Menu
EUR

Case IH CVX 1170 tractor parts & technical data

Working with a Case IH CVX 1170? You will find more than 350 parts for this model here, covering steering and front axle, lighting and trailer couplings.

360 parts found for Case IH CVX 1170
Show:
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
MAHLE Alternator 14 V / 120 A, flange 56 mm, form B, W-connection
MAHLE
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm): 56,0 | Additional information: Dust-tight, with fan, with W connection | Nomi... More
Nominal voltage (V): 14 | Installation angle (°): 0 | Flange size (mm...
€525,90 €434,63 €313,00 €258,68
You save 40%
GRANIT Multifunction switch 2 lever, cable with 2 plugs
GRANIT
Version: 2 levers: forwards/reverse/neutral, For indicator light, lights, horn, windscreen wipers Connection cable with 2 plugs More
Version: 2 levers: forwards/reverse/neutral, For indicator light, ligh...
€1.128,33 €932,50 €1.071,90 €885,87
You save 5%
MAHLE Air conditioning compressor 12 V, R 134a, pulley-Ø 152 mm, 2 grooves, Rotolock
MAHLE
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quantity (ccm): 285 | Pulley Ø (mm): 152 | No. of grooves: 2 | Connection: Rotolock... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Fixing: EM | Oil quan...
€653,40 €540,00 €408,35 €337,48
You save 38%
GRANIT Ball head with female thread 263 mm, taper 23,5 - 26,5 mm
GRANIT
A (mm): 263 | D (mm): M24 x 1,5 | Taper (mm): 23,5 - 26,5 | F (mm): 26,5 | E (mm): 23,5 | C (mm): M20 x 1,5 More
A (mm): 263 | D (mm): M24 x 1,5 | Taper (mm): 23,5 - 26,5 | F (mm): 26...
€61,58 €50,89 €58,50 €48,35
You save 5%
GRANIT Bush rotary housing and steering cylinder Case IH, Renault, Steyr
€67,52 €55,80 €64,10 €52,98
You save 5%
GRANIT Ball joint 265 mm, taper 23,5 - 26,5 mm, M20 x 1,5, M24 x 1,5
GRANIT
A: 265 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 265 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€91,29 €75,45 €86,70 €71,65
You save 5%
Carraro Pivot bush 115 x 125 x 42 mm Carraro front axle John Deere, Case IH
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 42 mm.
€72,24 €59,70 €68,60 €56,69
You save 5%
Carraro Pivot bush Carraro front axle 115 x 125 x 44 mm
Carraro
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 44 mm. More
Outer Ø: 125 mm. Inner Ø: 115 mm. Length: 44 mm.
€69,58 €57,50 €66,10 €54,63
You save 5%
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm. More
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€14,60 €12,07
Carraro Guide Carraro front axle outer-Ø 85 mm, inner-Ø 80 mm, length 25 mm
Carraro
Outer Ø: 85 mm. Inner Ø: 80 mm. Length: 25 mm. More
Outer Ø: 85 mm. Inner Ø: 80 mm. Length: 25 mm.
€35,76 €29,55 €33,95 €28,06
You save 5%
Wabco Reservoir for antifreeze pump
€106,94 €88,38 €101,55 €83,93
You save 5%
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€314,60 €260,00 €298,85 €246,98
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
GRANIT Cooling fan Ø 570 mm Case IH, New Holland, Steyr
€193,99 €160,32 €184,25 €152,27
You save 5%
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€99,24 €82,02 €94,25 €77,89
You save 5%
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€100,84 €83,34 €95,75 €79,13
You save 5%
GRANIT Handle right and left Case IH, Steyr
GRANIT
Installation location: rechts und links. More
Installation location: rechts und links.
€167,81 €138,69 €159,40 €131,74
You save 5%
Showing 121 - 144 of 360

Case IH CVX 1170 parts for hitching, engine and cab

A CVX 1170 spends much of its working life pulling heavy trailers and implements, so this page starts at the back of the tractor. It holds more than 350 replacement parts for the Case IH CVX 1170 from makers such as Scharmüller, ROCKINGER, GRANIT, HELLA and Carraro.

Drawbar, Piton Fix and adapter plate

For the hitch rail there are drawbars, a Piton Fix for low hitching and adapter plates that let you mount a different coupling system on the existing rail. Pins and catch hooks wear oval over time. Check the play whenever the tractor is in the yard, because a worn pin sends a jolt through the whole driveline every time you pull away or brake with a loaded trailer.

Steering ball joints are part of the same picture. A joint with play shows up as vague steering and knocking over rough ground.

Engine, linkage and cab

Around the engine you will find water pump gaskets, sealing rings, O-rings such as the one on the oil filler cap, other seals and an alternator. Bushes for the lower link shaft keep the three-point linkage tight. Gas struts for the bonnet or rear window lose force gradually. Where two struts are fitted, replace both, otherwise the panel twists and the new strut ends up carrying the whole load.

In the cab there are rocker switches, including one for the front work lamps, push button switches and a tractor seat. Work lamps come as square spotlights for flush mounting.

A practical point on the alternator: when the charge warning light comes on, check the belt, the battery terminals and the earth strap between engine and frame first. Only when those are in order and the charging voltage is still low is the alternator itself to blame. Disconnect the battery before fitting a new unit.

Getting the right part first time

Confirm on the type plate that the tractor really is a CVX 1170 and compare the reference number on the old part with the new one. With seals and O-rings the fitting position matters as much as the number, so note where the old part came from before throwing it away.

The CVX series includes further types, each with a page of its own. Useful for contractors and farms running several CVX tractors:

Parts that apply across the brand are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart