Menu
EUR

Case IH CVX 1170 tractor parts & technical data

Working with a Case IH CVX 1170? You will find more than 350 parts for this model here, covering steering and front axle, lighting and trailer couplings.

360 parts found for Case IH CVX 1170
Show:
Gas strut for roof hatch 100 N, 275 mm
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof hatch. Form: 6. More
Newtons: 100. A: 275 mm. B: 135 mm. C: 10 mm. D: 10 mm. To fit: roof h...
€46,65 €38,55 €44,30 €36,61
You save 5%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.294,08 €1.069,49 €1.089,95 €900,79
You save 16%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.221,12 €1.009,19 €1.028,50 €850,00
You save 16%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.621,20 €1.339,83
GRANIT Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: right. More
Length min./max.: 500 - 800 mm. Installation location: right.
€260,83 €215,56 €235,95 €195,00
You save 10%
GRANIT Telescopic mirror bracket left 500 - 800 mm Case IH, Steyr
GRANIT
Length min./max.: 500 - 800 mm. Installation location: left. More
Length min./max.: 500 - 800 mm. Installation location: left.
€260,83 €215,56 €235,95 €195,00
You save 10%
Pressure switch air conditioning with female thread, 2 blade connections
Version: With female thread, 2 blade terminals. More
Version: With female thread, 2 blade terminals.
€252,59 €208,75 €228,50 €188,84
You save 10%
Push button switch front power lift lowering 48 V, button green, Ø 30 mm
Version: Button function, 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal seri... More
Version: Button function, 48 V switching voltage, Green button, make c...
€34,98 €28,91 €33,20 €27,44
You save 5%
HELLA Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks.... More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€15,85 €13,10
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr More
To fit as: Case IH, McCormick, Steyr
€520,04 €429,79 €470,50 €388,84
You save 10%
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150, 160, 170, 175, 195, 1135, 1145, 1155, 1170, 1190, 1195 More
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150,...
€142,82 €118,03 €135,65 €112,11
You save 5%
GRANIT Cardan shaft bearing 50 x 72 x 12 mm Case IH, Renault, Steyr
GRANIT
Height 1 (mm): 12 | Outer Ø (mm): 72 | Dimensions (mm): 50 x 72 x 12 | Inner Ø (mm): 50 More
Height 1 (mm): 12 | Outer Ø (mm): 72 | Dimensions (mm): 50 x 72 x 12 ...
€150,77 €124,60 €143,20 €118,35
You save 5%
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
GRANIT External plate PTO clutch 3 mm, inner 135 mm, outer 193,5 mm
GRANIT
Version: Thickness: 3 mm Inner: 135 mm Outer: 193.5 mm More
Version: Thickness: 3 mm Inner: 135 mm Outer: 193.5 mm
€104,04 €85,98 €98,80 €81,65
You save 5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung front axle Additional control units Reversing system Front PTO More
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage...
€92,65 €76,57 €88,00 €72,73
You save 5%
FEBI Alternator 14 V / 95 A, form B, flange 50,8 mm
FEBI
To fit as: Case IH, McCormick, Steyr More
To fit as: Case IH, McCormick, Steyr
€399,30 €330,00 €141,74 €117,14
You save 65%
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
Carraro Seal kit front axle Case IH, New Holland, Steyr
€131,89 €109,00 €125,25 €103,51
You save 5%
Carraro Pin upper arm Carraro front axle Ø 37 / 45 / 59,5 mm, length 233 mm
€409,59 €338,50 €389,10 €321,57
You save 5%
Disc steering cylinder and housing Carraro front axle 145706
€39,87 €32,95 €37,85 €31,28
You save 5%
Carraro Seal front axle 180 x 150 x 14,5/16 mm John Deere, Case IH
€65,64 €54,25 €62,35 €51,53
You save 5%
Seal kit hydraulic steering Case IH, Steyr, New Holland
€120,24 €99,37 €114,20 €94,38
You save 5%
Showing 145 - 168 of 360

Case IH CVX 1170 parts for hitching, engine and cab

A CVX 1170 spends much of its working life pulling heavy trailers and implements, so this page starts at the back of the tractor. It holds more than 350 replacement parts for the Case IH CVX 1170 from makers such as Scharmüller, ROCKINGER, GRANIT, HELLA and Carraro.

Drawbar, Piton Fix and adapter plate

For the hitch rail there are drawbars, a Piton Fix for low hitching and adapter plates that let you mount a different coupling system on the existing rail. Pins and catch hooks wear oval over time. Check the play whenever the tractor is in the yard, because a worn pin sends a jolt through the whole driveline every time you pull away or brake with a loaded trailer.

Steering ball joints are part of the same picture. A joint with play shows up as vague steering and knocking over rough ground.

Engine, linkage and cab

Around the engine you will find water pump gaskets, sealing rings, O-rings such as the one on the oil filler cap, other seals and an alternator. Bushes for the lower link shaft keep the three-point linkage tight. Gas struts for the bonnet or rear window lose force gradually. Where two struts are fitted, replace both, otherwise the panel twists and the new strut ends up carrying the whole load.

In the cab there are rocker switches, including one for the front work lamps, push button switches and a tractor seat. Work lamps come as square spotlights for flush mounting.

A practical point on the alternator: when the charge warning light comes on, check the belt, the battery terminals and the earth strap between engine and frame first. Only when those are in order and the charging voltage is still low is the alternator itself to blame. Disconnect the battery before fitting a new unit.

Getting the right part first time

Confirm on the type plate that the tractor really is a CVX 1170 and compare the reference number on the old part with the new one. With seals and O-rings the fitting position matters as much as the number, so note where the old part came from before throwing it away.

The CVX series includes further types, each with a page of its own. Useful for contractors and farms running several CVX tractors:

Parts that apply across the brand are collected under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart