Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
Maintenance switch air filter Case IH, New Holland, Steyr
5%
Maintenance switch air filter Case IH, New Holland, Steyr
Version: Function: maintenance switch Connection cable with plug connection
€101,00 €83,47 €95,95 €79,30
 
GRANIT Rocker switch dashboard front work light
5%
GRANIT
Rocker switch dashboard front work light
Version: Dashboard Control panel Front headlights
€93,63 €77,38 €88,90 €73,47
 
Clutch plate 290 28 x 32 mm, 17 splines, sintered, with torsion damping
5%
Clutch plate 290 28 x 32 mm, 17 splines, sintered, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 grooves | ...
€271,81 €224,64 €258,20 €213,39
 
Pilot bearing 17 x 40 x 12 mm
Pilot bearing 17 x 40 x 12 mm
Dimensions (mm): 17 x 40 x 12
€6,40 €5,29
 
Alternator 14 V / 80 A, flange 55,5 mm
5%
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | ...
€226,57 €187,25 €215,20 €177,85
 
HELLA Alternator 14 V / 95 A, pulley Ø 86 mm, 2 grooves, Case IH, Ford
20%
HELLA
Alternator 14 V / 95 A, pulley Ø 86 mm, 2 grooves, Case IH, Ford
Nominal values (V / A): 14 / 95 | No. of grooves: 2 | Charging current (A): 95 |...
€476,33 €393,66 €382,95 €316,49
 
DANA Spicer O-ring differential front axle 745, 2 g
DANA Spicer
O-ring differential front axle 745, 2 g
€2,23 €1,84
 
Radiator hose, oil cooler inner-Ø 40 mm Case IH, Steyr
Radiator hose, oil cooler inner-Ø 40 mm Case IH, Steyr
Inner Ø (mm): 40
€6,00 €4,96
 
Air filter C15165/3, AF4135
55%
Air filter C15165/3, AF4135
€38,32 €31,67 €17,38 €14,36
 
GRANIT Wheel brake cylinder mineral oil Case IH, Steyr
5%
GRANIT
Wheel brake cylinder mineral oil Case IH, Steyr
€314,24 €259,70 €298,50 €246,69
 
VICTOR REINZ Manifold gasket inlet and outlet Case IH, Deutz-Fahr
VICTOR REINZ
Manifold gasket inlet and outlet Case IH, Deutz-Fahr
€9,00 €7,44
 
V-belt Case IH, Steyr, Fendt
V-belt Case IH, Steyr, Fendt
€17,75 €14,67
 
GRANIT Spacer tube water pump Case IH, Steyr
GRANIT
Spacer tube water pump Case IH, Steyr
€32,60 €26,94
 
GRANIT Radiator hose by-pass Ø 22 / 25 mm Case IH C 55-64, CS 68-94
5%
GRANIT
Radiator hose by-pass Ø 22 / 25 mm Case IH C 55-64, CS 68-94
Inner Ø: 22 / 25 mm.
€81,42 €67,29 €77,30 €63,88
 
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm.
€14,60 €12,07
 
Piston ring set 3 rings Ø 108 mm, 2,5 mm / 2,5 mm / 4 mm
5%
Piston ring set 3 rings Ø 108 mm, 2,5 mm / 2,5 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 2.5 mm / 2.5 mm / 4 mm.
€39,58 €32,71 €37,60 €31,07
 
GRANIT Cable clamp Case IH CS 78, 86, 94
GRANIT
Cable clamp Case IH CS 78, 86, 94
€6,30 €5,21
 
Hinge half for- and rear window lens side Case IH, New Holland
5%
Hinge half for- and rear window lens side Case IH, New Holland
€47,26 €39,06 €44,85 €37,07
 
Showing 337 - 360 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart