Menu
EUR

Case IH Magnum 310 tractor parts & technical data

With more than 250 parts for the Case IH Magnum 310, there is no need to look far. Trailer couplings, electrics and steering parts are sorted by group.

272 parts found for Case IH Magnum 310
Show:
GRANIT O-ring cylinder liner Case IH
€22,70 €18,76
Oil sump gasket engine Cummins 6T-830 Case IH, New Holland
€49,50 €40,91 €47,00 €38,84
You save 5%
GRANIT Cooling fan Ø 762 mm Case IH, New Holland
€200,81 €165,96 €190,75 €157,64
You save 5%
Tank cap thread 76,6 mm
Version: Thread: 76.6 mm. More
Version: Thread: 76.6 mm.
€13,95 €11,53
Injection line New Holland series T8, T9, Case IH Magnum
€53,65 €44,34 €50,95 €42,11
You save 5%
Injection line New Holland T8, T9, Case IH Magnum, Quadtrac
Designation: For 38017301. More
Designation: For 38017301.
€54,72 €45,22 €51,95 €42,93
You save 5%
Gas strut door 280 N, 320 mm, stroke 102 mm Ford, Case IH, Fiat
suitable for: Tür. Newtons: 280. A: 320 mm. B: 160 mm. C: 13 mm. D: 13 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 102 mm. To fit: Door. More
suitable for: Tür. Newtons: 280. A: 320 mm. B: 160 mm. C: 13 mm. D: 1...
€66,10 €54,63 €62,75 €51,86
You save 5%
GRANIT Hinge cab door bottom left Case IH CX 50, SPX3320
€153,51 €126,87 €145,80 €120,50
You save 5%
Handle rear window lock Case IH, New Holland
€69,67 €57,58 €66,15 €54,67
You save 5%
Pin stabilizer Case IH, Steyr
€61,95 €51,20 €58,85 €48,64
You save 5%
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left. More
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Ri...
€16,10 €13,31
Walterscheid Drawbar complete automatic rail width 330 mm, coupling pin 37 mm
Walterscheid
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Connecti...
€1.770,23 €1.463,00 €1.460,40 €1.206,94
You save 18%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943. More
Reference no.: 47436943.
€78,26 €64,68 €74,30 €61,41
You save 5%
Pressure switch air conditioning line with union nut, connection cable and plug
Version: Connection with union nut, Connection cable and plug. More
Version: Connection with union nut, Connection cable and plug.
€130,07 €107,50 €123,55 €102,11
You save 5%
Knob black for light switch
Version: For light switch. More
Version: For light switch.
€32,60 €26,94
Cobo Relays N/O-contact 12 V / 70 A, 4-pin, 6,3 mm blade terminal
Cobo
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm. More
Version: 12 V / 70 A, with bracket, 4-pin, 2x 6.3 mm / 2x 9.5 mm.
€42,56 €35,17 €38,50 €31,82
You save 10%
GRANIT Internal plate main connection 2,9 mm, 162 - 229 mm, 39 teeth
GRANIT
Version: thickness = 2,9 mm inner = 162 mm outer = 229 mm 39 teeth More
Version: thickness = 2,9 mm inner = 162 mm outer = 229 mm 39 teeth
€36,32 €30,02 €34,50 €28,51
You save 5%
MAHLE Alternator 14 V / 175 A, flange 101 mm, with dust protection Case IH, New Holland
MAHLE
Flange size (mm): 101.0 | Mounting hole Ø / R (mm): 13.2 / 99.0 | Belt width (mm) / type: - | Form: A | Nominal values (V / A): 14 / 175 | Charging c... More
Flange size (mm): 101.0 | Mounting hole Ø / R (mm): 13.2 / 99.0 | Bel...
€968,53 €800,44 €907,95 €750,37
You save 6%
Eaton External plate transmission Case IH, New Holland
Eaton
Reference no.: 1285974C1 More
Reference no.: 1285974C1
€43,50 €35,95 €41,30 €34,13
You save 5%
Aircon compressor 12 V, pulley-Ø 152 mm, 8 grooves Case IH, New Holland
Fixing: DM | Refrigerant: R 134a | For compressor: SD7H15 | Oil quantity (ccm): 285 | Nominal voltage (V): 12 | Pulley Ø (mm): 152 | Suitable oil: PA... More
Fixing: DM | Refrigerant: R 134a | For compressor: SD7H15 | Oil quanti...
€522,05 €431,45 €495,90 €409,83
You save 5%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 238 g
Connection thread A: # 8, 1/2"" O-ring | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Weight (g): 238 More
Connection thread A: # 8, 1/2"" O-ring | Connection thread E: # 6, 3/8...
€54,78 €45,27 €52,00 €42,98
You save 5%
GRANIT Angle sensor 90°, 10 - 30 V DC, 4 - 20 mA Case IH Magnum 210 - 370
GRANIT
Version: Angle measuring range: 90° Resolution: 0.1° Operating voltage: 10 V DC to 30 V DC Output signal: 4 mA to 20 mA Power consumption: 12 V -> 1... More
Version: Angle measuring range: 90° Resolution: 0.1° Operating volta...
€203,16 €167,90 €193,00 €159,50
You save 5%
Showing 193 - 216 of 272

Case IH Magnum 310 parts for hitch, fuel system and seat

The Magnum 310 is made for long days under heavy draught, and the parts on this page follow from that. A large share covers the rear hitch, the fuel side of the engine and the driver's seat. In total there are more than 250 parts for this tractor, made by GRANIT and by brands such as ROCKINGER, Scharmüller, Walterscheid and GRAMMER.

A hitch you can configure

On a Magnum the coupling point works like a modular system. There are automatic drawbars, Piton Fix rails and adapter plates, and each must match the rail width and the bolt hole pattern of the plate on the tractor. Measure both before you choose, and you can switch between a drawbar for the trailer and a fixed pin for a heavy load without replacing the whole assembly. Connector heads and air hoses for trailer air brakes are also listed.

Engine and fuel

The engine section includes injection lines, seal sets, the gasket for the turbocharger oil return line and seals for the feed pump. Fuel system work is all about cleanliness. Clean around a union before loosening it and cap open lines straight away. An injection line that has been bent or tightened several times should not be refitted, because the cone at its end deforms when tightened and will not seal reliably again. Check which cylinder a line belongs to as well, since each one has its own shape.

For electrics and the auxiliary drive there are alternators, multi-rib belts and relays, including changeover relays. A multi-rib belt that is fraying at the edge or shows cracks across the ribs is better replaced in the workshop than in the field.

Seat and cab

The cab section lists air suspension seats from the GRAMMER Maximo line and PROBOSS seats with seat heating, together with tank caps, among them one for the cooling system.

Ordering the right part for your Magnum 310

The Magnum 310 is part of the Case IH Magnum series. Confirm the model on the type plate first. The reference number on the old part then settles what fits.

For every other tractor of the brand, from the smaller series to other Magnum models, head to Case IH parts, choose the type shown on your type plate and you will land on the page with the matching parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart