Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
Universal joint axle drive 27 x 71 mm, maintenance-free
€76,71 €63,40 €72,85 €60,21
You save 5%
GRANIT Ball joint M22 x 1,5, M22 x 1,5, taper 24 - 26 mm
GRANIT
A: 110 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 110 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€91,62 €75,72 €87,00 €71,90
You save 5%
Carraro Bearing bush front axle 30 x 34 x 30 mm John Deere, Massey Ferguson, Case IH
Carraro
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm. More
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm.
€9,15 €7,56
LUK Pilot bearing 17 x 40 x 12 mm
LUK
Dimensions: 17 x 40 x 12 mm. Menke no.: 167837. More
Dimensions: 17 x 40 x 12 mm. Menke no.: 167837.
€8,70 €7,19
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€664,77 €549,40 €587,90 €485,87
You save 12%
GRANIT Installation cable mini-contact plug 1 m
GRANIT
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€163,94 €135,49 €155,70 €128,68
You save 5%
KS Piston ring set 3 rings Ø 105 mm, 3 (trapezoidal ring) / 2 / 4 mm TD 226.B
KS
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm. More
Dimensions: 3 rings, Ø 105 mm, 3 mm (trapezoidal ring) / 2 mm / 4 mm.
€127,53 €105,40 €121,15 €100,12
You save 5%
Gasket assembly cover CS 68-150, CVX 120-1190
€34,97 €28,90 €33,20 €27,44
You save 5%
Thermostat Ø 85 mm, 85 °C Case IH, Steyr, Fendt
Ø: 85 mm. Temperature: 85 °C. More
Ø: 85 mm. Temperature: 85 °C.
€128,43 €106,14 €122,00 €100,83
You save 5%
GRANIT V-belt set Case IH CS 68-100
€37,20 €30,74
GRANIT Sealing ring water pump Case IH, Steyr
GRANIT Cylinder head bolt 14 x 158 mm Case IH, Steyr, Fendt
GRANIT
Dimensions: M14 x 158 mm. More
Dimensions: M14 x 158 mm.
€33,82 €27,95 €32,10 €26,53
You save 5%
Exhaust valve guide Case IH, Steyr, Renault, Fendt
€33,11 €27,36 €31,45 €25,99
You save 5%
GRANIT Door lock, right Case IH C 42, CS 105 Pro, Steyr M 948-M9094
€188,76 €156,00 €179,30 €148,18
You save 5%
GRANIT Handle Case IH C 42, CS 105 Pro, Steyr M 948-M9094
€73,88 €61,06 €70,15 €57,98
You save 5%
Showing 289 - 312 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart