Menu
EUR

Case IH Magnum 310 tractor parts & technical data

With more than 250 parts for the Case IH Magnum 310, there is no need to look far. Trailer couplings, electrics and steering parts are sorted by group.

272 parts found for Case IH Magnum 310
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M12 x 1,5, standard open
€455,73 €376,64 €412,30 €340,74
You save 10%
GRANIT Alternator 14 V / 200 A, flange 2 x 56 mm
GRANIT
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tension hole Ø / R (mm): 10,5 / 90,0 | Form: B | Mounting hole Ø / R (mm): 10,5 / ... More
Installation angle (°): l 60 | Direction of rotation: ↻ | Belt tens...
€281,37 €232,54 €267,30 €220,91
You save 5%
BOSCH Fuel pre-filter line filter D 48 mm, H 117,5 mm, connection 6/7,2 mm
BOSCH
C (mm): 42 | H (mm): 117,5 | Additional information: Typformel: F3169 | D (mm): 48 | F: 6/7,2 | Version: Leitungsfilter | G (mm): 6/7,2 More
C (mm): 42 | H (mm): 117,5 | Additional information: Typformel: F3169 ...
€12,60 €10,41
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adjustment - Longitudinal adjustment - Backrest tilt adjustment - Mechani... More
- Air suspension with 12V compressor - Fore/aft isolator - Continuous ...
€1.742,40 €1.440,00
MAHLE Starter motor 12 V, 4,2 kW, 10 teeth clockwise, 273 mm, Ø 92 mm
€585,69 €484,04 €366,00 €302,48
You save 38%
Cylinder hydraulic steering Case IH, New Holland Series T8
€374,25 €309,30 €355,50 €293,80
You save 5%
GRANIT Ball joint left 513 mm, M22 x 1,5, M38 x 1,5 L
GRANIT
A: 513 mm. C: M22 x 1,5 mm. D: M38 x 1,5 L mm. E: 28 mm. F: 32,9 mm. Taper: 28 - 32,9 mm. More
A: 513 mm. C: M22 x 1,5 mm. D: M38 x 1,5 L mm. E: 28 mm. F: 32,9 mm. T...
€380,93 €314,82 €361,85 €299,05
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Optibelt Multi-rib belt John Deere 6100-6600, 6506, chopper 7400-7700
€75,26 €62,20 €71,45 €59,05
You save 5%
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.555,95 €1.285,91 €1.478,15 €1.221,61
You save 5%
GRANIT Gasket oil return line turbocharger
Relays changeover contact 12 V / 30 - 40 A, 5-pin, without bracket
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal.
€14,15 €11,69
GRANIT External plate clutch 2,3 mm, inner 173 mm, outer 224 mm, 8 teeth
GRANIT
Thickness (mm): 2,3 | Outer Ø (mm): 224 | Inner Ø (mm): 173 | Version: thickness = 2,3 mm inner = 173 mm outer = 244 mm 8 teeth More
Thickness (mm): 2,3 | Outer Ø (mm): 224 | Inner Ø (mm): 173 | Versio...
€37,45 €30,95 €35,55 €29,38
You save 5%
GRANIT Steering cylinder Case IH Magnum 235 - 370, New Holland T8.275 - 435
GRANIT
Reference no.: 84308818 More
Reference no.: 84308818
€555,98 €459,49 €503,00 €415,70
You save 10%
CBM Lift arm category 4, 970 mm, right / left
CBM
Category: 4 | Dimensions (mm): L: 970 mm More
Category: 4 | Dimensions (mm): L: 970 mm
€747,16 €617,49 €709,80 €586,61
You save 5%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.114,70 €921,24
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
Eaton Internal plate transmission Case IH, New Holland
Eaton
Reference no.: 1997959C1 More
Reference no.: 1997959C1
€64,37 €53,20 €61,15 €50,54
You save 5%
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Scharmüller
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330 | Overhang (mm): 67 | Plate height (mm): 160 | D-value (kN): 89,3 | G... More
Description: Can be disconnected with pin | Colour: Black | Rail width...
€758,99 €627,26 €639,25 €528,31
You save 16%
AKS-Dasis Pressure switch airco 0,5 bar Case IH, New Holland
AKS-Dasis
Opening pressure (bar): 0,5 More
Opening pressure (bar): 0,5
€121,30 €100,25 €115,20 €95,21
You save 5%
Showing 97 - 120 of 272

Case IH Magnum 310 parts for hitch, fuel system and seat

The Magnum 310 is made for long days under heavy draught, and the parts on this page follow from that. A large share covers the rear hitch, the fuel side of the engine and the driver's seat. In total there are more than 250 parts for this tractor, made by GRANIT and by brands such as ROCKINGER, Scharmüller, Walterscheid and GRAMMER.

A hitch you can configure

On a Magnum the coupling point works like a modular system. There are automatic drawbars, Piton Fix rails and adapter plates, and each must match the rail width and the bolt hole pattern of the plate on the tractor. Measure both before you choose, and you can switch between a drawbar for the trailer and a fixed pin for a heavy load without replacing the whole assembly. Connector heads and air hoses for trailer air brakes are also listed.

Engine and fuel

The engine section includes injection lines, seal sets, the gasket for the turbocharger oil return line and seals for the feed pump. Fuel system work is all about cleanliness. Clean around a union before loosening it and cap open lines straight away. An injection line that has been bent or tightened several times should not be refitted, because the cone at its end deforms when tightened and will not seal reliably again. Check which cylinder a line belongs to as well, since each one has its own shape.

For electrics and the auxiliary drive there are alternators, multi-rib belts and relays, including changeover relays. A multi-rib belt that is fraying at the edge or shows cracks across the ribs is better replaced in the workshop than in the field.

Seat and cab

The cab section lists air suspension seats from the GRAMMER Maximo line and PROBOSS seats with seat heating, together with tank caps, among them one for the cooling system.

Ordering the right part for your Magnum 310

The Magnum 310 is part of the Case IH Magnum series. Confirm the model on the type plate first. The reference number on the old part then settles what fits.

For every other tractor of the brand, from the smaller series to other Magnum models, head to Case IH parts, choose the type shown on your type plate and you will land on the page with the matching parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart