Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
16%
Scharmüller
Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.122,52 €927,70 €945,45 €781,36
 
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
16%
Scharmüller
Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€913,57 €755,02 €769,50 €635,95
 
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€27,80 €22,98
 
Scharmüller Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
16%
Scharmüller
Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€1.049,90 €867,69 €884,31 €730,83
 
Scharmüller Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Scharmüller
Drawbar 640 mm, 90 x 50 mm, pin 31,5 mm, 78,5 kN, position 1
Category: Drawbar | Pin Ø (mm): 31,5 | D-value (kN): 78,5 | Version: Standard | ...
€377,90 €312,31
 
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustm...
€792,55 €655,00
 
Bush wheel hub 40 x 44 x 35 mm
Bush wheel hub 40 x 44 x 35 mm
€10,55 €8,72
 
LED work lights flood beam 24 W, 1200 lm, 101 x 76 mm, 12 / 24 V
10%
LED work lights flood beam 24 W, 1200 lm, 101 x 76 mm, 12 / 24 V
Nominal voltage (V): 12 / 24 | Voltage range (V): 10 - 30 | Bulb: LED | Bulbs in...
€61,57 €50,88 €55,70 €46,03
 
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
16%
Scharmüller
Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.390,39 €1.149,08 €1.171,10 €967,85
 
Scharmüller Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Scharmüller
Drawbar frame prepared for drawbar 71,9 kN, 2000 kg, rail 335 mm
Version: Prepared for drawbar | Detent pin Ø (mm): 22 | Load capacity (kg): 2000...
€1.228,70 €1.015,45
 
GRANIT Pin upper arm CARRARO front axle 147984 Case IH, New Holland
5%
GRANIT
Pin upper arm CARRARO front axle 147984 Case IH, New Holland
€163,83 €135,40 €155,60 €128,60
 
Scharmüller Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M20
Scharmüller
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M20
Load capacity: 2000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 160 ...
€578,40 €478,02
 
GRAMMER Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
GRAMMER
Tractor seat Maximo Comfort Plus Case CVX, Steyr, New Holland
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€2.197,40 €1.816,03
 
GRANIT Bush 115 x 125 x 42 mm Case IH
5%
GRANIT
Bush 115 x 125 x 42 mm Case IH
€53,93 €44,57 €51,20 €42,31
 
GRANIT King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
5%
GRANIT
King pin bore 15 mm, outer-Ø 28 mm, hole spacing 66 mm Carraro front axle
€38,27 €31,63 €36,35 €30,04
 
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
5%
Oil sump gasket Massey Ferguson, Case IH, Steyr, New Holland
€74,31 €61,41 €70,55 €58,31
 
Passenger seat plastic black
Passenger seat plastic black
To fit: New Holland. Colour: Schwarz. Upholstery type: Plastic, black.
€334,45 €276,41
 
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.863,82 €1.540,35 €1.464,40 €1.210,25
 
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
18%
Walterscheid
Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. C...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
 
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: ...
€39,10 €32,31
 
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
5%
GRAMMER
Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest...
€5.136,45 €4.245,00 €4.879,60 €4.032,73
 
Showing 1 - 24 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart