Menu
EUR

Case IH CS 75 tractor parts & technical data

Keep your Case IH CS 75 working with more than 350 matching parts. The range includes trailer couplings, lighting and electrics, all selected for this model.

377 parts found for Case IH CS 75
Show:
Tank cap without ventilation, tank collar Ø 80 mm
5%
Tank cap without ventilation, tank collar Ø 80 mm
Filler neck Ø: 80 mm.
€49,13 €40,60 €46,65 €38,55
 
GRAMMER Tractor seat Maximo Comfort Plus MSG95A/731
GRAMMER
Tractor seat Maximo Comfort Plus MSG95A/731
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: F...
€2.191,00 €1.810,74
 
GRANIT Temperature sensor engine cooling, thermostat housing
10%
GRANIT
Temperature sensor engine cooling, thermostat housing
Version: Cooling system, Thermostat housing.
€263,40 €217,69 €238,30 €196,94
 
LED work lights spotlight 31 W, 2359 lm, 148 x 95 x 58 mm, 12 / 24 V
5%
LED work lights spotlight 31 W, 2359 lm, 148 x 95 x 58 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€51,98 €42,96 €49,35 €40,79
 
Flasher unit electronic 12 V, 6 connections, with holder
10%
Flasher unit electronic 12 V, 6 connections, with holder
Version: Power rating: 12 V / 2 + 1 + 1 / 8 x 21 W, Slim version, with bracket, ...
€51,08 €42,21 €46,20 €38,18
 
Brake pad set 90 x 15 x 70 mm, foot brake
5%
Brake pad set 90 x 15 x 70 mm, foot brake
To fit as: Deutz AgroCompact 3.30 V, 3.30 F, 3.50 V, 3.50 F, 3.70 V, 3.70 F, 3.9...
€35,42 €29,27 €33,60 €27,77
 
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€627,55 €518,64
 
ZF Internal plate 4WD clutch Case IH C 42 - CS 105 Pro, Farmall 115U
5%
ZF
Internal plate 4WD clutch Case IH C 42 - CS 105 Pro, Farmall 115U
€36,54 €30,20 €34,70 €28,68
 
BOSCH Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
BOSCH
Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 mm
€10,70 €8,84
 
GRANIT Threaded spindle top link M24 x 3,0, 157 mm, category 2 IHC, Steyr
GRANIT
Threaded spindle top link M24 x 3,0, 157 mm, category 2 IHC, Steyr
Category: 2 | B (mm): 90 | I (mm): M24 x 3,0 | G (mm): 157 | C (mm): 32 | A (mm)...
€52,15 €43,10
 
FEBI Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
58%
FEBI
Feed pump 5 hole, 25/37 mm / 45 mm, flange 52 mm Valtra-Valmet
To fit as: Valtra - Valmet 6200, 6300, 6400, 6600, 6800, 8000, 8050, 8150, 8450,...
€164,27 €135,76 €69,09 €57,10
 
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
38%
MAHLE
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€489,63 €404,65 €306,00 €252,89
 
GRANIT Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
5%
GRANIT
Starter motor 12 V, 3,0 kW, 11 teeth, 229,5 mm, Ø 89 mm
€302,23 €249,78 €287,10 €237,27
 
GRANIT Bush axle housing 105 x 115 x 44 mm Case IH
5%
GRANIT
Bush axle housing 105 x 115 x 44 mm Case IH
€55,48 €45,85 €52,70 €43,55
 
GRANIT Potentiometer Carraro front axle 145109
5%
GRANIT
Potentiometer Carraro front axle 145109
€246,96 €204,10 €234,60 €193,88
 
GRANIT Ball joint 180 mm, C M20 x 1,5, D M22 x 1,5, taper 24 - 26 mm
5%
GRANIT
Ball joint 180 mm, C M20 x 1,5, D M22 x 1,5, taper 24 - 26 mm
A: 180 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 ...
€70,10 €57,93 €66,55 €55,00
 
Carraro Bronze bearing Ø 38,3 x 34,9 x 34,5 mm Case IH
Carraro
Bronze bearing Ø 38,3 x 34,9 x 34,5 mm Case IH
Outer Ø: 38,3 mm. Inner Ø: 34,9 mm. Length: 34,5 mm.
€6,80 €5,62
 
Wabco Compressor 159 cm³, 10 bar, Ø 75 mm Case IH CS 68 - CS 100
5%
Wabco
Compressor 159 cm³, 10 bar, Ø 75 mm Case IH CS 68 - CS 100
Operating pressure max.: 10 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.....
€2.144,12 €1.772,00 €2.036,90 €1.683,39
 
GRANIT Gear lever knob Ø upper 20 mm, length 35 mm, thread M8
GRANIT
Gear lever knob Ø upper 20 mm, length 35 mm, thread M8
Version: Ø top 20 mm, length 35 mm, thread M8.
€7,00 €5,79
 
GRANIT Tension spring engine brake Case IH, Steyr
GRANIT
Tension spring engine brake Case IH, Steyr
Description: For engine brake.
€8,30 €6,86
 
Showing 73 - 96 of 377

Case IH CS 75 parts

The CS 75 is a tractor you can still work on yourself, as long as the parts are right. More than 350 parts on this page fit the Case IH CS 75. They are made by GRANIT and by manufacturers such as Scharmüller, HELLA, ROCKINGER and MAHLE.

Starting and charging first

If the starter motor only clicks, test the battery and check that the earth cable is tight and clean of corrosion before anything else. A poor earth looks a lot like a dead starter. When the starter really has had it, you will find starter motors and alternators here, together with rocker switches and push button switches for the dash.

Sealing and cooling the engine

Much of the routine work on a CS 75 comes down to keeping things sealed. There are gaskets for the exhaust and inlet manifold and the water pump, sealing rings for the injection nozzles, O-rings for the feed pump and complete seal kits. Whenever an injector comes out of the head, fit a new sealing ring. The old one has been crushed flat, and reusing it lets combustion gas blow past, which shows up later as soot around the injector.

For the cooling system there are radiator hoses. Replace any hose that feels soft, has swollen or shows fine cracks before it splits on a hot day, and fit new clamps at the same time, since old clamps lose their tension.

Clutch, hitch and cab

Clutch thrust bearings, automatic drawbars and adapter plates for the drawbar frame cover the driveline and the rear end. In the cab you can replace work lamps and the gas struts for the rear window, which are worn out once the window refuses to stay open.

A height adjustable adapter plate helps if you switch between trailers with different drawbar heights. Set the hitch so the drawbar runs as level as possible and the eye and pin wear evenly.

Getting the right part

Note the model and chassis number from the rating plate. For engine parts it also helps to record the engine number on the block. Thrust bearings and many gaskets carry a stamped or printed number that you can compare with the reference numbers in the product description.

Other models from the CS series have a page of their own, so if you are ordering for one of those tractors, go to Case IH CS 78, Case IH CS 94, Case IH CS 110 or Case IH CS 120. Everything else from the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart