Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
GRANIT Gas strut door 500 N, 205 mm, stroke 58 mm Case IH, Steyr, New Holland
GRANIT
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d1: 8 mm. d2: 19 mm. To fit: Door. Form: 6. More
Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Stroke: 58 mm. d...
€33,53 €27,71 €31,85 €26,32
You save 5%
Door lock, right Massey Ferguson, Case IH, Steyr
€47,50 €39,26 €45,10 €37,27
You save 5%
GRANIT Bearing windshield frame shock absorber Case IH C 42, CVX 1195
€46,22 €38,20 €43,90 €36,28
You save 5%
Gas strut door 500 N, 205 mm Case IH, Steyr, New Holland
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 mm. Form: 6. To fit: door. More
suitable for: Tür. Newtons: 500. A: 205 mm. B: 105 mm. C: 8 mm. D: 8 ...
€36,16 €29,88 €32,70 €27,02
You save 10%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
Fender bracket left Case IH, Steyr, New Holland
€665,10 €549,67 €601,75 €497,31
You save 10%
HELLA Rear light left hole spacing 110 mm, 12 V
HELLA
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. Width: 155 mm. Form: Rectangular. Height: 140 mm. Hole spacing: 110 mm. Material:... More
Bulb: P21W, R5W. Colour: Red/yellow. Connection: Circular connector. W...
€95,00 €78,51 €72,75 €60,12
You save 23%
Cobo Indicator/position light oval PY21W, R5W left
Cobo
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation location: Left. Cable length: 1200 mm. Type: Bulb. More
Bulb: 12V21WKG / PY21W, 12V5WK / R5W. Form: Oval. Installation locatio...
€107,88 €89,16 €102,45 €84,67
You save 5%
GRANIT Hydraulic pump Mega flow 56/64 cm³/rpm. Case IH CVX 140 - 1195
GRANIT
Output volume (cc/rev): 56/ 64 More
Output volume (cc/rev): 56/ 64
€6.632,01 €5.481,00 €6.000,35 €4.958,97
You save 10%
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€950,65 €785,66
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.114,70 €921,24
Scharmüller Drawbar retrofit kit pin-Ø 31,5 mm, 685 mm, category 2, black
Scharmüller
Category: Drawbar | Colour: Black | Trailer load (kg): 11000 | Pin Ø (mm): 31,5 | Width (mm): 60 | Length (mm): 685 | Mounting position: 2 | Height (... More
Category: Drawbar | Colour: Black | Trailer load (kg): 11000 | Pin Ø ...
€830,40 €686,28
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
GRANIT Contact switch differential / four-wheel drive, brake pedal
GRANIT
Version: For differential/four-wheel drive, brake pedal Connection cable with plug More
Version: For differential/four-wheel drive, brake pedal Connection cab...
€148,59 €122,80 €141,15 €116,65
You save 5%
Direction switch forwards - idle - forwards, 114 g
Version: Forwards - neutral - reverse More
Version: Forwards - neutral - reverse
€329,24 €272,10 €312,75 €258,47
You save 5%
Brake light switch mechanical with plug connection
Version: With plug connection More
Version: With plug connection
€100,43 €83,00 €95,40 €78,84
You save 5%
Rocker switch control panel differential catch, airco
Version: Control panel Differential lock Speed range, heater, ventilation and air conditioning More
Version: Control panel Differential lock Speed range, heater, ventilat...
€154,76 €127,90 €147,00 €121,49
You save 5%
GRANIT Contact switch driver’s seat with magnet, electric
GRANIT
Version: Driver’s seat Switch assembly with magnet More
Version: Driver’s seat Switch assembly with magnet
€97,80 €80,83
GRANIT Starter switch 12 / 24 V, 6 blade terminals, M26 x 1,5, 2 keys
GRANIT
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x 0.8 / 9.5 x 1.2 mm) Locking cylinder with protection against water 2 keys (type ... More
Version: Operating voltage: 12 V / 24 V With 6 blade terminals (6.3 x ...
€70,02 €57,87 €66,50 €54,96
You save 5%
FEBI Hydraulics- / getriebeöl filters HD722, HF35320
€127,72 €105,55 €34,83 €28,79
You save 73%
FEBI Belt tensioner Case IH CVX 140, 150, 160, 175, 195
FEBI
Belt tensioner Case IH CVX 140, 150, 160, 175, 195 More
Belt tensioner Case IH CVX 140, 150, 160, 175, 195
€505,27 €417,58 €82,02 €67,79
You save 84%
FEBI Engine oil filter Ø 108 mm, height 144,2 mm, thread M24 x 1,5
€34,35 €28,39 €14,07 €11,63
You save 59%
GRANIT Bearing wheel hub 109,5 x 159 x 24 mm Carraro front axle 642680 Case IH
€69,04 €57,06 €65,55 €54,17
You save 5%
GRANIT Sealing ring 115 x 154 x 5,5 mm Ford, Case IH, Steyr, New Holland
€38,18 €31,55 €36,25 €29,96
You save 5%
Showing 169 - 192 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart