Menu
EUR

Case IH JX 100U tractor parts & technical data

The Case IH JX 100U from the JXU series has more than 200 matching parts here, many of them trailer couplings, lighting or parts for brakes and transmission.

223 parts found for Case IH JX 100U
Show:
LUK Clutch plate 310UKF 22 x 25 mm, 10 splines, organic rigid
LUK
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Organic...
€119,17 €98,49 €109,64 €90,61
You save 8%
Clutch plate 310 torsion damper, sintered, 40 x 45 mm, 16 splines
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Sinter...
€223,08 €184,36 €205,23 €169,61
You save 8%
Single clutch 310 Case IH, Fiat, Ford, New Holland
Additional information: Made in Germany More
Additional information: Made in Germany
€313,34 €258,96 €288,27 €238,24
You save 8%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Brake light switch oil pressure thread 1/8 NPT, with plug connection
Version: Thread 1/8" NPT, With plug connection. More
Version: Thread 1/8" NPT, With plug connection.
€61,86 €51,12 €56,91 €47,03
You save 8%
Alternator 14 V / 33 A, form A, flange 73,5 mm, pulley-Ø 80,0 mm
To fit as: Antonio Carraro, Fiat, Lamborghini More
To fit as: Antonio Carraro, Fiat, Lamborghini
€192,68 €159,24 €177,27 €146,50
You save 8%
Alternator 14 V / 65 A, form A, flange 67,0 mm
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey Ferguson, New Holland, Same More
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey ...
€212,68 €175,77 €195,67 €161,71
You save 8%
Mirror unheated 236 x 180 mm, rod Ø 16 - 20 mm
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65-88, 70-88, 80-88, 60-90, 65-90, 70-90, 80-90, 90-90, 100-90, 110-90, 115-90, 13... More
Tractor type: Fiat 55-66, 60-66, 65-66, 70-66, 80-66, 55-88, 60-88, 65...
€27,60 €22,81
Eaton Gear wheel transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5131169 More
Reference no.: 5131169
€264,65 €218,72 €243,48 €201,22
You save 8%
Aircon compressor 12 V, Ø 134 mm, 2 grooves, 135 ccm
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil quantity (ccm): 135 | Nominal voltage (V): 12 | Refrigerant: R 134a | Fixing: EM More
Suitable oil: PAG 46 | Pulley Ø (mm): 134 | No. of grooves: 2 | Oil q...
€514,14 €424,91 €473,01 €390,92
You save 8%
LUK Single clutch 310TBFR Case IH, Fiat, Ford, New Holland
€395,47 €326,83 €363,83 €300,69
You save 8%
Clutch plate 310, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Additional information: Made in...
€91,57 €75,68 €84,24 €69,62
You save 8%
MAHLE Alternator 14 V, 45 A, pulley Ø 90 mm, flange 70 mm
MAHLE
Nominal voltage (V): 14 | Mounting L / d / R (mm): 70,0 / 12,2 / 85,0 | Belt width (mm) / type: 9,7 | Direction of rotation: ↻ | Nominal values (V /... More
Nominal voltage (V): 14 | Mounting L / d / R (mm): 70,0 / 12,2 / 85,0 ...
€278,50 €230,17 €166,80 €137,85
You save 40%
Alternator 14 V / 55 A, pulley-Ø 82 mm, flange 72 mm
Additional information: Connections: B+ (M6), D+ (M5) | Installation angle (°): 0 | Flange size (mm): 72,0 | Belt width (mm) / type: 9,7 | Pulley spa... More
Additional information: Connections: B+ (M6), D+ (M5) | Installation a...
€181,53 €150,02 €167,01 €138,02
You save 8%
Eaton Gear wheel transmission 1,72 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125005 More
Reference no.: 5125005
€189,02 €156,21 €173,90 €143,72
You save 8%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
GRAMMER Tractor seat Compacto Basic W MSG83/721 mechanical suspension, PVC
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 480 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€927,77 €766,75 €853,55 €705,41
You save 8%
Rocker switch EHR built-in rear on the fender
Version: Mounting: on the rear mudguard. More
Version: Mounting: on the rear mudguard.
€38,57 €31,88 €35,48 €29,33
You save 8%
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€37,63 €31,10
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
CARLISLE Internal plate PTO clutch 1,8 mm, 98 - 133 mm
CARLISLE
Version: thickness = 1,8 mm inner = 98 mm outer = 133 mm More
Version: thickness = 1,8 mm inner = 98 mm outer = 133 mm
€39,44 €32,60 €36,28 €29,99
You save 8%
SANDEN Aircon compressor 12 V, Ø 132 mm, 2 grooves, 175 ccm
SANDEN
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: SP 20 | Refrigerant: R 134a | Nominal voltage (V): 12 | Oil quantity (ccm): 175 More
Fixing: EM | Pulley Ø (mm): 132 | No. of grooves: 2 | Suitable oil: S...
€553,03 €457,05 €508,79 €420,49
You save 8%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
You save 8%
LUK Clutch plate 310TDCA 40 x 45 mm, 16 splines, sintered
LUK
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 40 x 45 16 grooves | Material specifications: Sintere...
€280,86 €232,12 €258,39 €213,55
You save 8%
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, 135 ccm oil, V/TO
MAHLE
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing: EM | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Oil quantity (ccm): 135 |... More
Pulley Ø (mm): 132 | Refrigerant: R 134a | Connection: V/TO | Fixing:...
€496,43 €410,27 €297,33 €245,73
You save 40%
Thrust bearing driving clutch complete Case IH, Fiat, Ford, New Holland
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
You save 8%
MAHLE Alternator 14 V, 55 A, flange 70 mm, pulley Ø 80 mm
MAHLE
Direction of rotation: ↻ | Belt width (mm) / type: 9,7 | Charging current (A): 55 | Pulley spacing (mm): 49,0 | Installation angle (°): 0 | Form: A... More
Direction of rotation: ↻ | Belt width (mm) / type: 9,7 | Charging cu...
€250,10 €206,69 €149,80 €123,80
You save 40%
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm engine 8045
€73,26 €60,55 €67,40 €55,70
You save 8%
FEBI Alternator 14 V / 65 A, form A, flange 67,0 mm
FEBI
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey Ferguson, New Holland, Same More
To fit as: Case IH, Deutz-Fahr, Ford, Hürlimann, Lamborghini, Massey ...
€335,09 €276,93 €255,72 €211,34
You save 24%
Seal kit
€50,30 €41,57 €46,28 €38,24
You save 8%
Seal kit
€54,95 €45,41
Ball joint 888 mm, M16 x 1,5, 23,8 mm, taper 18,2 - 20,5 mm
A: 888 mm. C: M16 x 1,5 mm. D: 23,8 mm. E: 18,2 mm. F: 20,5 mm. Taper: 18,2 - 20,5 mm. More
A: 888 mm. C: M16 x 1,5 mm. D: 23,8 mm. E: 18,2 mm. F: 20,5 mm. Taper:...
€158,22 €130,76 €145,56 €120,30
You save 8%
Tank cap Case IH JX series, New Holland TN series
€65,64 €54,25 €60,39 €49,91
You save 8%
Water pump with gasket Ford, Case IH, Fiat, New Holland
Reference no.: S.59032. More
Reference no.: S.59032.
€135,43 €111,93 €124,60 €102,97
You save 8%
Glow plug 12 V, thread 1/2 inch BSP
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€26,85 €22,19
Feed pump Case IH, New Holland engine 8035
€42,93 €35,48 €39,50 €32,64
You save 8%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, fabric, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.125,64 €930,28 €1.035,59 €855,86
You save 8%
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€50,42 €41,67 €46,39 €38,34
You save 8%
Stabilizer 405 - 510 mm, eye-Ø 19 mm, thread 42 x 4 mm
Eye Ø: 19 mm. C sleeve length: 318 mm. Thread: 42 x 4 mm. Length min./max.: 405 - 510 mm. More
Eye Ø: 19 mm. C sleeve length: 318 mm. Thread: 42 x 4 mm. Length min....
€166,92 €137,95 €153,57 €126,91
You save 8%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Colour: Black. Description: This product is a b... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.152,79 €1.779,17 €1.702,02 €1.406,63
You save 21%
Rear light right 199 x 85 x 145 mm, 12 V
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rectangular, short sides rounded. Height: 85 mm. Dimensions W x H x D: 199 x 85 x 1... More
Bulb: 12V21WK / P21W, 12V21 / 5WK / P21 / 5W. Width: 199 mm. Form: Rec...
€55,71 €46,04 €51,25 €42,36
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€47,55 €39,30 €43,75 €36,15
You save 8%
Double clutch DuT 310 organic, 40 x 45 mm, 16 splines
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 40 x 45, 16 grooves | Material specifications: Organi...
€771,79 €637,84 €760,05 €628,14
You save 2%
Door contact switch 12 V / 24 V, continuous load 2 A
Version: 12 V / 24 V continuous load 2 A More
Version: 12 V / 24 V continuous load 2 A
€37,25 €30,79
Showing 49 - 96 of 223

Case IH JX 100U parts

Clutch slipping under load, a whine as soon as you press the pedal, an air conditioning system that no longer cools the cab. These are the jobs that bring most owners of a JX 100U to the workshop, and the parts for them are on this page. In total there are more than 200 parts that fit the Case IH JX 100U, supplied by GRANIT, Eaton, LUK, MAHLE and ROCKINGER.

Parts by area

  • Clutch: single clutch pressure plates, clutch plates and thrust bearings
  • Engine: thermostat gaskets, piston sealing rings, cylinder head gaskets and gear wheels
  • Air conditioning and charging: aircon compressor, the matching V-belt and alternators
  • Body and cab: rear lights, gas struts for the rear window, tank caps and seats
  • Hitching: drawbars

Doing the clutch once and properly

Splitting a tractor is the expensive part of a clutch job, so replace the pressure plate, clutch plate and thrust bearing together while it is apart. Look at the flywheel face too. Scoring or blue heat marks mean it needs skimming, or the new plate will glaze and wear quickly. The clutch plate usually has the flywheel side marked on the hub, so check that before you line it up.

An aircon compressor swap has its own rule. The system must be evacuated and recharged afterwards, and the receiver drier should be replaced at the same time, because it absorbs moisture as soon as the circuit is opened.

The tank cap is easy to overlook. If its vent is blocked, a vacuum builds in the tank during long, heavy work and the engine starts to lose power. When the tractor only pulls properly again after you have briefly loosened the cap, a new one is the simplest fix. While the thermostat housing is open for a new gasket, take a look at the thermostat itself. An engine that stays cold for a long time or runs hot is a good reason to renew both at once.

Confirming the fit

The JX 100U belongs to the JXU series from Case IH. Tractors in this range look much alike from the outside, so check the type plate before you order. If you still have the old part, look for a reference number on the housing or the rim. For gaskets and clutch plates that is often the quickest way to the right item.

Other tractors in this series have their own pages, handy if your yard has more than one of them:

The JX 80U and JXU 115 are part of the same family as well. For every other model the brand makes, start from the Case IH parts overview and choose your type there.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart