Menu
EUR

Case IH CX 90 tractor parts & technical data

Keep your Case IH CX 90 from the CX series running with more than 250 matching parts on this page, among them electrics, trailer couplings and lighting.

261 parts found for Case IH CX 90
Show:
Evaporator block type #8/10 O-ring Case IH CX 50 - MX 170 Maxxum
Male thread: #8/10 O-Ring | Equipment: Block Type More
Male thread: #8/10 O-Ring | Equipment: Block Type
€1.190,49 €983,88 €1.095,25 €905,17
You save 8%
Start safety switch PTO M16 x 2 Case IH
Version: PTO shaft (contact function) Thread: M16 x 2 With plug connection More
Version: PTO shaft (contact function) Thread: M16 x 2 With plug connec...
€116,18 €96,01
Axial joint 175 mm, M20 x 1,5, M18 x 1,5, 32 °
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °. More
A: 175 mm. C: M20 x 1,5 mm. D: M18 x 1,5 mm. F: 32 °.
€37,68 €31,14 €34,67 €28,65
You save 8%
Ball joint 382 mm, M14 x 1,5, 20,5 mm, taper 15,6 - 17,9 mm
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper: 15,6 - 17,9 mm. More
A: 382 mm. C: M14 x 1,5 mm. D: 20,5 mm. E: 15,6 mm. F: 17,9 mm. Taper:...
€62,98 €52,05 €57,94 €47,89
You save 8%
Flame glow plug 12 V, 12,5 A, thread 7/8" - 3/8" UNF Case IH
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF. More
Version: 12 V, 12.5 A, thread 7/8" - 3/8" UNF.
€33,85 €27,98
V-belt set Case IH XPZ1800, CX 70-100, MX 80C-90C
€41,46 €34,26 €38,14 €31,52
You save 8%
Oil sump gasket 210 x 600 x 2 mm engine Perkins 4.212
Dimensions: 210 x 600 x 2 mm. More
Dimensions: 210 x 600 x 2 mm.
€8,35 €6,90
Feed pump including gasket 4 bores, hole spacing 25 x 44 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 44 mm, Flange to lever end: 34 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€40,18 €33,21 €36,97 €30,55
You save 8%
Gas strut roof window 160 N, 225 mm, stroke 65 mm John Deere, Case IH
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D: 6 mm. d1: 6 mm. d2: 15 mm. Stroke: 65 mm. Connection 1: AUGE metal. Connection... More
suitable for: Dachluke. Newtons: 160. A: 225 mm. B: 125 mm. C: 6 mm. D...
€33,61 €27,78
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.122,48 €927,67 €864,85 €714,76
You save 23%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.431,83 €1.183,33 €1.103,20 €911,74
You save 23%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.820,72 €1.504,73 €1.439,48 €1.189,65
You save 21%
HD-telescopic mirror bracket left Ø 19 mm, 420 - 665 mm Case IH
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location: Left. More
Ø: 19 mm. Length: 420 mm. Length max.: 665 mm. Installation location:...
€143,36 €118,48 €131,89 €109,00
You save 8%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Rotary switch windshield wiper, without knob, with connector
Version: For windscreen wipers, With cable and connecting plug. More
Version: For windscreen wipers, With cable and connecting plug.
€538,10 €444,71 €495,05 €409,13
You save 8%
HELLA Rear light 170 x 75 x 64 mm, hole spacing 70 mm, M5, 12 / 24 V
HELLA
Bulb: P21/5W, P21W. Colour: Red/yellow. Connection: Blade terminal. Width: 170 mm. Form: Rectangular. Height: 75 mm. Hole spacing: 70 mm. Material: Le... More
Bulb: P21/5W, P21W. Colour: Red/yellow. Connection: Blade terminal. Wi...
€32,77 €27,08 €31,55 €26,08
You save 4%
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Suitable secondary element 565CF990.2 More
Suitable secondary element 565CF990.2
€44,60 €36,86
Maintenance switch koelvloeistofpeil Case IH CX 50 - MX 170 Maxxum
Version: For coolant level Connection cable with plug More
Version: For coolant level Connection cable with plug
€204,29 €168,83 €187,95 €155,33
You save 8%
Clutch plate single clutch 35 x 41 mm, 10 splines Case IH
Additional information: Made in Germany | Dimensions (mm): 35 x 41 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 35 x 41 10 ...
€377,53 €312,01 €347,33 €287,05
You save 8%
MAHLE Alternator 14 V, 65 A, pulley-Ø 75 mm Case IH, McCormick
MAHLE
Nominal voltage (V): 14 | Direction of rotation: ↻ | Form: A | Belt width (mm) / type: (2x) 9,7 | Charging current (A): 65 | Mounting L / d / R (mm)... More
Nominal voltage (V): 14 | Direction of rotation: ↻ | Form: A | Belt ...
€395,61 €326,95 €236,95 €195,83
You save 40%
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, mounting angle l 40
€416,25 €344,01 €249,31 €206,04
You save 40%
Bearing pin front axle Ø 50 mm, Ø 35 mm, 63,5 mm, hole spacing 65 mm
Ball joint with axial joint 315 mm, M18 x 1,5, taper 19,9 - 22,25 mm
€126,20 €104,30 €116,10 €95,95
You save 8%
Potentiometer Carraro front axle 145109
€257,70 €212,98 €237,08 €195,94
You save 8%
Cardan shaft bearing Case IH C 50 - C 90, CX 50 - CX 100
€233,33 €192,83 €214,66 €177,41
You save 8%
Carraro Pivot bush 105 x 115 x 44 mm Carraro front axle
Carraro
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm. More
Outer Ø: 115 mm. Inner Ø: 105 mm. Length: 44 mm.
€62,31 €51,50 €57,33 €47,38
You save 8%
Reservoir Case IH Maxxum 5120-5250, CX 50-100, MX 80C-135
€83,84 €69,29 €77,13 €63,75
You save 8%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.506,09 €2.071,15
Inlet/outlet gasket Case IH C 70-90, CX 70-100, MX 80C-90C
€51,88 €42,88 €47,73 €39,45
You save 8%
V-belt air conditioning Case IH, Steyr
Version: For air conditioning system. Description: For air conditioning system. More
Version: For air conditioning system. Description: For air conditionin...
€19,25 €15,91
Thermostat Ø 54 mm, 83 °C Case IH
Ø: 54 mm. Temperature: 83 °C. More
Ø: 54 mm. Temperature: 83 °C.
€29,73 €24,57
Radiator cap grommet-Ø 57 mm, height 27 mm
Neck Ø: 57 mm. Height: 27 mm. More
Neck Ø: 57 mm. Height: 27 mm.
€12,54 €10,36
Needle bearing oil pump Ø 30 x 34 x 16 mm
Dimensions: Ø 30 x 34 x 16 mm. More
Dimensions: Ø 30 x 34 x 16 mm.
€14,78 €12,21
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.553,31 €2.110,17
Gas strut hood 880 N, 585 mm, stroke 240 mm Case IH 6381MT, MX 90C
Newtons: 880. A: 585 mm. B: 293 mm. C: 10 mm. D: 10 mm. Stroke: 240 mm. d1: 10 mm. d2: 22 mm. To fit: Bonnet. Form: 6. More
Newtons: 880. A: 585 mm. B: 293 mm. C: 10 mm. D: 10 mm. Stroke: 240 mm...
€82,11 €67,86 €75,54 €62,43
You save 8%
Gas strut door 350 N, 250 mm, stroke 66 mm Case IH CX 50, MX 90C
suitable for: Tür. Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 66 mm. To fit: Door. More
suitable for: Tür. Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 1...
€51,70 €42,73 €47,56 €39,31
You save 8%
Handle rear window lock Case IH, New Holland
€72,70 €60,08 €66,88 €55,28
You save 8%
Showing 97 - 144 of 261

Case IH CX 90 parts

On a Case IH CX 90 that spends its days on loader work, the steering joints take a beating. That is a good place to start, but this page goes further, with more than 250 parts that fit this tractor from GRANIT, HELLA, ROCKINGER, MAHLE and GRAMMER.

Steering and front axle

Ball joints and axial joints cover the steering. A potentiometer receiver for the four wheel drive axle is listed as well. Before you remove a ball joint, measure the track rod or count the turns as you unscrew it. Fitting the new joint at the same position keeps the toe close to correct until you can have it aligned. Always use a new lock nut or split pin.

Cab, switches and mirrors

The cab side is well covered. There are rocker switches, for example for the front PTO, rotary switches, relays and hazard symbols for switch faces. Cab door hinges are available, and gas struts hold the side, front or rear window open. Heavy duty telescopic mirror arms complete the list.

Before you pull the plug off a rocker switch, disconnect the battery and take a photo of the back. Every wire then goes back on the right terminal.

Engine and rear linkage

For the engine there is a starter motor, O-rings and sealing rings, such as the front crankshaft seal. Oil the lip of a new crankshaft seal lightly and drive it in squarely with a suitable drift. A seal that sits crooked leaks almost at once, and a dry lip can tear on the first start. Check the shaft for a worn groove where the old lip ran. At the rear you will find drawbars and pins for the three point linkage.

Matching parts to your CX 90

Check the type plate first. The Case IH CX series includes several models that look almost identical from the outside. After that, the reference number on the old part is the best guide. On a ball joint it is often on the housing, and on a hinge it may be stamped into the metal. Use that number to confirm the details given for the part.

The other models in the CX series each have a page with the parts that fit them: Case IH CX 70, Case IH CX 80 and Case IH CX 100. That saves time if you run more than one CX. All remaining models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart