Menu
EUR

Case IH CVX 140 tractor parts & technical data

Does your Case IH CVX 140 need a new trailer coupling, electrics or lighting? You will find them here among more than 300 parts matched to this model.

316 parts found for Case IH CVX 140
Show:
Carraro Bush axle housing 35 x 52 x 20 mm Case IH, Massey Ferguson, New Holland
€48,52 €40,10 €46,00 €38,02
You save 5%
GRANIT Sealing ring 150 x 180 x 14,5/16 mm Carraro front axle 644662
€52,43 €43,33 €49,80 €41,16
You save 5%
Universal joint axle drive 27 x 71 mm, maintenance-free
€76,71 €63,40 €72,85 €60,21
You save 5%
ZF Shim brake Ø 248 mm, thickness 3 mm, inner-Ø 156 mm
€86,39 €71,40 €82,00 €67,77
You save 5%
Gaiter for brake linkage foot brake
€65,94 €54,50 €62,60 €51,74
You save 5%
Shim foot brake 3 mm thick Deutz Agrotron 6120.4-6160.4
€60,44 €49,95 €57,40 €47,44
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 x 80 mm. Guide width: 30 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pat...
€664,77 €549,40 €587,90 €485,87
You save 12%
Rail pressure sensor engine 74CTA-4V, 84CTA-4V, 98CTA-4V
€224,21 €185,30 €212,95 €175,99
You save 5%
GRANIT Gasket cooling channel CS 68, 75, engine Sisu 320D
€52,18 €43,12 €49,55 €40,95
You save 5%
Connecting rod bolt TX star 58 mm Valtra-Valmet engine Sisu 320-634
Silencer with air extraction New Holland, Steyr, Case IH
€1.539,30 €1.272,15 €1.462,30 €1.208,51
You save 5%
GRANIT Fan clutch Case IH, New Holland, Steyr
€359,71 €297,28 €341,70 €282,40
You save 5%
Water pump Case IH CVX 140-1195, New Holland T7510-T7550, Steyr
€400,91 €331,33 €380,85 €314,75
You save 5%
GRANIT V-belt tensioner Case IH, Steyr, New Holland
€159,73 €132,01 €151,70 €125,37
You save 5%
GRANIT Injector Case IH, Valtra-Valmet
€686,65 €567,48
Gas strut hood 1000 N, 785 mm, stroke 340 mm
suitable for: Motorhaube. Newtons: 1000. A: 785 mm. B: 402 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 10 mm. d2: 23 mm. Stroke: 340 mm. To fit: bonnet. More
suitable for: Motorhaube. Newtons: 1000. A: 785 mm. B: 402 mm. C: 8 mm...
€115,91 €95,79 €110,10 €90,99
You save 5%
Strut for rear screen Case IH, New Holland
€35,27 €29,15 €33,50 €27,69
You save 5%
Showing 193 - 216 of 316

Case IH CVX 140 parts and how to match them

With a Case IH CVX 140, finding the right part starts at the type plate, which tells you the exact model. Check that first. From there the part you have taken off is your best reference. Bushes, sealing rings and gaskets often have no readable number left, so measure them with a caliper. Alternators, switches and work lamps usually carry a sticker or a stamped reference number to compare with the product. More than 300 parts on this page fit the CVX 140.

What is available

Around the rear linkage there are lower link shaft bushes and sealing rings. For the engine you will find a water pump gasket, an O-ring for the oil filler cap, multi-rib belts and an alternator, while seals for the lubrication lines keep oil where it belongs. In the cab there are rocker switches for the front work lights, a push button switch for lowering the front linkage, gas struts and air suspended seats. Outside, HELLA work lamps light up the job, and at the back there are drawbar hitches, adapter plates and Piton Fix parts from Scharmüller and ROCKINGER, with Carraro and GRANIT also among the makers.

Changing the multi-rib belt

A belt that squeals on a cold start often points to a weak tensioner rather than a worn belt. When you change it, spin the tensioner and idler pulleys by hand. Any bearing that rumbles or has play should be replaced at the same time, or the new belt will soon be damaged too. Take a photo of the belt routing before removing the old one so the new belt goes on the right way first time.

Bushes in the rear linkage

When the lower link shaft has play, the lift arms wobble and implements run unevenly behind the CVX 140. Press new bushes in with a suitable drift rather than hammering straight onto the edge, and put a little grease on the shaft before assembly so nothing seizes. Check the sealing rings next to the bushes at the same time, as a worn seal lets water and dirt into the new bushes.

Other CVX models

Each model in the CVX line has its own page, which helps if you look after several and want to see only the parts that suit each machine:

The rest of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart