Menu
EUR

Case IH Magnum 310 tractor parts & technical data

With more than 250 parts for the Case IH Magnum 310, there is no need to look far. Trailer couplings, electrics and steering parts are sorted by group.

272 parts found for Case IH Magnum 310
Show:
MAHLE Aircon compressor 12 V, Ø 152 mm, 8 grooves, Rotolock
MAHLE
Connection: Rotolock | Reference no.: ACP 1066 000S | Oil quantity (ccm): 285 | Additional information: With sealing ring | No. of grooves: 8 | Suitab... More
Connection: Rotolock | Reference no.: ACP 1066 000S | Oil quantity (cc...
€645,61 €533,56 €403,50 €333,47
You save 38%
LED work lights floodlight 3000 lm, 40 W, 9 - 32 V, 142 x 97,5 x 54 mm
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LED | No. of LEDs: 8 | Dimensions W x H x D (mm): 142 x 97,5 x 54 | Height (mm): 9... More
Effective luminous flux (lm): 3000 | Light colour (K): 6000 | Bulb: LE...
€87,94 €72,68 €83,50 €69,01
You save 5%
GRANIT Steering cylinder right hydraulic steering Case IH, New Holland
€1.357,86 €1.122,20 €1.289,95 €1.066,07
You save 5%
GRANIT Plate hand brake Ø 192 x 308 mm Case IH Magnum
GRANIT
Version: Ø 192 x 308 mm. More
Version: Ø 192 x 308 mm.
€119,31 €98,60 €113,30 €93,64
You save 5%
Radiator hose, top inner-Ø 57 mm New Holland, Case IH
€37,58 €31,06 €35,70 €29,50
You save 5%
V-belt tensioner Case IH Magnum 225-335
€225,75 €186,57 €214,45 €177,23
You save 5%
GRANIT Tank cap reservoir thread 57 mm
GRANIT
Version: Thread 57 mm, For expansion tank. More
Version: Thread 57 mm, For expansion tank.
€21,95 €18,14
GRANIT Sensor AdBlue-quality Case IH, Steyr, New Holland
GRANIT
Description: For AdBlue quality. More
Description: For AdBlue quality.
€897,00 €741,32
AdBlue injection unit DM 2.5, 7,2 kg/hr
Description: DM 2.5, 7.2 kg/hr. More
Description: DM 2.5, 7.2 kg/hr.
€381,26 €315,09 €362,15 €299,30
You save 5%
GRANIT Cylinder head bolt 14 x 160 mm Case IH
GRANIT
Dimensions: M14 x 160 mm. More
Dimensions: M14 x 160 mm.
€20,95 €17,31
GRANIT Tank cap thread Ø 83 / 90 mm, tank collar Ø 88 mm
GRANIT
Thread Ø mm: 83 / 90. Filler neck Ø: 88 mm. More
Thread Ø mm: 83 / 90. Filler neck Ø: 88 mm.
€29,50 €24,38
Injection line Case IH, New Holland Series T8-T9
€53,65 €44,34 €50,95 €42,11
You save 5%
GRANIT Injection line Case IH, New Holland Series T8-T9
€39,29 €32,47 €37,30 €30,83
You save 5%
GRANIT Injection line New Holland series T8, T9, Case IH Magnum
€51,18 €42,30 €48,60 €40,17
You save 5%
Seal pressure pipe Ø 0,103 x 0,424 inch Case IH, New Holland
Designation: For pressure pipe. More
Designation: For pressure pipe.
€10,85 €8,97
GRANIT Tank cap engine cooling thread 52 mm
GRANIT
Version: Thread: 52 mm. More
Version: Thread: 52 mm.
€34,15 €28,22
Borg Warner Fan clutch standard version Case IH, New Holland
ROCKINGER Adaptor plate rail width 390 mm, hole pattern 160 x 100 mm, M20
ROCKINGER
Load capacity: 4000 / 1000 kg. D-value: 98,1 kN. Rail width: 390 mm. Hole pattern: 160 x 100 mm. Pin Ø: 25 mm. Guide width: 32 mm. Colour: black. Des... More
Load capacity: 4000 / 1000 kg. D-value: 98,1 kN. Rail width: 390 mm. H...
€574,63 €474,90 €462,00 €381,82
You save 20%
Showing 217 - 240 of 272

Case IH Magnum 310 parts for hitch, fuel system and seat

The Magnum 310 is made for long days under heavy draught, and the parts on this page follow from that. A large share covers the rear hitch, the fuel side of the engine and the driver's seat. In total there are more than 250 parts for this tractor, made by GRANIT and by brands such as ROCKINGER, Scharmüller, Walterscheid and GRAMMER.

A hitch you can configure

On a Magnum the coupling point works like a modular system. There are automatic drawbars, Piton Fix rails and adapter plates, and each must match the rail width and the bolt hole pattern of the plate on the tractor. Measure both before you choose, and you can switch between a drawbar for the trailer and a fixed pin for a heavy load without replacing the whole assembly. Connector heads and air hoses for trailer air brakes are also listed.

Engine and fuel

The engine section includes injection lines, seal sets, the gasket for the turbocharger oil return line and seals for the feed pump. Fuel system work is all about cleanliness. Clean around a union before loosening it and cap open lines straight away. An injection line that has been bent or tightened several times should not be refitted, because the cone at its end deforms when tightened and will not seal reliably again. Check which cylinder a line belongs to as well, since each one has its own shape.

For electrics and the auxiliary drive there are alternators, multi-rib belts and relays, including changeover relays. A multi-rib belt that is fraying at the edge or shows cracks across the ribs is better replaced in the workshop than in the field.

Seat and cab

The cab section lists air suspension seats from the GRAMMER Maximo line and PROBOSS seats with seat heating, together with tank caps, among them one for the cooling system.

Ordering the right part for your Magnum 310

The Magnum 310 is part of the Case IH Magnum series. Confirm the model on the type plate first. The reference number on the old part then settles what fits.

For every other tractor of the brand, from the smaller series to other Magnum models, head to Case IH parts, choose the type shown on your type plate and you will land on the page with the matching parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart