Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
HELLA Headlight left / right 12 / 24 V, H4, 182 x 102 x 88 mm, built-in Fendt
HELLA
Headlight left / right 12 / 24 V, H4, 182 x 102 x 88 mm, built-in Fendt
Bulb: 12V60/55W / H4, 24V75/70W / H4. Colour: Surround: black. Width: 182 mm. He...
€64,30 €53,14
 
MAHLE Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
40%
MAHLE
Alternator 14 V / 80 A, flange 56 mm, pulley-Ø 68 mm
Additional information: Dust-tight with W connection | Flange size (mm): 56,0 | ...
€360,82 €298,20 €214,75 €177,48
 
GRANIT Ball joint 140 mm, C M18 x 1,5, D M18 x 1,5, taper 20 - 22 mm
5%
GRANIT
Ball joint 140 mm, C M18 x 1,5, D M18 x 1,5, taper 20 - 22 mm
A: 140 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 ...
€60,23 €49,78 €57,20 €47,27
 
Heating element
5%
Heating element
€181,69 €150,16 €172,60 €142,64
 
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
20%
ROCKINGER
Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
Automatic version
€2.688,62 €2.222,00 €2.161,65 €1.786,49
 
Stabilus Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
5%
Stabilus
Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm): 8 | B (m...
€132,50 €109,50 €125,85 €104,01
 
SANDEN Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
5%
SANDEN
Aircon compressor SD7H15 12 V, pulley Ø 152 mm, 2 grooves
Fixing: EM | Pulley Ø (mm): 152 | Connection: A2 | Suitable oil: SP - 15 | No. o...
€595,38 €492,05 €565,60 €467,44
 
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise
20%
HELLA
Starter motor 12 V, 3,0 kW, 11 teeth, clockwise
€581,59 €480,65 €467,55 €386,41
 
GRANIT Bush 115 x 125 x 42 mm Case IH
5%
GRANIT
Bush 115 x 125 x 42 mm Case IH
€53,93 €44,57 €51,20 €42,31
 
Piston set, complete 3 rings, Ø 105 mm, piston pin Ø 35 x 88 mm
5%
Piston set, complete 3 rings, Ø 105 mm, piston pin Ø 35 x 88 mm
Dimensions: 3 rings, Ø 105 mm, Gudgeon pin Ø 35 x 88 mm, Combustion chamber Ø 60...
€273,47 €226,01 €259,75 €214,67
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
GRANIT Shaft seal hydraulic pump Case IH, Steyr
5%
GRANIT
Shaft seal hydraulic pump Case IH, Steyr
€41,38 €34,20 €39,30 €32,48
 
GRAMMER Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
GRAMMER
Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€2.197,40 €1.816,03
 
Door lock, left Case IH C 42, CS 105 Pro, Steyr M 948-M9094
5%
Door lock, left Case IH C 42, CS 105 Pro, Steyr M 948-M9094
€188,76 €156,00 €179,30 €148,18
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
20%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.441,35 €1.191,20 €1.158,80 €957,69
 
Spiegelarm Case IH C 42, CS 75, Steyr M 948-975
5%
Spiegelarm Case IH C 42, CS 75, Steyr M 948-975
€288,16 €238,15 €273,75 €226,24
 
Water pump with reinforced bearings Fendt, Case IH, Renault, Steyr
5%
Water pump with reinforced bearings Fendt, Case IH, Renault, Steyr
To fit as: Case IH C 55, 64, 70, CS 68, 75 to DBD0023065, CS 78, 86, 94 to DBD00...
€138,21 €114,22 €131,25 €108,47
 
LUK Clutch kit disc-Ø 290 mm Case IH, Steyr
10%
LUK
Clutch kit disc-Ø 290 mm Case IH, Steyr
Disc Ø (mm): 290 | Contents: Pressure plate 458230002810, clutch plate 458329000...
€1.224,22 €1.011,75 €1.107,60 €915,37
 
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
 
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
14%
FEBI
Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
 
Showing 25 - 48 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart