Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
5%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-rin...
€55,05 €45,50 €52,25 €43,18
 
GRANIT Lever switch joystick (joystick), with connector
5%
GRANIT
Lever switch joystick (joystick), with connector
Version: Joystick Connection cable with plug
€690,55 €570,70 €656,00 €542,15
 
Rocker switch control panel differential catch, airco
5%
Rocker switch control panel differential catch, airco
Version: Control panel Differential lock Speed range, heater, ventilation and ai...
€154,76 €127,90 €147,00 €121,49
 
Rocker switch dashboard sprung front axle, PTO shaft
5%
Rocker switch dashboard sprung front axle, PTO shaft
Version: Dashboard 1 > 0 Armrest Electrical control unit Front linkage Sprung fr...
€92,65 €76,57 €88,00 €72,73
 
FEBI Alternator 14 V / 95 A, form B, flange 50,8 mm
65%
FEBI
Alternator 14 V / 95 A, form B, flange 50,8 mm
To fit as: Case IH, McCormick, Steyr
€399,30 €330,00 €141,74 €117,14
 
GRANIT Pin lower arms Carraro front axle 147984
5%
GRANIT
Pin lower arms Carraro front axle 147984
€353,93 €292,50 €336,20 €277,85
 
GRANIT Bolt upper arm CARRARO front axle 147984 Case IH, New Holland
5%
GRANIT
Bolt upper arm CARRARO front axle 147984 Case IH, New Holland
€153,19 €126,60 €145,50 €120,25
 
GRANIT Seal PU 55 x 70 x 7 mm
GRANIT
Seal PU 55 x 70 x 7 mm
€12,45 €10,29
 
GRANIT Sealing ring 115 x 154 x 5,5 mm Ford, Case IH, Steyr, New Holland
5%
GRANIT
Sealing ring 115 x 154 x 5,5 mm Ford, Case IH, Steyr, New Holland
€38,18 €31,55 €36,25 €29,96
 
Carraro Bush 80 x 86 x 34,5 mm Case IH, New Holland
5%
Carraro
Bush 80 x 86 x 34,5 mm Case IH, New Holland
€72,16 €59,64 €68,55 €56,65
 
Universal joint axle drive 27 x 71 mm, maintenance-free
5%
Universal joint axle drive 27 x 71 mm, maintenance-free
€76,71 €63,40 €72,85 €60,21
 
GRANIT O-ring lower arm Carraro front axle 145706
GRANIT
O-ring lower arm Carraro front axle 145706
€2,84 €2,35
 
Carraro Seal front axle 180 x 150 x 14,5/16 mm John Deere, Case IH
5%
Carraro
Seal front axle 180 x 150 x 14,5/16 mm John Deere, Case IH
€65,64 €54,25 €62,35 €51,53
 
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
5%
Carraro
Pivot bush 105 x 115 x 44 mm Carraro front axle
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€59,71 €49,35 €56,70 €46,86
 
GRANIT Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
5%
GRANIT
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
Piston Ø: 31,4 mm.
€265,58 €219,49 €252,30 €208,51
 
GRANIT Clutch pedal return spring 98 mm, Ø 3 mm
GRANIT
Clutch pedal return spring 98 mm, Ø 3 mm
€21,80 €18,02
 
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
12%
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€664,77 €549,40 €587,90 €485,87
 
Exhaust manifold Case IH, Steyr
Exhaust manifold Case IH, Steyr
€1.282,00 €1.059,50
 
Clamp New Holland, Steyr, Case IH
5%
Clamp New Holland, Steyr, Case IH
€55,91 €46,21 €53,10 €43,88
 
Showing 145 - 168 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart