Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
GRANIT Push button switch linkage lift 12/24 V, Ø 30 mm, green button
5%
GRANIT
Push button switch linkage lift 12/24 V, Ø 30 mm, green button
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, 4 blade ter...
€34,46 €28,48 €32,70 €27,02
 
GRANIT Rocker switch dashboard engine speed, differential for
5%
GRANIT
Rocker switch dashboard engine speed, differential for
Version: Dashboard Control panel Instrument panel Cab roof Engine speed reductio...
€49,26 €40,71 €46,75 €38,64
 
Rocker switch dashboard windshield wiser rear, battery-isolator
5%
Rocker switch dashboard windshield wiser rear, battery-isolator
Version: Dashboard Control panel Wiper/washer system Windscreen Electric drives ...
€59,00 €48,76 €56,00 €46,28
 
GRANIT Rocker switch dashboard work lamp, beacon, rear-view mirror
5%
GRANIT
Rocker switch dashboard work lamp, beacon, rear-view mirror
Version: Dashboard Control panel Headlights Rotating beacon Wiper/washer system ...
€80,27 €66,34 €76,25 €63,02
 
GRANIT Rocker switch dashboard hazard warning light switch
5%
GRANIT
Rocker switch dashboard hazard warning light switch
Version: Dashboard Control panel Hazard warning light switch
€88,18 €72,88 €83,75 €69,21
 
Symbol work lights green Case IH, Steyr
Symbol work lights green Case IH, Steyr
Version: Green, work light
€5,90 €4,88
 
GRANIT Hand brake switch 1 x 6,3 mm, mounting depth 26 mm Case IH
GRANIT
Hand brake switch 1 x 6,3 mm, mounting depth 26 mm Case IH
Connection type: 1 x 6.3 mm | Version: Blade terminal Connection type: 1 x 6.3 m...
€25,45 €21,03
 
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
5%
LUK
Thrust bearing driving clutch 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23
€155,61 €128,60 €147,80 €122,15
 
LUK Thrust bearing PTO shaft 106 x 141 x 21 Case IH CS 75 - CS 100, Fendt
5%
LUK
Thrust bearing PTO shaft 106 x 141 x 21 Case IH CS 75 - CS 100, Fendt
Inner Ø (mm): 106 | Width (mm): 21 | Housing: Without housing | Outer Ø (mm): 14...
€178,34 €147,39 €169,40 €140,00
 
GRANIT Clutch plate 295 28 x 32 mm, 17 splines, organic, with torsion damping
5%
GRANIT
Clutch plate 295 28 x 32 mm, 17 splines, organic, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 grooves | ...
€345,82 €285,80 €328,50 €271,49
 
Clutch kit 6-finger DUT 280 sintered, Ø 290 mm Case IH, Steyr
5%
Clutch kit 6-finger DUT 280 sintered, Ø 290 mm Case IH, Steyr
Contents: Clutch (445K88998101), sintered disc (445S78986801), release bearing (...
€1.010,35 €835,00 €959,80 €793,22
 
MAHLE Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
6%
MAHLE
Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mounting L / d...
€520,71 €430,34 €488,15 €403,43
 
MAHLE Alternator 14 V, 95 A, flange 50,8 mm, form B
38%
MAHLE
Alternator 14 V, 95 A, flange 50,8 mm, form B
Installation angle (°): 0 | Mounting hole Ø / R (mm): 10,2 / 86,0 | Nominal valu...
€434,17 €358,82 €271,35 €224,26
 
MAHLE Alternator 14 V, 65 A, flange 50,8 mm, with fan wheel
38%
MAHLE
Alternator 14 V, 65 A, flange 50,8 mm, with fan wheel
Mounting hole Ø / R (mm): 10,2 / 86,0 | Direction of rotation: ↻ | Belt width (m...
€258,07 €213,28 €161,25 €133,26
 
Alternator 14 V / 120 A, flange 50,8 mm Case IH, John Deere, Steyr
5%
Alternator 14 V / 120 A, flange 50,8 mm Case IH, John Deere, Steyr
Nominal voltage (V): 14 | Additional information: Dust-tight; connections: B+ (M...
€231,79 €191,56 €220,20 €181,98
 
HELLA Alternator 14 V / 95 A, Case IH, Ford, Steyr
20%
HELLA
Alternator 14 V / 95 A, Case IH, Ford, Steyr
Nominal values (V / A): 14 / 95 | Charging current (A): 95 | Nominal voltage (V)...
€529,23 €437,38 €425,50 €351,65
 
GRANIT Push button switch lift without resistance Case IH CS 68 - CS 150
GRANIT
Push button switch lift without resistance Case IH CS 68 - CS 150
Version: without resistor thread M30x1 mounting nut SW 36 plug connection DT-04 ...
€31,70 €26,20
 
Operating lever electric operation devices Case IH, Steyr
5%
Operating lever electric operation devices Case IH, Steyr
Version: For additional electrical control units With connection cable (open end...
€152,22 €125,80 €144,60 €119,50
 
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
38%
MAHLE
Starter motor 12 V, 3,0 kW, 11 teeth, mounting Ø 89 mm, mounting angle r 45
€484,86 €400,71 €303,00 €250,41
 
GRANIT Ball joint M22 x 1,5, M22 x 1,5, taper 24 - 26 mm
5%
GRANIT
Ball joint M22 x 1,5, M22 x 1,5, taper 24 - 26 mm
A: 110 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€91,62 €75,72 €87,00 €71,90
 
Carraro Bearing bush front axle 30 x 34 x 30 mm John Deere, Massey Ferguson, Case IH
Carraro
Bearing bush front axle 30 x 34 x 30 mm John Deere, Massey Ferguson, Case IH
Outer Ø: 34 mm. Inner Ø: 30 mm. Length: 30 mm.
€9,15 €7,56
 
Brake disc Ø 170 mm, inner-Ø 45 mm, 12 teeth
5%
Brake disc Ø 170 mm, inner-Ø 45 mm, 12 teeth
€108,90 €90,00 €103,45 €85,50
 
Showing 289 - 312 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart