Menu
EUR

Case IH CVX 175 tractor parts & technical data

More than 300 parts for the Case IH CVX 175 are listed here, with steering and front axle, trailer couplings and electrics among the groups for this CVX model.

322 parts found for Case IH CVX 175
Show:
Carraro Pin upper arm Carraro front axle Ø 37 / 45 / 59,5 mm, length 233 mm
€427,40 €353,22 €393,21 €324,97
You save 8%
Disc steering cylinder and housing Carraro front axle 145706
€41,60 €34,38 €38,27 €31,63
You save 8%
Potentiometer Carraro front axle 145109
€257,70 €212,98 €237,08 €195,94
You save 8%
Ball joint 430 mm, M22 x 1,5, M22 x 1,5, taper 23 - 25 mm
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 mm. More
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper...
€170,61 €141,00 €156,96 €129,72
You save 8%
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
Carraro
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm. More
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€62,31 €51,50 €57,33 €47,38
You save 8%
Brake disc Ø 241 mm, thickness 5 mm, 28 teeth
€51,29 €42,39 €47,19 €39,00
You save 8%
Brake mechanism foot brake Ø 242 mm Case IH, New Holland, Steyr
€692,87 €572,62 €637,44 €526,81
You save 8%
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.506,09 €2.071,15
Borg Warner Cooling fan Ø 570 mm Case IH, New Holland, Steyr
€221,72 €183,24 €186,52 €154,15
You save 16%
Clamp New Holland, Steyr, Case IH
€58,35 €48,22 €53,68 €44,37
You save 8%
Silencer with air extraction New Holland, Steyr, Case IH
€1.606,26 €1.327,49 €1.477,76 €1.221,29
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
V-belt tensioner Ø 74 mm, width 46,5 mm, engine Sisu 66-74
Outer Ø: 74 mm. Width: 46,5 mm. More
Outer Ø: 74 mm. Width: 46,5 mm.
€166,68 €137,75 €153,35 €126,73
You save 8%
Optibelt Multi-rib belt Case IH CVX 140-195, 1195
€76,28 €63,04 €70,18 €58,00
You save 8%
Injector Case IH, Valtra-Valmet
Cylinder head bolt 12 x 140 mm Massey Ferguson, Case IH, Steyr
Dimensions: M12 x 140 mm. More
Dimensions: M12 x 140 mm.
€15,23 €12,58
Crankshaft seal for Ø 58 x 80 x 12 mm Case IH, Steyr, New Holland
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm. More
Outer Ø: 80 mm. Width: 12 mm. Inner Ø: 58 mm.
€105,23 €86,97 €96,81 €80,01
You save 8%
Fender bracket right complete CVX 140-195
€660,99 €546,27 €608,11 €502,57
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€815,76 €674,19
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€693,63 €573,25 €611,61 €505,46
You save 12%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
You save 21%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€676,60 €559,17
ROCKINGER Drawbar frame 330/25/32, 2000/3000 kg, 84,3 kN
ROCKINGER
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, Lamborghini, Hürlimann. More
To fit as: Case IH, Same, Doppstadt, New Holland, Deutz-Fahr, Steyr, L...
€1.378,80 €1.139,50 €1.112,34 €919,29
You save 19%
Solenoid switch valve 132 mm, PWM-valve
Version: 132 mm, PWM valve. More
Version: 132 mm, PWM valve.
€210,19 €173,71
Number plate light 12V5WGLLS / W5W, 12 V
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb. More
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb.
€39,20 €32,40
Cobo Lamp glass right, left
Cobo
Installation location: Right, left. More
Installation location: Right, left.
€20,08 €16,59
PTO shaft end piece 136 mm, 1 3/8 inch 6 grooves, 8 bores
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150, 160, 170, 175, 195, 1135, 1145, 1155, 1170, 1190, 1195 More
To fit as: Case IH CS 100, 110, 120, 130, 150, CVX 120, 130, 140, 150,...
€149,03 €123,17 €137,11 €113,31
You save 8%
Optibelt Multi-rib belt 8 ribs Fendt, Case IH, Steyr, New Holland, Deutz-Fahr
€85,49 €70,65 €78,65 €65,00
You save 8%
Pin lower arm Carraro front axle 145706 Case IH, Renault, Steyr
€559,15 €462,11 €514,42 €425,14
You save 8%
Pin upper arm Carraro front axle 145706
€94,45 €78,06 €86,89 €71,81
You save 8%
Pin upper arm Carraro front axle 145706
€136,36 €112,69 €125,45 €103,68
You save 8%
Guide lower arm Carraro front axle outer-Ø 85 mm, inner-Ø 80 mm
Thrust washer Case IH, Renault, Steyr
€69,70 €57,60 €64,12 €53,00
You save 8%
Bush rotary housing and steering cylinder Case IH, Renault, Steyr
Bush axle housing 105 x 115 x 44 mm Case IH
€57,89 €47,84 €53,26 €44,02
You save 8%
Universal joint 30,2 x 83 / 88 mm, maintenance-free
€173,86 €143,69 €159,95 €132,19
You save 8%
Nut steering cylinder and housing CARRARO front axle 642489
€33,52 €27,70 €30,84 €25,49
You save 8%
Seal kit hydraulic steering Case IH, Steyr, New Holland
€125,47 €103,69 €115,43 €95,40
You save 8%
Ball joint 430 mm, M22 x 1,5, taper 23 - 25 mm
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 mm. More
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper...
€173,62 €143,49 €159,73 €132,01
You save 8%
Carraro Sealing ring 45 x 60 x 5/6,5 mm Carraro front axle
Carraro
Inner Ø: 45 mm. Outer Ø: 60 mm. Thickness: 5/6,5 mm. More
Inner Ø: 45 mm. Outer Ø: 60 mm. Thickness: 5/6,5 mm.
€8,83 €7,29
Showing 145 - 192 of 322

Case IH CVX 175 parts for engine, linkage and controls

The Case IH CVX 175 is a tractor that clocks up hours, and the wear is spread across the whole machine. This page brings together more than 300 parts for the type, from GRANIT and from Scharmüller, HELLA, Carraro and GRAMMER.

On a tractor that works this many hours, replacing parts before they fail is often wiser than waiting for a breakdown. An alternator that occasionally stops charging, a switch that sometimes sticks or a bush with the first signs of play are all signals to act before you are stuck in the middle of the season. When you replace an alternator, renew the drive belt too if its flanks are glazed or cracked.

Controls in the cab

The cab has push buttons, such as a green one for lowering the front linkage, and rocker switches in the dashboard for the front work lights. Work lamps are available separately. For the driver there are tractor seats, among them an air suspended Maximo Dynamic and a PROBOSS seat, plus gas struts for doors and windows.

Engine and charging

Engine parts include alternators, gaskets such as the one for the water pump, and O-rings for the oil filler cap. When you replace a water pump gasket, clean work is half the job. Scrape every trace of the old gasket off both faces and avoid sealant unless the gasket is meant to be used with it, because loose bits can end up in the cooling system.

Linkage and lubrication

Around the lift arm shaft there are bushes, for example one for the lower link shaft, along with sealing rings and pins, including an upper pin. Seals for the lubrication lines keep the grease system tight. A lift arm with sideways play usually means worn bushes. Replace them on both sides at once, or the new bush will soon wear at an angle. At the rear, drawbars with a K80 ball and adapter plates complete the hitch side.

Getting it right first time

The type plate tells you whether the tractor is a CVX 175. After that the reference number on the old part settles it. The CVX 175 belongs to the Case IH CVX range, and other types from it have their own pages: Case IH CVX 130, Case IH CVX 140, Case IH CVX 150, Case IH CVX 160, Case IH CVX 170 and Case IH CVX 195. The remaining tractors of the make are under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart