Menu
EUR

Case IH CS 94 tractor parts & technical data

The Case IH CS 94 from the CS Series has more than 450 matching parts on this page. Lighting, trailer couplings and electrics are best represented.

462 parts found for Case IH CS 94
Show:
Alternator 14 V / 80 A, flange 55,5 mm
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rotation: ↻ | Additional information: Dust-tight, with W connection | Belt tension... More
Belt width (mm) / type: - | Pulley spacing (mm): - | Direction of rota...
€236,43 €195,40 €217,52 €179,77
You save 8%
Radiator hose, oil cooler inner-Ø 40 mm Case IH, Steyr
€6,30 €5,21
Push button switch lift without resistance Case IH CS 68 - CS 150
Version: without resistor thread M30x1 mounting nut SW 36 plug connection DT-04 normally closed / normally open switching voltage 48V switching button... More
Version: without resistor thread M30x1 mounting nut SW 36 plug connect...
€33,11 €27,37
MAHLE Gear reduction starter 3,2 kW, 11 teeth clockwise, 204,3 mm, Ø 89 mm
€548,46 €453,27 €328,50 €271,49
You save 40%
Reman turbocharger Fendt, Case IH, Steyr
€1.456,23 €1.203,50 €1.395,52 €1.153,33
You save 4%
Valve seat outlet valve engine Sisu 320, 420, 620
€75,91 €62,74 €69,84 €57,72
You save 8%
Reman turbocharger Valtra-Valmet, Steyr, Case IH
€1.024,99 €847,10 €982,26 €811,79
You save 4%
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Hand brake switch mechanical M12, 12 V / 24 V, blade connection
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal connection. More
Version: Thread M12, Operating voltage: 12 V/24 V, blade terminal conn...
€20,80 €17,19
LED work lights spotlight 43 W, 3600 lm, 157 x 95 x 76 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 157 x 95 x 76 mm. Light function: Far-reaching illumination. Effective luminous f... More
Nominal voltage: 12 / 24 V. Form: Rectangular. Dimensions W x H x D: 1...
€72,92 €60,26 €67,09 €55,44
You save 8%
HELLA Work lamp flood beam H3 35 / 70 W, 12 / 24 V, 154 x 104 x 84 mm
HELLA
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Dimensions W x H x D: 154 x 104 x 84 mm. Mounting type: Mounting, bolted. Conn... More
Bulb: H3. Bulbs included: No. Light function: Close-range illumination...
€38,51 €31,83 €37,08 €30,65
You save 4%
HELLA Indicator/position light 120 x 80 x 55 mm, P21W, R5W left / right
HELLA
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 120 mm. Form: Rectangular. Height: 80... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment:...
€28,18 €23,29
HELLA Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, without bracket
HELLA
Version: Power rating: 12 V / 2 + 1 +1 x 21 W / 8 x 21 W, With hazard warning function, without bracket. Protection class: 64. Nominal voltage: 12 V. ... More
Version: Power rating: 12 V / 2 + 1 +1 x 21 W / 8 x 21 W, With hazard ...
€73,40 €60,66 €56,55 €46,74
You save 23%
End plate steering valve 210 bar, 140 x 40 x 104 mm
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombination erforderlich. Die Endsektion ist mit vier Bohrungen zur Befestigung des We... More
Description: Diese Endsektion ist zum Abschluss einer Wegeventilkombin...
€363,63 €300,52 €334,54 €276,48
You save 8%
ZF Internal plate 4WD clutch Case IH C 42 - CS 105 Pro, Farmall 115U
€38,13 €31,51 €35,08 €28,99
You save 8%
Stabilus Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
Stabilus
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm): 8 | B (mm): 165 | d2 (mm): 19 | To fit: Door | Stroke (mm): 108 More
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm)...
€138,26 €114,26 €127,20 €105,12
You save 8%
Pressure switch differential, voorschakelgroep - powershiftgroep
Version: For differential, control unit, control group - powershift group More
Version: For differential, control unit, control group - powershift gr...
€288,95 €238,80 €265,83 €219,70
You save 8%
Brake light switch contact switch with connection cable IHC CS 78-150
Version: Contact switch with connection cable More
Version: Contact switch with connection cable
€239,33 €197,79 €220,18 €181,97
You save 8%
Push button switch lift, extern circuit Case IH, Steyr
Version: Raise control hydraulics External switch (on mudguard) More
Version: Raise control hydraulics External switch (on mudguard)
€39,33 €32,50 €36,18 €29,90
You save 8%
Push button switch PTO shaft off, extern circuit, 36 g Case IH, Steyr
Version: PTO shaft off, External switch (on mudguard) More
Version: PTO shaft off, External switch (on mudguard)
€37,05 €30,62 €34,09 €28,17
You save 8%
SACHS Thrust bearing 65 x 96 x 23 mm
SACHS
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
€140,56 €116,17 €129,32 €106,87
You save 8%
Clutch plate 330 sintered 28 x 32 mm, 17 splines IHC, Steyr
Menke no.: 57896 | Additional information: Made in Germany | Dimensions (mm): 28 x 32 17 grooves | Material specifications: Sintered clutch lining More
Menke no.: 57896 | Additional information: Made in Germany | Dimension...
€252,02 €208,28 €231,86 €191,62
You save 8%
MAHLE Alternator 14 V, 120 A, flange 50,8 mm Case IH, John Deere, Laverda, Steyr
MAHLE
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mounting L / d / R (mm): 50,8 / 10,2 / 86,0 | Belt width (mm) / type: - | Nominal v... More
Form: B | Charging current (A): 120 | Installation angle (°): 0 | Mou...
€543,36 €449,06 €488,16 €403,44
You save 10%
Elring Cylinder head gasket set 1,4 mm, combined soft material/metal gasket engine TD226B
DANA Spicer King pin front axle 725/534 Case IH CS 78 - CS 100
€103,25 €85,33 €98,95 €81,78
You save 4%
FEBI Mirror wide-angle right / left 314 x 228 mm, rod Ø 14 - 22 mm
FEBI
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95 More
Tractor types: Case IH Maxxum 5120, 5130, 5140, 5150 as of Bj. 95
€115,03 €95,07 €98,75 €81,61
You save 14%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, 254 mm, clockwise
€510,93 €422,26 €306,01 €252,90
You save 40%
HELLA Starter motor 12 V, 3,0 kW, 11 teeth, clockwise
€606,89 €501,56 €467,60 €386,44
You save 23%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€75,38 €62,30 €69,35 €57,31
You save 8%
Wabco Reservoir for antifreeze pump
€111,59 €92,22 €102,66 €84,85
You save 8%
Master brake cylinder Case IH, Steyr, New Holland
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€140,19 €115,86 €128,97 €106,59
You save 8%
Scharmüller Piton Fix rail width 330 mm, locking pin Ø 25 mm, working length 155 mm
Scharmüller
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Colour: Black. Overhang: 155 mm. Description: Height adjustable wit... More
Hole pattern: 140 x 80 mm. Hole: M20 mm. Load capacity: 3000 kg. D-val...
€996,85 €823,84 €983,19 €812,56
You save 1%
Connection cable MS with LED light, 2,5 m
Length: 2.5 m. Version: The connection cable with LED light makes it much easier to connect the cable to the vehicle in the dark. The LED lights up wh... More
Length: 2.5 m. Version: The connection cable with LED light makes it m...
€100,09 €82,72 €92,08 €76,10
You save 8%
Clamp Case IH CS 78-150
€32,70 €27,02 €30,08 €24,86
You save 8%
Feed pump in-line pump 3 bores, hole spacing 52/34 mm, flange 26 mm
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacing: 34 mm, Flange to lever end: 26 mm. Menke no.: 45815. More
Version: 3 holes, Vertical hole spacing: 52 mm, Horizontal hole spacin...
€36,59 €30,24
Tank cap tank collar Ø 83 mm bayonet connection, venting, lockable
€83,41 €68,93 €76,74 €63,42
You save 8%
Bolt set 1ste steering valve 3x M8 x 90
Technical data: 3x M8 x 90. More
Technical data: 3x M8 x 90.
€18,40 €15,21
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
GRAMMER
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Se... More
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholst...
€7.096,01 €5.864,47 €6.578,33 €5.436,64
You save 7%
Door lock, left Massey Ferguson, Case IH, Steyr
€49,57 €40,97 €45,60 €37,69
You save 8%
Scharmüller Drawbar ball 50, rail 325 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 160 mm. Plate height: 133 mm. Hole: M20... More
Rail width: 325 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€1.022,10 €844,71 €872,96 €721,45
You save 15%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Scharmüller K80 ball insert rail width 330 mm, nose weight 4000 kg, black
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 170 mm. Colour: Black. Overhang... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
LED work lights spotlight 3600 lm, 36 W, 148 x 95 x 58 mm
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€77,66 €64,18 €71,45 €59,05
You save 8%
HELLA Inserts work lamp square 83 x 83 mm, H3, 12 / 24 V, 55 W
HELLA
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power consumption: 55 W. Type: Halogen. Light function: Close-range illumination. Additio... More
Bulb: Halogen, H3. Form: Square. Nominal voltage: 12 / 24 V. Power con...
€56,19 €46,44 €54,11 €44,72
You save 4%
HELLA Indicator/position light left 95 x 85 x 54 mm, 12V21WK / R21W Claas
HELLA
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 95 mm. Form: Rectangular, two s... More
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attac...
€59,85 €49,46 €57,64 €47,64
You save 4%
Showing 145 - 192 of 462

Case IH CS 94 parts and spares

The CS 94 works hard at both ends. At the back, implements are hitched and unhitched every day, and inside the cab the switches, seat and door struts see constant use. This page lists more than 450 replacement parts that fit the Case IH CS 94, made by GRANIT and by suppliers such as Scharmüller, HELLA, ROCKINGER and GRAMMER.

Inside the cab

For the dashboard there are rocker switches, including the powershift switch, and push button switches for raising and lowering the linkage. Gas struts hold the roof hatch, door and rear window open. The seating includes air suspended tractor seats such as the Maximo Professional as well as separate seat cushions, and for night work there are work lamps, including recessed spotlights.

When fitting a new gas strut, mount it with the rod pointing down. That keeps the internal seal bathed in oil, and the strut lasts noticeably longer. If a hatch or door has a strut on each side, always replace them as a pair, otherwise the stronger one twists the frame.

Hitching and the engine bay

At the rear you will find automatic drawbars and height adjustable adapter plates that set the drawbar at the right height in the rail. Before ordering an adapter plate, measure the hole pattern of the plate currently on the tractor.

Under the bonnet there are alternators, radiator hoses, gaskets for the exhaust and inlet manifolds, O-rings for the feed pump, sealing rings and seal kits. For the driveline there are clutch thrust bearings. Radiator hoses are easy to overlook. Squeeze each one with the engine cold. A hose that feels hard and crunchy or soft and spongy is due for replacement, even if it is not leaking yet. Fit new hose clamps at the same time, since old clamps lose their grip.

Getting the right part

Check the type plate first to confirm the tractor is a CS 94 and not another model from the CS series. With switches, compare the symbol and the shape of the button. If the old part carries a reference number, hold it against the product details before you order.

Other CS models each have a page of their own, which is useful if you run more than one: Case IH CS 75, Case IH CS 78, Case IH CS 110 and Case IH CS 120. For every other model from the brand, start at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart