Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€90,28 €74,61 €81,65 €67,48
You save 10%
MANN-FILTER Hydraulics- / getriebeöl filters WH980/3, HF6553
€67,02 €55,39 €39,85 €32,93
You save 41%
Wabco Antifreeze pump 13 bar, 0,2 cm³, without control connection 4
Wabco
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 bar. Delivery volume: 0.2 cm³. Contents: 500 ml. Version: • Prevents equipment... More
Connection: 1x M12 x 1.5 / 3x M22 x 1.5. Operating pressure max.: 13 b...
€288,66 €238,56 €274,20 €226,61
You save 5%
GRANIT Master brake cylinder Case IH, Steyr, New Holland
GRANIT
Reference no.: 133135155, 133135418. More
Reference no.: 133135155, 133135418.
€134,35 €111,03 €127,60 €105,45
You save 5%
Gasket cooling channel, thermostat housing CS 68, 75, engine Sisu 320D
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
You save 5%
Door lock, left Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Spring right / left fender Case IH, New Holland, Steyr
€44,04 €36,40 €41,80 €34,55
You save 5%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.414,07 €1.168,65 €1.082,75 €894,83
You save 23%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€28,25 €23,35
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
Bosch/Rexroth Hydraulic pump 45 cm³ right Case IH, New Holland, Steyr
Bosch/Rexroth
Direction of rotation: Right | Output volume (cc/rev): 45 More
Direction of rotation: Right | Output volume (cc/rev): 45
€4.008,32 €3.312,66 €3.807,90 €3.147,02
You save 5%
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Scharmüller
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Dc-value (kN): 106 | D-value (... More
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole...
€578,40 €478,02
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
GRAMMER Tractor seat Maximo Evolution Dynamic air suspended, 550 mm
GRAMMER
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | Suspension: Air suspension | Side horizontal suspension: Yes | Track gauge (mm):... More
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | ...
€6.763,90 €5.590,00 €6.425,70 €5.310,50
You save 5%
GRANIT Gear reduction starter 12 V, 4,2 kW, 11 teeth, 226 mm, clockwise
€317,36 €262,28 €301,45 €249,13
You save 5%
GRANIT Bush lower arms Case IH, New Holland, Steyr
€34,67 €28,65 €32,90 €27,19
You save 5%
ZF Brake disc brake Ø 242,5 mm, thickness 4,75 mm, inner-Ø 56 mm
€250,11 €206,70 €237,60 €196,36
You save 5%
GRANIT Wheel brake cylinder mineral oil Case IH, New Holland, Steyr
€1.588,73 €1.313,00 €1.509,25 €1.247,31
You save 5%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.456,00 €2.029,75
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€55,61 €45,96 €52,80 €43,64
You save 5%
Showing 49 - 72 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart