Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
GRANIT Tank cap with ventilation, tank collar Ø 80 mm
GRANIT
Filler neck Ø: 80 mm. More
Filler neck Ø: 80 mm.
€18,65 €15,41
Bosch/Rexroth Double pump anticlockwise 14 + 4 cm³/rpm. Case IH, Steyr
Bosch/Rexroth
Output volume: 14 + 4 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 280/280 bar. Direction of rotation: Anticlockwise. Max. spe... More
Output volume: 14 + 4 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Oper...
€977,07 €807,50 €928,20 €767,11
You save 5%
GRANIT Handle Case IH C 42, CS 105 Pro, Steyr M 948-M9094
€73,88 €61,06 €70,15 €57,98
You save 5%
Strut for rear screen Case IH, New Holland
€35,27 €29,15 €33,50 €27,69
You save 5%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€32,43 €26,80 €30,80 €25,45
You save 5%
GRANIT Oil pressure switch M10 x 1 conical, 6,3 mm, 12 V, 0,4 - 0,7 bar
GRANIT
Version: Thread: M10 x 1, tapered, Blade terminal 6.3 mm, DIN 158, AF 24, switching pressure: 0.4 - 0.7 bar. Colour: Black. Thread: M10x1. Current: 0,... More
Version: Thread: M10 x 1, tapered, Blade terminal 6.3 mm, DIN 158, AF ...
€15,65 €12,93
GRANIT Work lamp flood beam H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Close-range illumination. Connection: AMP plug. Bulb: 12V... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€49,91 €41,25 €47,40 €39,17
You save 5%
HELLA Rear light 170 x 75 x 64 mm, hole spacing 70 mm, M5, 12 / 24 V
HELLA
Bulb: P21/5W, P21W. Colour: Red/yellow. Connection: Blade terminal. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hole spacing: 70 mm. Material: Le... More
Bulb: P21/5W, P21W. Colour: Red/yellow. Connection: Blade terminal. Wi...
€31,55 €26,07
HELLA Work lamp flood beam H3, 12 / 24 V, square, hanging
HELLA
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. Dimensions W x H x D: 112 x 124 x 167 mm. Installation location: Left/right. Pro... More
Bulb: H3. Form: Rectangular. Material: Housing: plastic, lens: glass. ...
€44,86 €37,07
HELLA Work lamp flood beam H3, 12 / 24 V, 35 / 70 W, square, mounting, bolted
HELLA
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: • Housing: plastic • Diffusing lens: glass. Dimensions W x H x D: 154 x 94 x 11... More
Bulb: H3. Connection: Blade terminal. Form: Rectangular. Material: •...
€54,55 €45,08
GRANIT Relays steering valve windshield wiper, nozzle and interval 6-pin
GRANIT
Version: For wipers, washer and intermittent wipers, 6-pin, compact plug. More
Version: For wipers, washer and intermittent wipers, 6-pin, compact pl...
€165,49 €136,77 €149,70 €123,72
You save 10%
GRANIT Alternator 14 V / 95 A, form B, flange 51,2 mm, pulley-Ø 67,2 mm
GRANIT
To fit as: Steyr 9080 M, 9090 M, 9100 M More
To fit as: Steyr 9080 M, 9090 M, 9100 M
€172,47 €142,54 €163,80 €135,37
You save 5%
O-ring feed pump Ø 38 x 3 mm Deutz engine F3L812D-F6L912W
To fit as: Deutz engine F3, 4, 5, 6L 912, 913W/T, F2L912 bj. 3/84, F3L812D, F3L913, F4L812D, F4L912W, F5L912, F5L912W, F5L912D, F6L812D, F6L912, F6L91... More
To fit as: Deutz engine F3, 4, 5, 6L 912, 913W/T, F2L912 bj. 3/84, F3L...
€7,65 €6,32
DANA Spicer Synchroniser unit, complete upstream group Case IH C 42 - CS 75
€837,93 €692,50 €758,10 €626,53
You save 10%
Expansion valve airco 1/2 inch o-ring, 35 g
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Connection thread E: - More
Weight (g): 35 | Equipment: O-ring | Connection thread A: # 8, 1/2"" O...
€51,81 €42,82 €49,20 €40,66
You save 5%
GRANIT Filter dryer airco 160 mm, #6 3/8, M/flange
GRANIT
Length (mm): 160 | Thread: 6 3/8 | Weight (g): 400 | Connection thread: M/flange More
Length (mm): 160 | Thread: 6 3/8 | Weight (g): 400 | Connection thread...
€50,32 €41,59 €47,80 €39,50
You save 5%
Aircon compressor 12 V, pulley-Ø 152 mm, 2 grooves
Nominal voltage (V): 12 | Fixing: EM | Connection: A2 | Refrigerant: R 134a | Suitable oil: PAG 46 | No. of grooves: 2 | For compressor: 7H15 | Pulley... More
Nominal voltage (V): 12 | Fixing: EM | Connection: A2 | Refrigerant: R...
€457,66 €378,23 €434,75 €359,30
You save 5%
Push button switch lower, extern circuit Case IH, Steyr
Switch button colour: green | Version: Lower control hydraulics External switch (on mudguard) | To operate: Lower control hydraulics More
Switch button colour: green | Version: Lower control hydraulics Extern...
€42,86 €35,42 €40,70 €33,64
You save 5%
Push button switch lift, extern circuit Case IH, Steyr
Version: Raise control hydraulics External switch (on mudguard) More
Version: Raise control hydraulics External switch (on mudguard)
€37,69 €31,15 €35,80 €29,59
You save 5%
Showing 265 - 288 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart