Menu
EUR

Case IH JX 80 tractor parts & technical data

Servicing your Case IH JX 80? Choose from more than 180 parts for this JX series tractor, including brakes and transmission, electrics and trailer couplings.

188 parts found for Case IH JX 80
Show:
Cobo Starter switch without key, 12 V, blade terminal, Ø 40 mm
Cobo
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Housing Ø 40 mm, Key 2271410918 + 22714126200. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€59,75 €49,38 €56,75 €46,90
You save 5%
GRANIT Preheating relay 12 volt with plug connection
GRANIT
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€171,65 €141,86 €155,30 €128,35
You save 10%
MANN-FILTER Secondary air filter CF990/2, main filter C17337/2
MANN-FILTER
Suitable main filter 565C17337.2 More
Suitable main filter 565C17337.2
€36,00 €29,75
Work lamp angular H3, 12 V, 55 W Case IH, New Holland
Bulbs included: - | Form: Square | Power consumption (W): 55 | Nominal voltage (V): 12 | Bulb: H3 More
Bulbs included: - | Form: Square | Power consumption (W): 55 | Nominal...
€224,00 €185,12
LUK Single clutch 280, 35 x 40, 14 splines Case IH, New Holland, Steyr
LUK
Dimensions (mm): 35 x 40 14 grooves More
Dimensions (mm): 35 x 40 14 grooves
€734,83 €607,30 €698,00 €576,86
You save 5%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.114,70 €921,24
Eaton Driven gear wheel transmission
Eaton
Reference no.: 5169606 More
Reference no.: 5169606
€131,04 €108,30 €124,45 €102,85
You save 5%
GRANIT Clutch cable PTO clutch 1190 mm, sleeve 1000 mm, M6
GRANIT
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000 More
Cable length (mm): 1190 | Thread: M6 | Sleeve length (mm): 1000
€127,45 €105,33 €121,00 €100,00
You save 5%
CARLISLE External plate PTO clutch 2,2 mm, inner 98 mm, outer 152 mm
CARLISLE
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm More
Version: Thickness: 2.2 mm Inner: 98 mm Outer: 152 mm
€10,32 €8,53 €9,80 €8,10
You save 5%
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€85,00 €70,25 €80,75 €66,74
You save 5%
GRANIT Clutch plate 280 22 x 25, 10 splines
GRANIT
Additional information: Made in Germany | Dimensions (mm): 22 x 25, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 22 x 25, 10...
€105,06 €86,83 €99,80 €82,48
You save 5%
GRANIT Clutch plate 280 sintered, 22 x 25 mm, 10 splines
GRANIT
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sinter...
€124,64 €103,01 €118,40 €97,85
You save 5%
GRANIT Clutch plate single clutch 35 x 40 mm, 14 splines
GRANIT
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14 grooves More
Additional information: Made in Germany | Dimensions (mm): 35 x 40, 14...
€406,80 €336,20 €386,45 €319,38
You save 5%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nominal voltage (V): 14 | Flange size (mm): 83,0 | Mounting hole Ø / R (... More
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 /...
€164,55 €135,99 €156,30 €129,17
You save 5%
GRANIT Link symbol range shift 3 gears
Eaton Drive pinion transmission 1,37 kg
Eaton
Reference no.: 5179673 More
Reference no.: 5179673
€218,77 €180,80 €207,80 €171,74
You save 5%
Eaton Main shaft transmission Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5161817 More
Reference no.: 5161817
€415,03 €343,00 €394,25 €325,83
You save 5%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€57,56 €47,57 €54,65 €45,17
You save 5%
GRANIT Ball joint 1515 mm, M18 x 1,5, taper 20 - 22 mm, line-Ø 34 mm
GRANIT
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. Tube Ø: 34 mm. More
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Tape...
€113,91 €94,14 €108,20 €89,42
You save 5%
Thrust washer Ø 171,1 x 94,3 mm, thickness 2,65 mm
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm. More
Thickness: 2,65 mm. Outer Ø: 171,1 mm. Inner Ø: 94,3 mm.
€22,60 €18,68
Bowden cable 658 mm Case IH, New Holland
€14,10 €11,65
Borg Warner Cooling fan electric Ø 450 mm, thread M24 x 1,5 L
Borg Warner
Ø: 450 mm. Thread: M24 x 1.5 L. More
Ø: 450 mm. Thread: M24 x 1.5 L.
€406,75 €336,16 €357,00 €295,04
You save 12%
Borg Warner Cooling fan Ø 450 mm New Holland, Steyr, Case IH
€250,95 €207,40 €220,25 €182,02
You save 12%
Sealing ring water pump Ø 98,59 x 88,27 x 5,16 mm Case IH, New Holland
Ø: 98.59 x 88.27 x 5.16 mm. More
Ø: 98.59 x 88.27 x 5.16 mm.
€4,24 €3,50
Showing 121 - 144 of 188

Case IH JX 80 parts

A Case IH JX 80 that spends its days on loader work and yard jobs puts its clutch through more than any field work would. Constant pulling away, stopping and turning takes its toll on the plate, the pressure assembly and the thrust bearing. More than 180 parts for this tractor are listed on this page, from GRANIT and from manufacturers such as ROCKINGER, LUK, Eaton and GRAMMER.

Clutch work on the JX 80

The driveline section covers clutch plates, double clutch pressure assemblies, complete clutch kits for the twin plate clutch and thrust bearings for the driving clutch. The kits come without a thrust bearing, so pick that one separately.

Once the tractor is split, the thrust bearing should always be renewed. Check the flywheel face too. Heat cracks or deep scoring will wear a new plate quickly. A clutch that judders when pulling away often has oil on the lining, and then the leaking seal belongs in the repair as well. Any worn gear wheel found while the halves are apart is worth replacing at the same time.

Steering

For the front end there are ball joints, track rods and steering cylinders. Play in the steering usually shows on the road first, when you keep correcting to hold a straight line. Have someone rock the steering wheel while you watch each joint at the wheels to spot the one that moves. A steering cylinder weeping oil along its rod should not wait long either, because dirt sticking to the wet rod works its way into the seal.

Hitch, cab and cooling

  • Automatic drawbars and Piton Fix rails.
  • Compacto seats and gas struts for the rear window.
  • Radiator caps, sealing rings and seals.

A radiator cap with a hardened or cracked seal no longer holds pressure, so the engine boils sooner than it should. Only open it with the engine cold.

Identifying the correct part

The JX 80 is part of the Case IH JX series. Check the model on the type plate and take the reference number from the old part. For clutch plates, count the hub splines as well, and for ball joints note the side and the thread.

Other tractors in the JX series each have their own page:

Every other model of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart