Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Gasket cooling channel CS 68, 75, engine Sisu 320D
€54,44 €44,99 €50,08 €41,39
You save 8%
Exhaust manifold Case IH, Steyr
Water pump Case IH CVX 140-1195, New Holland T7510-T7550, Steyr
€418,35 €345,74 €384,88 €318,08
You save 8%
Thermostat Ø 54 mm, 79 °C
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€19,81 €16,37
Crankshaft seal rear Ø 110 x 140 x 14 mm Case IH, Steyr, New Holland
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm. More
Outer Ø: 140 mm. Width: 14 mm. Inner Ø: 110 mm.
€103,56 €85,59 €95,28 €78,74
You save 8%
Cylinder head gasket engine Sisu
€82,88 €68,50 €76,25 €63,02
You save 8%
Bearing windshield frame shock absorber Case IH C 42, CVX 1195
€48,23 €39,86 €44,37 €36,67
You save 8%
Hinge half for- and rear window lens side Case IH, New Holland
€49,32 €40,76 €45,37 €37,50
You save 8%
Handle for rear screen Case IH, New Holland
€47,37 €39,15 €43,58 €36,02
You save 8%
Verbindingsblok for rear screen Case IH, New Holland
€40,00 €33,06 €36,80 €30,41
You save 8%
Adjustment pin stabilizer Case IH, Steyr
€93,93 €77,63 €86,42 €71,42
You save 8%
Pin stabilizer Case IH, Steyr
€64,65 €53,43 €59,48 €49,16
You save 8%
Sealing ring 82 x 6 mm Case IH, Steyr
Dimensions: 82 x 6 mm. More
Dimensions: 82 x 6 mm.
€11,13 €9,19
Fender bracket left Case IH, Steyr, New Holland
€660,99 €546,27 €608,11 €502,57
You save 8%
Scharmüller Drawbar K50 Cramer, rail 335 mm, pin Ø 22 mm, 31 kN
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 148 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€899,63 €743,50 €871,22 €720,02
You save 3%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€583,34 €482,10 €536,67 €443,53
You save 8%
Telescopic mirror bracket right 500 - 800 mm Case IH, Steyr
Length min./max.: 500 - 800 mm. Installation location: right. More
Length min./max.: 500 - 800 mm. Installation location: right.
€259,22 €214,23 €238,48 €197,09
You save 8%
Scharmüller Automatic hitch rail 325 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 325 mm. Detent pin Ø: 25 mm. Guide width: 26 mm. Connecti...
€1.147,51 €948,35
Pressure switch gear insertion, hydraulic filter
Version: Gear insertion, hydraulic filter. More
Version: Gear insertion, hydraulic filter.
€504,24 €416,73
Push button switch front power lift lowering 48 V, button green, Ø 30 mm
Version: Button function, 48 V switching voltage, Green button, make contact, Total button travel: 5 mm, Ø 30 mm, plug connection (AMP Superseal seri... More
Version: Button function, 48 V switching voltage, Green button, make c...
€36,50 €30,17 €33,58 €27,75
You save 8%
HELLA Rear light right hole spacing 110 mm, 12 V
HELLA
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 149 mm. Form: Rectangular. Height: 140 mm. Hole spacing: 110 mm. Housing: ... More
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. W...
€94,42 €78,03 €72,75 €60,13
You save 23%
Relays steering valve windshield wiper, nozzle and interval 6-pin
Version: For wipers, washer and intermittent wipers, 6-pin, compact plug. More
Version: For wipers, washer and intermittent wipers, 6-pin, compact pl...
€164,47 €135,93 €151,31 €125,05
You save 8%
Alternator 14 V / 95 A, form B, flange 51,2 mm, pulley-Ø 67,2 mm
To fit as: Steyr 9080 M, 9090 M, 9100 M More
To fit as: Steyr 9080 M, 9090 M, 9100 M
€179,98 €148,74 €165,58 €136,84
You save 8%
Bearing wheel hub 109,5 x 159 x 24 mm Carraro front axle 642680 Case IH
Carraro Seal front axle 180 x 150 x 14,5/16 mm John Deere, Case IH
€68,50 €56,61 €63,02 €52,08
You save 8%
Carraro Bush Ø 44 x 38,5 mm, length 8,9 mm Case IH, New Holland
Carraro
Outer Ø: 44 mm. Inner Ø: 38,5 mm. Length: 8,9 mm. More
Outer Ø: 44 mm. Inner Ø: 38,5 mm. Length: 8,9 mm.
€16,70 €13,80
Carraro Bronze bearing Ø 53 x 48 x 40 mm Massey Ferguson, Case IH, New Holland
Carraro
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm. More
Outer Ø: 53 mm. Inner Ø: 48 mm. Length: 40 mm.
€15,23 €12,58
Seal PTO shaft end piece 94 x 118 x 12 mm
Version: 94 x 118 x 12 mm. More
Version: 94 x 118 x 12 mm.
€105,38 €87,09 €96,95 €80,12
You save 8%
Dayco Multi-rib belt Powerband air conditioning 8 ribs, 1780 mm
Dayco
Length: 1780 mm. Ribs: 8 n. More
Length: 1780 mm. Ribs: 8 n.
€75,88 €62,71 €69,81 €57,69
You save 8%
Gasket exhaust Case IH, Steyr
€44,98 €37,17 €41,38 €34,20
You save 8%
Inlet valve engine Sisu 320-620
€38,19 €31,56 €35,13 €29,04
You save 8%
Main bearing standard Ø 85 mm
€50,48 €41,72 €46,44 €38,38
You save 8%
Piston ring set 3 rings Ø 108 mm, 3 mm trapezoidal ring / 3 mm / 4 mm
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm. More
Dimensions: 3 rings, Ø 108 mm, 3 mm (trapezoidal ring) / 3 mm / 4 mm.
€48,73 €40,27 €44,83 €37,05
You save 8%
Gas strut hood 1000 N, 785 mm, stroke 340 mm
suitable for: Motorhaube. Newtons: 1000. A: 785 mm. B: 402 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 10 mm. d2: 23 mm. Stroke: 340 mm. To fit: bonnet. More
suitable for: Motorhaube. Newtons: 1000. A: 785 mm. B: 402 mm. C: 8 mm...
€120,95 €99,96 €111,27 €91,96
You save 8%
Showing 241 - 288 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart