm, hole pattern 140 x 80 mm, pin Ø 25 mm, M16
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 325 mm. Hole pattern: 140 ...
€621,94 €514,00 €550,00 €454,55
 
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
 
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
HELLA
Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installa...
€78,40 €64,79
 
HELLA Rear light right hole spacing 110 mm, 12 V
23%
HELLA
Rear light right hole spacing 110 mm, 12 V
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 ...
€95,00 €78,51 €72,75 €60,12
 
Indicator/position light right P21W, R5W, yellow/white, rectangular
5%
Indicator/position light right P21W, R5W, yellow/white, rectangular
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Form: Rectangular. In...
€59,74 €49,37 €56,75 €46,90
 
HELLA Corner work light H3 flood beam, 55 W, 12 V, 103 x 103 x 66 mm
24%
HELLA
Corner work light H3 flood beam, 55 W, 12 V, 103 x 103 x 66 mm
Bulb: H3. Colour: Transparent. Connection: AMP plug. Width: 80 mm. Form: Square....
€87,60 €72,40 €67,00 €55,37
 
GRANIT Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
10%
GRANIT
Timing relay 40 sec. delay, 5-pin, 6,3 mm blade connection
Version: Delay: 40 sec., Without bracket, 5-pin, blade terminal 6.3 mm.
€230,76 €190,71 €208,75 €172,52
 
Alternator 14 V / 95 A, form B, flange 50,8 mm
10%
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr
€520,04 €429,79 €470,50 €388,84
 
Disc sensor front axle 145109
Disc sensor front axle 145109
€16,00 €13,22
 
Showing 145 - 168 of 438

Case IH CS 120 parts: electrics, seals and more

A battery that will not charge, a dead work lamp or a dash switch that only works when you press it twice: on the Case IH CS 120, those are typical jobs. This page lists more than 400 parts that fit the tractor, from GRANIT, Scharmüller, HELLA, ROCKINGER and Carraro among others.

Charging and lighting

For the charging circuit there are alternators in several versions, along with V-belts to drive them. The cab takes work lamps such as a HELLA corner light with flood beam. Push button and rocker switches on the dash develop poor contacts over the years, and you can replace them individually.

Tip: when you fit a new alternator, fit a new V-belt too and set the tension correctly. A glazed old belt slips on the new pulley, the alternator undercharges, and you end up hunting for a fault in the wrong place. Check the earth cable while you are at it.

Before replacing a switch, look at the plug behind it. Moisture and corrosion on the contacts cause the same symptoms as a failed switch. A little contact spray and a firmly seated plug sometimes solve it, and only if that fails does a new rocker switch go in.

Seals, gaskets and bushes

Leaks at the feed pump are dealt with using the seals and O-rings made for that spot. There is a gasket for the water pump and sealing rings in various sizes. The linkage uses bushes for the lower link shaft, which develop play after many hours.

Cab, seat and hitch

If the bonnet will not stay up, a new gas strut for the hood sorts it. Tractor seats include the air suspended Maximo Professional, and PROBOSS seats are available too. At the back of the CS 120 there are automatic drawbars and adapter plates to mount a coupling.

Ordering the right part

The type plate tells you exactly which model you have. After that, the number on the old part is your best guide, as alternators, switches and gaskets often carry a reference number. With an alternator, also compare the flange and mounting with the unit you are taking off.

The CS range has several other models, each with its own page. Smaller than the CS 120 are the Case IH CS 75 and the Case IH CS 78, followed by the CS 94 and the CS 110. Always order through the page for your own type. For everything else from the brand, go to Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart