Menu
EUR

Case IH CS 78 tractor parts & technical data

More than 400 parts make this page a solid starting point for the Case IH CS 78. Lighting, trailer couplings and electrics for the CS series come first.

440 parts found for Case IH CS 78
Show:
Bosch/Rexroth Double pump anticlockwise 16 + 14 cm³/rpm.
5%
Bosch/Rexroth
Double pump anticlockwise 16 + 14 cm³/rpm.
Output volume: 16 + 14 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pres...
€784,96 €648,73 €745,70 €616,28
 
GRANIT Gas strut roof window 100 N, 205 mm, stroke 60 mm Case IH, Steyr
5%
GRANIT
Gas strut roof window 100 N, 205 mm, stroke 60 mm Case IH, Steyr
suitable for: Dachluke. Newtons: 100. A: 205 mm. B: 124 mm. C: 8 mm. D: 8 mm. Fo...
€46,04 €38,05 €43,70 €36,12
 
GRANIT Handle right and left Case IH, Steyr
5%
GRANIT
Handle right and left Case IH, Steyr
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
 
Threaded rod adjuster 27 x 155 mm Case IH, Steyr
5%
Threaded rod adjuster 27 x 155 mm Case IH, Steyr
Dimensions: 27 x 155 mm.
€51,81 €42,82 €49,20 €40,66
 
Gas strut for roof hatch 100 N, 275 mm
5%
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form...
€46,65 €38,55 €44,30 €36,61
 
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
16%
Scharmüller
Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.294,08 €1.069,49 €1.089,95 €900,79
 
Scharmüller Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
12%
Scharmüller
Drawbar JSV ball 50 rail 325 mm, pin Ø 25 mm, 250 kg, black
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€1.076,56 €889,72 €952,10 €786,86
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
16%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.221,12 €1.009,19 €1.028,50 €850,00
 
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
 
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
10%
GRANIT
Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
 
Pressure switch air conditioning with female thread, 2 blade connections
10%
Pressure switch air conditioning with female thread, 2 blade connections
Version: With female thread, 2 blade terminals.
€252,59 €208,75 €228,50 €188,84
 
GRANIT Hand brake switch mechanical M12, 12 V / 24 V, blade connection
GRANIT
Hand brake switch mechanical M12, 12 V / 24 V, blade connection
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal connection.
€19,90 €16,45
 
Alternator 14 V / 95 A, form B, flange 50,8 mm
10%
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr
€520,04 €429,79 €470,50 €388,84
 
GRANIT Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
GRANIT
Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€15,35 €12,69
 
GRANIT Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
GRANIT
Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,20 €11,74
 
GRANIT External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
GRANIT
External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€7,80 €6,45
 
GRANIT Shaft seal hydraulic pump Case IH, Steyr
GRANIT
Shaft seal hydraulic pump Case IH, Steyr
€34,60 €28,60
 
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø...
€1.052,10 €869,50
 
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, fan
38%
MAHLE
Alternator 14 V / 120 A, flange 56 mm, form B, fan
Pulley Ø (mm): - | Mounting hole Ø / R (mm): 8,2 / 86,0 | Form: B | Installation...
€448,64 €370,78 €280,40 €231,74
 
DANA Spicer Synchroniser unit, complete reverse gear Case IH CS 78 - CS 100
10%
DANA Spicer
Synchroniser unit, complete reverse gear Case IH CS 78 - CS 100
€776,84 €642,02 €702,85 €580,87
 
GRANIT Push button switch linkage lower 12/24 V, Ø 30 mm, green button
5%
GRANIT
Push button switch linkage lower 12/24 V, Ø 30 mm, green button
Version: 12/24 V Green button, external switch on mudguard, Ø 30 mm, 4 blade ter...
€32,06 €26,50 €30,45 €25,17
 
Steering column switch indicator, horn, dipped beam, main beam
5%
Steering column switch indicator, horn, dipped beam, main beam
Version: Functions: indicators, horn, changeover: dipped beam/full beam Connecti...
€436,07 €360,39 €414,25 €342,36
 
Rocker switch dashboard sprung front axle, PTO shaft
5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung fr...
€92,65 €76,57 €88,00 €72,73
 
Showing 169 - 192 of 440

Case IH CS 78 parts for electrics, hitching and engine

The Case IH CS 78 is well covered here, with more than 400 parts from GRANIT, Scharmüller, HELLA, ROCKINGER and MAHLE. With that many items it helps to know which part of the tractor you are working on, so here is a quick guide by system.

Charging, switches and lighting

If the battery is no longer charging, an alternator is the obvious place to start. In the cab there are rocker switches, for instance for the powershift, and push button switches for the linkage. Work lamps, partly from HELLA, and indicator position lights complete the lighting.

Before you blame the alternator, check the V-belt tension and the earth strap between engine and chassis. A slipping belt or a poor earth produces the same warning light as a failed alternator. Disconnect the battery before you fit the new one.

Drawbars, automatic hitches and adapter plates

For towing there are drawbars and automatic hitches from Scharmüller and ROCKINGER, among others. Height adjustable adapter plates let you set the hitch at the right height for your trailer. Check the pin and jaw of an automatic hitch for wear now and then. A worn pin lets the trailer eye knock when pulling away and braking, and a little grease on the mechanism keeps it locking reliably.

Engine, cooling and cab

For the engine you will find feed pump O-rings, gaskets, injector sealing rings and seal kits. On the cooling side there are radiator hoses and a water pump gasket. Fit fresh clamps with every new hose. Gas struts hold the roof hatch open. Fit them rod down so the seal stays lubricated and the strut keeps its force longer. Thrust bearings are available for the clutch, and one belongs in every clutch job even if the old bearing still runs quietly.

Confirming your model and other CS tractors

The type plate confirms if you have a CS 78. For alternators and switches, compare the reference number on the old part with the numbers shown with the item, since plugs and brackets can vary.

Within the Case IH CS series every model has a page of its own. If you also work on one of these tractors alongside your CS 78, you will find the parts for that type there:

Every other tractor from the brand can be found under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart