Menu
EUR

Case IH Magnum 310 tractor parts & technical data

With more than 250 parts for the Case IH Magnum 310, there is no need to look far. Trailer couplings, electrics and steering parts are sorted by group.

272 parts found for Case IH Magnum 310
Show:
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering More
Version: (Rear operation) lifting and lowering
€77,14 €63,75 €73,25 €60,54
You save 5%
LUK Torsion damper Case IH Magnum 210 - 380, Steiger 370, Quadtrac 370
€811,60 €670,74 €771,00 €637,19
You save 5%
MAHLE Alternator 14 V, 200 A, flange 101 mm Case IH, New Holland
MAHLE
Charging current (A): 200 | Direction of rotation: ↻ | Flange size (mm): 101.0 | Installation angle (°): 0 | Nominal values (V / A): 14 / 200 | Nom... More
Charging current (A): 200 | Direction of rotation: ↻ | Flange size (...
€641,83 €530,44 €601,70 €497,27
You save 6%
Mirror glass unheated 12 V, bending radius 2000 mm, left / right
Radius of curvature (mm): 2000 | Volts: 12 | Installation location: rechts / links | Version: unbeheizt More
Radius of curvature (mm): 2000 | Volts: 12 | Installation location: re...
€70,34 €58,13 €66,80 €55,21
You save 5%
DANA Spicer Plug front axle 745
€19,40 €16,03
GRANIT Bearing wheel hub 109,5 x 159 x 24 mm Carraro front axle 642680 Case IH
€69,04 €57,06 €65,55 €54,17
You save 5%
Seal kit hydraulic steering Case IH, New Holland
€103,21 €85,30 €98,00 €80,99
You save 5%
Clamp New Holland, Steyr, Case IH
€55,91 €46,21 €53,10 €43,88
You save 5%
Optibelt Multi-rib belt 8 ribs John Deere, Case IH
€75,53 €62,42 €71,75 €59,30
You save 5%
Borg Warner Fan clutch standard Case IH, New Holland
€1.292,00 €1.067,77
Borg Warner Fan clutch Twin Flow or 50 km/h Case IH, New Holland
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.988,60 €2.469,92
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€32,43 €26,80 €30,80 €25,45
You save 5%
Gas strut rear window 150 N, 325 mm, stroke 120 mm Case IH, New Holland
suitable for: Heckscheibe. Newtons: 150. A: 325 mm. B: 165 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 120 mm. To fit: Rear screen. More
suitable for: Heckscheibe. Newtons: 150. A: 325 mm. B: 165 mm. C: 10 m...
€43,51 €35,96 €41,30 €34,13
You save 5%
ROCKINGER Trailer coupling without sensor rail 330 mm, coupling pin 38 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Menke n... More
Rail width: 330 mm. Detent pin Ø: 20 mm. Guide width: 30 mm. Connecti...
€1.505,24 €1.244,00 €1.210,21 €1.000,17
You save 20%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.133,29 €936,60 €867,75 €717,15
You save 23%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 38 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€849,73 €702,26 €751,50 €621,07
You save 12%
ROCKINGER Top drawbar rail 390 mm, pin Ø 25 mm, coupling pin 36 mm
ROCKINGER
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 36 mm. Load capacity: 2000 kg. D-value: 98,1 kN. Colour: Black. Drawbar ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.858,56 €1.536,00 €1.494,25 €1.234,92
You save 20%
GRANIT Sensor driving speed transmission
GRANIT
Version: Driving speed sensor. More
Version: Driving speed sensor.
€164,68 €136,10 €156,40 €129,26
You save 5%
Push button switch rear PTO shaft 48 V, button yellow, Ø 30 mm, stroke 5 mm
Version: 48 V switching voltage, Yellow button, break contact External switch on the rear mudguard, Total button travel: 5 mm, Ø 30 mm, plug connecti... More
Version: 48 V switching voltage, Yellow button, break contact External...
€45,80 €37,85 €43,50 €35,95
You save 5%
Rotary switch fan, without knob, with cable and plug
Version: For blower, With cable and connecting plug. More
Version: For blower, With cable and connecting plug.
€283,32 €234,15 €256,30 €211,82
You save 10%
GRANIT Reflector round red Ø 85 mm, screwed M12
GRANIT
Colour: red | Hole Ø (mm): 6,5 | Total Ø (mm): 85 More
Colour: red | Hole Ø (mm): 6,5 | Total Ø (mm): 85
€2,17 €1,79
Showing 121 - 144 of 272

Case IH Magnum 310 parts for hitch, fuel system and seat

The Magnum 310 is made for long days under heavy draught, and the parts on this page follow from that. A large share covers the rear hitch, the fuel side of the engine and the driver's seat. In total there are more than 250 parts for this tractor, made by GRANIT and by brands such as ROCKINGER, Scharmüller, Walterscheid and GRAMMER.

A hitch you can configure

On a Magnum the coupling point works like a modular system. There are automatic drawbars, Piton Fix rails and adapter plates, and each must match the rail width and the bolt hole pattern of the plate on the tractor. Measure both before you choose, and you can switch between a drawbar for the trailer and a fixed pin for a heavy load without replacing the whole assembly. Connector heads and air hoses for trailer air brakes are also listed.

Engine and fuel

The engine section includes injection lines, seal sets, the gasket for the turbocharger oil return line and seals for the feed pump. Fuel system work is all about cleanliness. Clean around a union before loosening it and cap open lines straight away. An injection line that has been bent or tightened several times should not be refitted, because the cone at its end deforms when tightened and will not seal reliably again. Check which cylinder a line belongs to as well, since each one has its own shape.

For electrics and the auxiliary drive there are alternators, multi-rib belts and relays, including changeover relays. A multi-rib belt that is fraying at the edge or shows cracks across the ribs is better replaced in the workshop than in the field.

Seat and cab

The cab section lists air suspension seats from the GRAMMER Maximo line and PROBOSS seats with seat heating, together with tank caps, among them one for the cooling system.

Ordering the right part for your Magnum 310

The Magnum 310 is part of the Case IH Magnum series. Confirm the model on the type plate first. The reference number on the old part then settles what fits.

For every other tractor of the brand, from the smaller series to other Magnum models, head to Case IH parts, choose the type shown on your type plate and you will land on the page with the matching parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart