Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
16%
Scharmüller
Drawbar K80 manual, rail 325 mm, pin Ø 25 mm, 2000 kg, black
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Load capacity: 2000...
€1.364,41 €1.127,61 €1.149,20 €949,75
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
Rear light, brake light, indicator 95 x 85 x 55 mm, 12 V, right
10%
Rear light, brake light, indicator 95 x 85 x 55 mm, 12 V, right
Bulb: 12V10WK / R10W, 12V21WK / P21W. Connection: Internal blade terminals. Widt...
€55,43 €45,81 €50,15 €41,45
 
GRANIT Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
5%
GRANIT
Alternator 14 V / 35 A, flange 56 mm, pulley Ø 68 mm, W-connection
Additional information: with W connection | Mounting L / d / R (mm): 56,0 / 8,3 ...
€117,04 €96,73 €111,15 €91,86
 
GRANIT Aircon compressor 12 V, pulley-Ø 135 mm, 2 grooves
5%
GRANIT
Aircon compressor 12 V, pulley-Ø 135 mm, 2 grooves
Pulley Ø (mm): 135 | Oil quantity (ccm): 180 | Fixing: EM | Suitable oil: PAG 46...
€626,99 €518,17 €595,60 €492,23
 
Contact switch brake light, 4 WD, start safety switch
Contact switch brake light, 4 WD, start safety switch
Version: For brake light, four-wheel drive (4 WD), start safety switch
€43,45 €35,91
 
GRANIT Rocker switch dashboard engine speed, differential for
5%
GRANIT
Rocker switch dashboard engine speed, differential for
Version: Dashboard Control panel Instrument panel Cab roof Engine speed reductio...
€49,26 €40,71 €46,75 €38,64
 
SACHS Thrust bearing 106 x 140 x 25 mm
5%
SACHS
Thrust bearing 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€196,98 €162,79 €187,10 €154,63
 
SACHS Thrust bearing 65 x 96 x 23 mm
5%
SACHS
Thrust bearing 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€134,70 €111,32 €127,95 €105,74
 
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
5%
LUK
Thrust bearing PTO clutch 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€216,71 €179,10 €205,85 €170,12
 
Double clutch DuT 280, 45 x 50, 24 splines, chain pitch 83 mm
5%
Double clutch DuT 280, 45 x 50, 24 splines, chain pitch 83 mm
Flywheel dimension (mm): 2 (erhöht) | Additional information: Made in Germany | ...
€632,81 €522,98 €601,15 €496,82
 
Double clutch DuT 295 45 x 50 mm, 24 splines
5%
Double clutch DuT 295 45 x 50 mm, 24 splines
Additional information: Made in Germany | Dimensions (mm): 45 x 50, 24 grooves |...
€937,75 €775,00 €890,85 €736,24
 
GRANIT Thrust bearing driving clutch closed version 65 x 97 x 23 mm
5%
GRANIT
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23
€79,10 €65,37 €75,10 €62,07
 
Thrust bearing closed version 106 x 140 x 25 mm
5%
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25
€129,08 €106,68 €122,60 €101,32
 
MAHLE Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
6%
MAHLE
Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mounting L / d...
€520,71 €430,34 €488,15 €403,43
 
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
5%
Alternator 14 V / 120 A, flange 56 mm, Case IH, John Deere, Steyr
Installation angle (°): 0 | Pulley Ø (mm): - | Mounting L / d / R (mm): 56,0 / 8...
€201,03 €166,14 €190,95 €157,81
 
DANA Spicer Plug front axle 745
DANA Spicer
Plug front axle 745
€19,40 €16,03
 
FEBI Air filter C15165/3, AF4135
55%
FEBI
Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
 
FEBI Fuel filter WK842
57%
FEBI
Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
 
GRANIT Pin upper arm Carraro front axle 145706
5%
GRANIT
Pin upper arm Carraro front axle 145706
€90,51 €74,80 €85,95 €71,03
 
GRANIT Pin upper arm Carraro front axle 145706
5%
GRANIT
Pin upper arm Carraro front axle 145706
€130,68 €108,00 €124,10 €102,56
 
Showing 217 - 240 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart