Menu
EUR

Case IH JX 90 tractor parts & technical data

Everything for the Case IH JX 90 in one place: more than 200 parts that fit this model, from trailer couplings to brakes, transmission and electrics.

222 parts found for Case IH JX 90
Show:
Elring Cylinder head gasket 1,43 mm, Ø 105,5 mm engine 8045
€73,26 €60,55 €67,40 €55,70
You save 8%
FEBI Fuel feed pump Case IH Maxxum 100, 110, 115, 125, 140, JX 90
FEBI
Fuel feed pump Case IH Maxxum 100, 110, 115, 125, 140, JX 90 More
Fuel feed pump Case IH Maxxum 100, 110, 115, 125, 140, JX 90
€82,28 €68,00 €63,03 €52,09
You save 23%
Seal kit
€50,30 €41,57 €46,28 €38,24
You save 8%
Ball joint 1515 mm, M18 x 1,5, taper 20 - 22 mm, line-Ø 34 mm
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. Tube Ø: 34 mm. More
A: 1515 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Tape...
€118,86 €98,23 €109,35 €90,37
You save 8%
Handle for rear screen Case IH, New Holland
€70,69 €58,42 €65,03 €53,75
You save 8%
Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€50,42 €41,67 €46,39 €38,34
You save 8%
Lift rod Case IH, New Holland, Fiat
€407,79 €337,02 €375,17 €310,06
You save 8%
Rear-view mirror tractor, construction machinery, forklifts
€71,09 €58,75 €65,40 €54,05
You save 8%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€910,37 €752,37 €876,79 €724,62
You save 4%
Starter switch 12 V, blade terminal, parking light, Ø 40 mm
Version: 12 V, with blade terminal, Function:, P: parking light, 0: off, 1: consumer, 2: start, Housing Ø 40 mm. More
Version: 12 V, with blade terminal, Function:, P: parking light, 0: of...
€16,52 €13,65
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.492,67 €2.060,06 €1.970,56 €1.628,56
You save 21%
SACHS Clutch plate 280 22 x 25 mm, 10 splines
SACHS
Dimensions (mm): 22 x 25, 10 grooves More
Dimensions (mm): 22 x 25, 10 grooves
€141,43 €116,88 €130,12 €107,53
You save 8%
Clutch plate 280 22 x 25, 10 splines
Additional information: Made in Germany | Dimensions (mm): 22 x 25, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 22 x 25, 10...
€109,63 €90,60 €100,86 €83,36
You save 8%
Eaton Gear wheel transmission 3,15 kg Case IH, Fiat, Ford, New Holland, Steyr
€302,40 €249,92 €278,21 €229,92
You save 8%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€60,06 €49,64 €55,26 €45,67
You save 8%
Track rod complete 1475 mm, M20 x 1, 18 - 20 mm, 35 mm
A: 1460 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 35 mm. F: 30 mm. More
A: 1460 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 35 ...
€207,58 €171,55 €190,97 €157,83
You save 8%
Track rod complete 1520 mm, M20 x 1, 18 - 20 mm, 34 mm
A: 1500 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 34 mm. F: 22,5 mm. More
A: 1500 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 34 ...
€247,62 €204,64 €227,81 €188,27
You save 8%
Steering cylinder right and left, ball eye Ø 20 mm
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€474,31 €391,99 €436,37 €360,63
You save 8%
As PTO input Case IH, New Holland
€151,77 €125,43 €139,63 €115,40
You save 8%
VICTOR REINZ Valve cover gasket Case IH, Steyr, New Holland
Thermostat gasket Case IH, Steyr, New Holland
€33,42 €27,62 €30,75 €25,41
You save 8%
Radiator Case IH JX 60-95, New Holland TD5010-TD5050
To fit as:
New Holland TD5010, TD5020, TD5030, TD5040, TD5050
Case IH JX 60 Tier 3 (12/08–12/13), JX 70, JX 80, JX 90, JX 95 Tier 3 (01/07–12/14
More
To fit as:
New Holland TD5010, TD5020, TD5030, TD5040, TD5050
Case I...
€712,58 €588,91 €655,57 €541,80
You save 8%
Exhaust pipe Case IH, New Holland
€209,69 €173,30 €192,91 €159,43
You save 8%
GRAMMER Tractor seat Compacto Basic W MSG83/721 mechanical suspension, fabric
GRAMMER
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 480 mm. Fore/aft isolator: Optional. ... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
€1.137,76 €940,30 €1.046,74 €865,07
You save 8%
GRAMMER Seat Compacto COMFORT W MSG93/721, air suspended, fabric, 482 mm
GRAMMER
Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 482 mm. Fore/aft isolator: Yes. R... More
Suspension: Air suspension. Upholstery type: Fabric. Seat contact swit...
€1.551,34 €1.282,10 €1.477,23 €1.220,85
You save 5%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.122,48 €927,67 €864,85 €714,76
You save 23%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.504,05 €1.243,02 €1.158,85 €957,72
You save 23%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.431,83 €1.183,33 €1.103,20 €911,74
You save 23%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
MANN-FILTER Air filter C17337/2, AF25557, inner CF990/2
MANN-FILTER
Suitable secondary element 565CF990.2 More
Suitable secondary element 565CF990.2
€44,60 €36,86
Ball joint taper 16,2 - 18,3 mm, length 100 mm, M14 x 1,5, M22 x 1,5 L
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 100 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm....
€71,69 €59,25 €65,95 €54,51
You save 8%
Ball joint 80 mm, 5/8" x 18, M20 x 1, taper 18 - 20,2 mm
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper:...
€40,44 €33,42
MAHLE Radiator 460 x 539 x 62 mm Case IH, New Holland
MAHLE
To fit as: Case IH Series JX: 60, 70, 80, 90, 95; New Holland Series TD5000: 5010, 5020, 5030, 5040, 5050 More
To fit as: Case IH Series JX: 60, 70, 80, 90, 95; New Holland Series T...
€650,26 €537,41 €389,47 €321,88
You save 40%
Intercooler Case IH, New Holland
€445,65 €368,31 €410,00 €338,84
You save 8%
Radiator cap grommet-Ø 57 mm, height 27 mm
Neck Ø: 57 mm. Height: 27 mm. More
Neck Ø: 57 mm. Height: 27 mm.
€12,54 €10,36
Oil drain valve thread M22 x 1,5 Fendt, New Holland, Deutz-Fahr
€14,93 €12,33
Silencer Case IH, New Holland
€178,12 €147,21 €163,87 €135,43
You save 8%
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.489,09 €1.230,65 €1.197,32 €989,52
You save 20%
Hinge for rear screen Case IH JX 55-90, New Holland TD55D, TT75
€46,97 €38,82 €43,21 €35,71
You save 8%
Brake light switch oil pressure 1/8 inch NPTF, make contact 1,0 bar
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal. More
Version: Thread 1/8" (NPTF), Make contact 1.0 bar, Blade terminal.
€79,17 €65,43 €72,84 €60,20
You save 8%
HELLA Push button switch hazard lights 12 V, button red, 9 blade terminals 6,3 mm
HELLA
Version: Push button operation, Single circuit, for vehicles with 12 V system, red pilot light with warning symbol, splashproof (according to DIN 40 0... More
Version: Push button operation, Single circuit, for vehicles with 12 V...
€32,39 €26,77 €31,20 €25,78
You save 4%
Radiator cap Ø 58 mm, height 25,5 mm Ford, Case IH, New Holland
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, 5600, 7600, 5610, 6410, 6610, 6710, 6810, 7410, 7610, 7710, 7810, 7910, 8010, 82... More
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, ...
€16,00 €13,22
Bush 99 x 104 x 52 mm Case IH
€35,73 €29,53 €32,87 €27,17
You save 8%
Showing 97 - 144 of 222

Keeping a Case IH JX 90 working: parts for lift, cab and driveline

After plenty of hours, a JX 90 rarely fails in one big way. More often it is oil dripping from the lift shaft, a rear window that drops shut on its own or steering that has picked up a little play. More than 200 parts for this tractor are collected here, made by GRANIT and by suppliers including LUK, ROCKINGER, Eaton and GRAMMER.

Lift and hydraulics

For the linkage there are lift arm shaft seals and sealing rings, among them the piston seal found in the hydraulics of several other brands too. If the lift shaft is leaking, clean the shaft thoroughly around the sealing area and check it for rust pitting or a worn groove before pressing in a new seal. Push it in square and grease the lip lightly so it does not run dry on the first few strokes.

Cab, steering and drive

A rear window that falls shut almost always has a tired gas strut. Fit the new one with the piston rod pointing down so the internal seal stays lubricated and the strut lasts longer. Push button switches for the dash, Compacto seats and radiator caps are listed as well.

At the front axle you will find ball joints and track rods. A worn track rod end does more than add play at the wheel. It also pulls the toe out of line, which shows up as front tyres wearing on one edge. After replacing one, have the toe-in set again.

  • Clutch plates and double clutch pressure assemblies for the twin plate clutch.
  • Complete clutch kits, with the thrust bearing for the driving clutch chosen separately.
  • Gear wheels for the drive.
  • Automatic drawbars and Piton Fix rails for the rear hitch.

Choosing the right part for your JX 90

The JX 90 belongs to the Case IH JX series. Use the type plate to confirm the model, then match the reference number on the old part. On a clutch plate also count the splines in the hub, and on switches check the symbol printed on the button.

Each tractor in the JX series has its own page with the parts that belong to it:

For all other models of the brand, go to Case IH parts and pick the type to reach the right page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart