Menu
EUR

Case IH CX 90 tractor parts & technical data

Keep your Case IH CX 90 from the CX series running with more than 250 matching parts on this page, among them electrics, trailer couplings and lighting.

261 parts found for Case IH CX 90
Show:
Evaporator block type #8/10 O-ring Case IH CX 50 - MX 170 Maxxum
8%
Evaporator block type #8/10 O-ring Case IH CX 50 - MX 170 Maxxum
Male thread: #8/10 O-Ring | Equipment: Block Type
€1.190,49 €983,88 €1.095,25 €905,17
 
Start safety switch PTO M16 x 2 Case IH
Start safety switch PTO M16 x 2 Case IH
Version: PTO shaft (contact function) Thread: M16 x 2 With plug connection
€116,18 €96,01
 
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
8%
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€37,68 €31,14 €34,67 €28,65
 
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
8%
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17...
€62,98 €52,05 €57,94 €47,89
 
Flame glow plug 12 V, 12,5 A, thread 7/8" - 3/8" UNF Case IH
Flame glow plug 12 V, 12,5 A, thread 7/8" - 3/8" UNF Case IH
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF.
€33,85 €27,98
 
V-belt set Case IH XPZ1800, CX 70-100, MX 80C-90C
8%
V-belt set Case IH XPZ1800, CX 70-100, MX 80C-90C
€41,46 €34,26 €38,14 €31,52
 
Oil sump gasket 210 x 600 x 2 mm engine Perkins 4.212
Oil sump gasket 210 x 600 x 2 mm engine Perkins 4.212
Dimensions: 210 x 600 x 2 mm.
€8,35 €6,90
 
Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
8%
Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, ...
€40,18 €33,21 €36,97 €30,55
 
Gas strut roof window 160 N, 225 mm, stroke 65 mm John Deere, Case IH
Gas strut roof window 160 N, 225 mm, stroke 65 mm John Deere, Case IH
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D: 6 mm. d1...
€33,61 €27,78
 
Mirror 145 x 195 mm Case IH, New Holland
8%
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
 
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
23%
ROCKINGER
Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.122,48 €927,67 €864,85 €714,76
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
23%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000...
€1.504,05 €1.243,02 €1.158,85 €957,72
 
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.431,83 €1.183,33 €1.103,20 €911,74
 
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
21%
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
 
HD-telescopic mirror bracket left Ø 19 mm, 420 - 665 mm Case IH
8%
HD-telescopic mirror bracket left Ø 19 mm, 420 - 665 mm Case IH
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location: Left.
€143,36 €118,48 €131,89 €109,00
 
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Glass kit BOND 120 black - 310 ml cartridge
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesi...
€29,49 €24,37
 
Rotary switch windshield wiper, without knob, with connector
8%
Rotary switch windshield wiper, without knob, with connector
Version: For windscreen wipers, With cable and connecting plug.
€538,10 €444,71 €495,05 €409,13
 
HELLA Rear light 170 x 75 x 64 mm, hole spacing 70 mm, M5, 12 / 24 V
4%
HELLA
Rear light 170 x 75 x 64 mm, hole spacing 70 mm, M5, 12 / 24 V
Bulb: P21/5W, P21W. Colour: Red/yellow. Connection: Blade terminal. Width: 170 m...
€32,77 €27,08 €31,55 €26,08
 
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Air filter C17337/2, AF25557, inner CF990/2
Suitable secondary element 565CF990.2
€44,60 €36,86
 
Maintenance switch koelvloeistofpeil Case IH CX 50 - MX 170 Maxxum
8%
Maintenance switch koelvloeistofpeil Case IH CX 50 - MX 170 Maxxum
Version: For coolant level Connection cable with plug
€204,29 €168,83 €187,95 €155,33
 
Clutch plate single clutch 35 x 41 mm, 10 splines Case IH
8%
Clutch plate single clutch 35 x 41 mm, 10 splines Case IH
Additional information: Made in Germany | Dimensions (mm): 35 x 41 10 grooves
€377,53 €312,01 €347,33 €287,05
 
MAHLE Alternator 14 V, 65 A, pulley-Ø 75 mm Case IH, McCormick
40%
MAHLE
Alternator 14 V, 65 A, pulley-Ø 75 mm Case IH, McCormick
Nominal voltage (V): 14 | Direction of rotation: ↻ | Form: A | Belt width (mm) /...
€395,61 €326,95 €236,95 €195,83
 
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, mounting angle l 40
40%
MAHLE
Starter motor with reduction 12 V, 4,2 kW, 10 teeth, mounting angle l 40
€416,25 €344,01 €249,31 €206,04
 
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
8%
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
€126,20 €104,30 €116,10 €95,95
 
Potentiometer Carraro front axle 145109
8%
Potentiometer Carraro front axle 145109
€257,70 €212,98 €237,08 €195,94
 
Cardan shaft bearing Case IH C 50 - C 90, CX 50 - CX 100
8%
Cardan shaft bearing Case IH C 50 - C 90, CX 50 - CX 100
€233,33 €192,83 €214,66 €177,41
 
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
8%
Carraro
Pivot bush 105 x 115 x 44 mm Carraro front axle
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€62,31 €51,50 €57,33 €47,38
 
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
8%
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
€83,84 €69,29 €77,13 €63,75
 
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
Seat Maximo Professional MSG95AL/731, 530 mm
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery typ...
€2.506,09 €2.071,15
 
Inlet/outlet gasket Case IH C 70-90, CX 70-100, MX 80C-90C
8%
Inlet/outlet gasket Case IH C 70-90, CX 70-100, MX 80C-90C
€51,88 €42,88 €47,73 €39,45
 
V-belt air conditioning Case IH, Steyr
V-belt air conditioning Case IH, Steyr
Version: For air conditioning system. Description: For air conditioning system.
€19,25 €15,91
 
Thermostat Ø 54 mm, 83 °C Case IH
Thermostat Ø 54 mm, 83 °C Case IH
Ø: 54 mm. Temperature: 83 °C.
€29,73 €24,57
 
Radiator cap grommet-Ø 57 mm, height 27 mm
Radiator cap grommet-Ø 57 mm, height 27 mm
Neck Ø: 57 mm. Height: 27 mm.
€12,54 €10,36
 
Needle bearing oil pump Ø 30 x 34 x 16 mm
Needle bearing oil pump Ø 30 x 34 x 16 mm
Dimensions: Ø 30 x 34 x 16 mm.
€14,78 €12,21
 
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
Tractor seat Maximo Professional Case IH, Steyr, New Holland
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: F...
€2.553,31 €2.110,17
 
Gas strut hood 880 N, 585 mm, stroke 240 mm Case IH 6381MT, MX 90C
8%
Gas strut hood 880 N, 585 mm, stroke 240 mm Case IH 6381MT, MX 90C
Newtons: 880. A: 585 mm. B: 293 mm. C: 10 mm. D: 10 mm. Stroke: 240 mm. d1: 10 m...
€82,11 €67,86 €75,54 €62,43
 
Gas strut door 350 N, 250 mm, stroke 66 mm Case IH CX 50, MX 90C
8%
Gas strut door 350 N, 250 mm, stroke 66 mm Case IH CX 50, MX 90C
suitable for: Tür. Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. Form:...
€51,70 €42,73 €47,56 €39,31
 
Handle rear window lock Case IH, New Holland
8%
Handle rear window lock Case IH, New Holland
€72,70 €60,08 €66,88 €55,28
 
Showing 97 - 144 of 261

Case IH CX 90 parts

On a Case IH CX 90 that spends its days on loader work, the steering joints take a beating. That is a good place to start, but this page goes further, with more than 250 parts that fit this tractor from GRANIT, HELLA, ROCKINGER, MAHLE and GRAMMER.

Steering and front axle

Ball joints and axial joints cover the steering. A potentiometer receiver for the four wheel drive axle is listed as well. Before you remove a ball joint, measure the track rod or count the turns as you unscrew it. Fitting the new joint at the same position keeps the toe close to correct until you can have it aligned. Always use a new lock nut or split pin.

Cab, switches and mirrors

The cab side is well covered. There are rocker switches, for example for the front PTO, rotary switches, relays and hazard symbols for switch faces. Cab door hinges are available, and gas struts hold the side, front or rear window open. Heavy duty telescopic mirror arms complete the list.

Before you pull the plug off a rocker switch, disconnect the battery and take a photo of the back. Every wire then goes back on the right terminal.

Engine and rear linkage

For the engine there is a starter motor, O-rings and sealing rings, such as the front crankshaft seal. Oil the lip of a new crankshaft seal lightly and drive it in squarely with a suitable drift. A seal that sits crooked leaks almost at once, and a dry lip can tear on the first start. Check the shaft for a worn groove where the old lip ran. At the rear you will find drawbars and pins for the three point linkage.

Matching parts to your CX 90

Check the type plate first. The Case IH CX series includes several models that look almost identical from the outside. After that, the reference number on the old part is the best guide. On a ball joint it is often on the housing, and on a hinge it may be stamped into the metal. Use that number to confirm the details given for the part.

The other models in the CX series each have a page with the parts that fit them: Case IH CX 70, Case IH CX 80 and Case IH CX 100. That saves time if you run more than one CX. All remaining models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart