Menu
EUR

Case IH JX 80 tractor parts & technical data

Servicing your Case IH JX 80? Choose from more than 180 parts for this JX series tractor, including brakes and transmission, electrics and trailer couplings.

188 parts found for Case IH JX 80
Show:
Oil pressure switch transmission differential, 2 blade terminals
Version: Transmission, (hydraulics) differential, 2 blade terminals. More
Version: Transmission, (hydraulics) differential, 2 blade terminals.
€139,76 €115,50 €126,40 €104,46
You save 10%
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Suitable secondary element 565CF990.2 More
Suitable secondary element 565CF990.2
€42,70 €35,29
GRANIT Internal plate differential catch 2,8 mm, 44 - 71,7 mm, 22 teeth
GRANIT
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 2.8 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€15,35 €12,69
GRANIT Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
GRANIT
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,20 €11,74
GRANIT External plate differential catch 1,5 mm, inner 49,2 mm, outer 85 mm
GRANIT
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth More
Version: Thickness: 1.5 mm Inner: 49.2 mm Outer: 85 mm 4 teeth
€7,80 €6,45
LUK Clutch 310/310TGU6 41 x 45 mm, 16 splines sintered, chain pitch 29 mm
LUK
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 41 x 45 16 grooves | Material specifications: Sintere...
€1.345,98 €1.112,38 €1.278,65 €1.056,74
You save 5%
GRANIT Double clutch DuT 280 organic, 35 x 40, 327 mm
GRANIT
Dimensions (mm): 35 x 40 14 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 35 x 40 14 grooves | Material specifications: Organic...
€920,81 €761,00 €874,75 €722,93
You save 5%
GRANIT Double clutch DuT 310, 40 x 45 mm, 16 splines Case IH, New Holland
GRANIT
Additional information: Made in Germany | Dimensions (mm): 40 x 45, 16 grooves More
Additional information: Made in Germany | Dimensions (mm): 40 x 45, 16...
€775,08 €640,56 €736,30 €608,51
You save 5%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€29,15 €24,09
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
MAHLE
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 120 | Direction of rotation: ↻ | Charging current (A): 120 | ... More
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal valu...
€518,09 €428,17 €323,75 €267,56
You save 38%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€34,65 €28,64
Steering cylinder eye-Ø 25 mm, length 384 mm, stroke 230 mm
Technical data: Length: 384 mm Eye Ø: 25 mm Stroke: 230 mm. More
Technical data: Length: 384 mm Eye Ø: 25 mm Stroke: 230 mm.
€446,65 €369,13 €424,30 €350,66
You save 5%
PTO shaft end piece 1 3/8 inch 6 splines Case IH, Steyr, New Holland
€172,26 €142,36 €163,60 €135,21
You save 5%
GRANIT As PTO input Case IH, New Holland
€145,44 €120,20 €138,15 €114,17
You save 5%
MAHLE Radiator 460 x 539 x 62 mm Case IH, New Holland
MAHLE
To fit as: Case IH Series JX: 60, 70, 80, 90, 95; New Holland Series TD5000: 5010, 5020, 5030, 5040, 5050 More
To fit as: Case IH Series JX: 60, 70, 80, 90, 95; New Holland Series T...
€623,15 €515,00 €389,45 €321,86
You save 38%
GRANIT Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,30 €11,82
Gas strut steering 420 N, 252 mm, stroke 46 mm
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. Stroke: 46 mm. To fit: Steering. Reference no.: 87732038. More
suitable for: Lenkung. Newtons: 420. A: 252 mm. d1: 10 mm. d2: 28 mm. ...
€42,22 €34,89 €40,10 €33,14
You save 5%
Hydraulic pump single 19,2 cm³/rpm. anticlockwise, taper 1:8
Output volume: 19,2 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 59,1 mm. B: 117,9 mm. Direction of rotation: Anticlockwise. Line connection suction s... More
Output volume: 19,2 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. A: 59,1 ...
€254,10 €210,00 €241,35 €199,46
You save 5%
Lift arm 970 mm, eye-Ø 26 / 28 mm Fiat, New Holland, Case IH
Eye Ø: 26 / 28 mm. Length: 970 mm. More
Eye Ø: 26 / 28 mm. Length: 970 mm.
€213,44 €176,40 €202,75 €167,56
You save 5%
Gas strut rear window 350 N, 460 mm
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear screen. Form: 2. More
Newtons: 350. A: 460 mm. B: 245 mm. C: 8 mm. D: 8 mm. To fit: rear scr...
€29,20 €24,13
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
GRANIT Tank sender 12 volt
€136,49 €112,80 €129,65 €107,15
You save 5%
Showing 97 - 120 of 188

Case IH JX 80 parts

A Case IH JX 80 that spends its days on loader work and yard jobs puts its clutch through more than any field work would. Constant pulling away, stopping and turning takes its toll on the plate, the pressure assembly and the thrust bearing. More than 180 parts for this tractor are listed on this page, from GRANIT and from manufacturers such as ROCKINGER, LUK, Eaton and GRAMMER.

Clutch work on the JX 80

The driveline section covers clutch plates, double clutch pressure assemblies, complete clutch kits for the twin plate clutch and thrust bearings for the driving clutch. The kits come without a thrust bearing, so pick that one separately.

Once the tractor is split, the thrust bearing should always be renewed. Check the flywheel face too. Heat cracks or deep scoring will wear a new plate quickly. A clutch that judders when pulling away often has oil on the lining, and then the leaking seal belongs in the repair as well. Any worn gear wheel found while the halves are apart is worth replacing at the same time.

Steering

For the front end there are ball joints, track rods and steering cylinders. Play in the steering usually shows on the road first, when you keep correcting to hold a straight line. Have someone rock the steering wheel while you watch each joint at the wheels to spot the one that moves. A steering cylinder weeping oil along its rod should not wait long either, because dirt sticking to the wet rod works its way into the seal.

Hitch, cab and cooling

  • Automatic drawbars and Piton Fix rails.
  • Compacto seats and gas struts for the rear window.
  • Radiator caps, sealing rings and seals.

A radiator cap with a hardened or cracked seal no longer holds pressure, so the engine boils sooner than it should. Only open it with the engine cold.

Identifying the correct part

The JX 80 is part of the Case IH JX series. Check the model on the type plate and take the reference number from the old part. For clutch plates, count the hub splines as well, and for ball joints note the side and the thread.

Other tractors in the JX series each have their own page:

Every other model of the brand is listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart