Menu
EUR

Case IH CS 78 tractor parts & technical data

More than 400 parts make this page a solid starting point for the Case IH CS 78. Lighting, trailer couplings and electrics for the CS series come first.

440 parts found for Case IH CS 78
Show:
Bosch/Rexroth Double pump anticlockwise 16 + 14 cm³/rpm.
Bosch/Rexroth
Output volume: 16 + 14 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 280/280 bar. Direction of rotation: Anticlockwise. Max. sp... More
Output volume: 16 + 14 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Ope...
€784,96 €648,73 €745,70 €616,28
You save 5%
GRANIT Gas strut roof window 100 N, 205 mm, stroke 60 mm Case IH, Steyr
GRANIT
suitable for: Dachluke. Newtons: 100. A: 205 mm. B: 124 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 8 mm. d2: 18 mm. Stroke: 60 mm. To fit: Roof hatch. More
suitable for: Dachluke. Newtons: 100. A: 205 mm. B: 124 mm. C: 8 mm. D...
€46,04 €38,05 €43,70 €36,12
You save 5%
GRANIT Handle right and left Case IH, Steyr
GRANIT
Installation location: rechts und links. More
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
You save 5%
Threaded rod adjuster 27 x 155 mm Case IH, Steyr
Dimensions: 27 x 155 mm. More
Dimensions: 27 x 155 mm.
€51,81 €42,82 €49,20 €40,66
You save 5%
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form: 6. More
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof h...
€46,65 €38,55 €44,30 €36,61
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 180 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.076,56 €889,72 €952,10 €786,86
You save 12%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: right. More
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
You save 10%
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: left. More
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
You save 10%
Pressure switch air conditioning with female thread, 2 blade connections
Version: With female thread, 2 blade terminals. More
Version: With female thread, 2 blade terminals.
€252,59 €208,75 €228,50 €188,84
You save 10%
GRANIT Hand brake switch mechanical M12, 12 V / 24 V, blade connection
GRANIT
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal connection. More
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal conn...
€19,90 €16,45
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr More
To fit as: Case IH, McCormick, Steyr
€520,04 €429,79 €470,50 €388,84
You save 10%
GRANIT Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
GRANIT
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€15,35 €12,69
GRANIT Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
GRANIT
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,20 €11,74
GRANIT External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
GRANIT
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€7,80 €6,45
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
MAHLE
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation angle (°): l + r 60 | Belt width (mm) / type: - | Direction of rot... More
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | ...
€448,64 €370,78 €280,40 €231,74
You save 38%
DANA Spicer Synchroniser unit, complete reverse gear Case IH CS 78 - CS 100
€776,84 €642,02 €702,85 €580,87
You save 10%
GRANIT Push button switch linkage lower 12/24 V, Ø 30 mm, green button
GRANIT
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, 4 blade terminals 6.3 x 0.8 Dustproof and splashproof More
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, ...
€32,06 €26,50 €30,45 €25,17
You save 5%
Steering column switch indicator, horn, dipped beam, main beam
Version: Functions: indicators, horn, changeover: dipped beam/full beam Connection cable with plug connection More
Version: Functions: indicators, horn, changeover: dipped beam/full bea...
€436,07 €360,39 €414,25 €342,36
You save 5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung front axle Additional control units Reversing system Front PTO More
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage...
€92,65 €76,57 €88,00 €72,73
You save 5%
Showing 169 - 192 of 440

Case IH CS 78 parts for electrics, hitching and engine

The Case IH CS 78 is well covered here, with more than 400 parts from GRANIT, Scharmüller, HELLA, ROCKINGER and MAHLE. With that many items it helps to know which part of the tractor you are working on, so here is a quick guide by system.

Charging, switches and lighting

If the battery is no longer charging, an alternator is the obvious place to start. In the cab there are rocker switches, for instance for the powershift, and push button switches for the linkage. Work lamps, partly from HELLA, and indicator position lights complete the lighting.

Before you blame the alternator, check the V-belt tension and the earth strap between engine and chassis. A slipping belt or a poor earth produces the same warning light as a failed alternator. Disconnect the battery before you fit the new one.

Drawbars, automatic hitches and adapter plates

For towing there are drawbars and automatic hitches from Scharmüller and ROCKINGER, among others. Height adjustable adapter plates let you set the hitch at the right height for your trailer. Check the pin and jaw of an automatic hitch for wear now and then. A worn pin lets the trailer eye knock when pulling away and braking, and a little grease on the mechanism keeps it locking reliably.

Engine, cooling and cab

For the engine you will find feed pump O-rings, gaskets, injector sealing rings and seal kits. On the cooling side there are radiator hoses and a water pump gasket. Fit fresh clamps with every new hose. Gas struts hold the roof hatch open. Fit them rod down so the seal stays lubricated and the strut keeps its force longer. Thrust bearings are available for the clutch, and one belongs in every clutch job even if the old bearing still runs quietly.

Confirming your model and other CS tractors

The type plate confirms if you have a CS 78. For alternators and switches, compare the reference number on the old part with the numbers shown with the item, since plugs and brackets can vary.

Within the Case IH CS series every model has a page of its own. If you also work on one of these tractors alongside your CS 78, you will find the parts for that type there:

Every other tractor from the brand can be found under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart