Menu
EUR

Case IH MX 90C tractor parts & technical data

Electrics, trailer couplings, and steering and front axle parts are some of the groups for the Case IH MX 90C. The full overview contains more than 250 parts.

279 parts found for Case IH MX 90C
Show:
Needle bearing oil pump Ø 30 x 34 x 16 mm
Needle bearing oil pump Ø 30 x 34 x 16 mm
Dimensions: Ø 30 x 34 x 16 mm.
€14,78 €12,21
 
Hand throttle cable A 1300 mm, B 1165 mm Case IH MX 80C-90C
8%
Hand throttle cable A 1300 mm, B 1165 mm Case IH MX 80C-90C
A: 1300 mm. B: 1165 mm.
€111,36 €92,03 €102,45 €84,67
 
Gas strut hood 880 N, 585 mm, stroke 240 mm Case IH 6381MT, MX 90C
8%
Gas strut hood 880 N, 585 mm, stroke 240 mm Case IH 6381MT, MX 90C
Newtons: 880. A: 585 mm. B: 293 mm. C: 10 mm. D: 10 mm. Stroke: 240 mm. d1: 10 m...
€82,11 €67,86 €75,54 €62,43
 
Gas strut door 350 N, 250 mm, stroke 66 mm Case IH CX 50, MX 90C
8%
Gas strut door 350 N, 250 mm, stroke 66 mm Case IH CX 50, MX 90C
suitable for: Tür. Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. Form:...
€51,70 €42,73 €47,56 €39,31
 
Handle rear window lock Case IH, New Holland
8%
Handle rear window lock Case IH, New Holland
€72,70 €60,08 €66,88 €55,28
 
Stabilizer strut 400 - 670 mm, M24 x 3 mm, cat. 1 Case IH
8%
Stabilizer strut 400 - 670 mm, M24 x 3 mm, cat. 1 Case IH
Cat.: 1. h: 44 mm. D1: 30 x 3,5 mm. D2: 24 x 3 mm. L: 400 - 670 mm. Dimensions: ...
€379,76 €313,85 €349,38 €288,74
 
Gas strut door 350 N, 250 mm Case IH CX 50, MX 90C
8%
Gas strut door 350 N, 250 mm Case IH CX 50, MX 90C
Newtons: 350. A: 250 mm. B: 125 mm. C: 13 mm. D: 13 mm. To fit: door. Form: 6.
€45,69 €37,76 €42,03 €34,74
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
 
HD-telescopic mirror bracket right Ø 19 mm, 400 - 660 mm Case IH
8%
HD-telescopic mirror bracket right Ø 19 mm, 400 - 660 mm Case IH
Ø: 19 mm. Length: 400 mm. Length max.: 660 mm. Installation location: Right.
€143,36 €118,48 €131,89 €109,00
 
HELLA Lens with indicator light, brake light, reflector, rear light left / right
HELLA
Lens with indicator light, brake light, reflector, rear light left / right
Installation location: Right, left. Test mark: E12 3024, E12 6081, E12 7111, ECE...
€25,10 €20,74
 
Cobo Indicator/position light 120 x 80 x 56 mm, P21W, R5W right
8%
Cobo
Indicator/position light 120 x 80 x 56 mm, P21W, R5W right
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Attachment: Side. Wid...
€46,69 €38,59 €42,95 €35,50
 
Radiator cap Ø 58 mm, height 25,5 mm Ford, Case IH, New Holland
Radiator cap Ø 58 mm, height 25,5 mm Ford, Case IH, New Holland
To fit as: Ford 2000, 5000, 2100, 5100, 7100, 2300, 2600, 3600, 4600, 5600, 7600...
€16,00 €13,22
 
Pin upper arm Carraro front axle 145706
8%
Pin upper arm Carraro front axle 145706
€94,45 €78,06 €86,89 €71,81
 
Pin upper arm Carraro front axle 145706
8%
Pin upper arm Carraro front axle 145706
€136,36 €112,69 €125,45 €103,68
 
Bush axle housing 105 x 115 x 44 mm Case IH
8%
Bush axle housing 105 x 115 x 44 mm Case IH
€57,89 €47,84 €53,26 €44,02
 
Seal kit steering cylinder, piston rod Ø 36 mm
8%
Seal kit steering cylinder, piston rod Ø 36 mm
€102,17 €84,44 €94,00 €77,68
 
Ball joint 430 mm, M22 x 1,5, taper 23 - 25 mm
8%
Ball joint 430 mm, M22 x 1,5, taper 23 - 25 mm
A: 430 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 23 mm. F: 25 mm. Taper: 23 - 25 ...
€173,62 €143,49 €159,73 €132,01
 
Ball joint 95 mm, M14 x 1,5, 7/8" x 16, taper 15,4 - 18,2 mm
8%
Ball joint 95 mm, M14 x 1,5, 7/8" x 16, taper 15,4 - 18,2 mm
A: 95 mm. C: M14 x 1,5 mm. D: 7/8" x 16 mm. E: 15,4 mm. F: 18,2 mm. Taper: 15,4 ...
€136,07 €112,45 €125,18 €103,46
 
Hand brake cable 1410 mm Case IH MX 80C, 90C, 100C, 100-135
8%
Hand brake cable 1410 mm Case IH MX 80C, 90C, 100C, 100-135
Length: 1410 mm. Dimensions: Length = 1410 mm.
€125,97 €104,11 €115,89 €95,78
 
Brake disc hand brake 30 km/u, Ø 142 mm, 16 teeth Case IH
8%
Brake disc hand brake 30 km/u, Ø 142 mm, 16 teeth Case IH
€55,76 €46,08 €51,30 €42,40
 
Plate hand brake 30 and 40 km/u, Ø 148 mm Case IH
8%
Plate hand brake 30 and 40 km/u, Ø 148 mm Case IH
€48,80 €40,33 €44,90 €37,10
 
Seal PTO shaft end piece 540 rpm., 32 grooves Case IH
8%
Seal PTO shaft end piece 540 rpm., 32 grooves Case IH
Version: for 540 rpm, 32 central splines.
€39,19 €32,39 €36,05 €29,80
 
PTO shaft end piece 228 mm, 1 3/8 inch 6 grooves, 21 grooves Case IH
8%
PTO shaft end piece 228 mm, 1 3/8 inch 6 grooves, 21 grooves Case IH
Version: Length 228 mm, 1 3/8", 6 grooves, 1 3/8", 21 grooves.
€268,65 €222,02 €247,16 €204,26
 
Perkins Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
10%
Perkins
Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
€87,70 €72,48 €78,79 €65,11
 
Radiator hose, top inner-Ø 54 / 42 mm Case IH
Radiator hose, top inner-Ø 54 / 42 mm Case IH
Inner Ø: 54 / 42 mm.
€38,50 €31,82
 
MANN-FILTER Filter set MX80C, MX890C, MX8100C
40%
MANN-FILTER
Filter set MX80C, MX890C, MX8100C
To fit: Case IH. To fit type: MX80C, MX890C, MX8100C. Set consisting of: Engine ...
€180,27 €148,98 €107,96 €89,23
 
Gas strut side-, for- or rear window 200 N, 490 mm, stroke 200 mm
8%
Gas strut side-, for- or rear window 200 N, 490 mm, stroke 200 mm
suitable for: Seiten-, Front- oder Heckscheibe. Newtons: 200. A: 490 mm. B: 245 ...
€40,63 €33,58 €37,38 €30,89
 
Hinge cab door bottom left Case IH CX 50, SPX3320
8%
Hinge cab door bottom left Case IH CX 50, SPX3320
€160,19 €132,39 €147,37 €121,80
 
Hinge for cab door, right lower Case IH CX 50, MX 90C
8%
Hinge for cab door, right lower Case IH CX 50, MX 90C
€83,85 €69,30 €77,14 €63,75
 
Door lock, left Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, DX 7.10
8%
Door lock, left Case IH CX 50, MX 90C, Deutz-Fahr D 4507C, DX 7.10
€99,61 €82,32 €91,64 €75,74
 
Bush front left lift arm shaft Ø 60 x 67 x 51 mm Case IH
8%
Bush front left lift arm shaft Ø 60 x 67 x 51 mm Case IH
Dimensions: Ø 60 x 67 x 51 mm.
€123,89 €102,39 €113,98 €94,20
 
O-ring for piston 93 x 102 x 5,2 mm Case IH Maxxum, MX
O-ring for piston 93 x 102 x 5,2 mm Case IH Maxxum, MX
Dimensions: 93 x 102 x 5.2 mm.
€31,33 €25,89
 
Gas strut side-, for- or rear window 200 N, 490 mm
8%
Gas strut side-, for- or rear window 200 N, 490 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: Side window, win...
€36,10 €29,83 €33,21 €27,45
 
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
18%
Walterscheid
Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. C...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
 
Showing 145 - 192 of 279

Case IH MX 90C parts: steering joints, lift shaft and electrics

This page brings together more than 250 parts for the Case IH MX 90C, from GRANIT and from makers such as HELLA, Scharmüller, ROCKINGER and MAHLE. They cover the spots where this tractor tends to need attention once it has some hours behind it.

Much of what you will find here is aimed at jobs you can tackle in your own workshop. Swapping a ball joint, renewing a seal on the lift arm shaft or replacing a dashboard switch needs no special tools, just the right part for the MX 90C.

Ball joints and axial joints

Steering wear shows up as a knock when someone rocks the wheel left and right with the tractor standing still. Put your hand on each ball joint and axial joint while that happens and you will feel which one has play. Both types are available here. After replacing either of them, reset the toe-in, otherwise the front tyres will scrub and wear unevenly.

Lift arm shaft, bushes and seals

Around the lift arm shaft there are bushes, seals and O-rings, such as a front right bush for the shaft and a piston O-ring that fits Maxxum and MX tractors. Sealing rings include one for the front of the crankshaft. When you replace a shaft seal, check the running surface on the shaft first. A groove worn into it will make even a new seal weep within weeks.

Starting, charging and switches

Alternators and starter motors take care of charging and starting. In the cab you will find rocker switches, for example the one for the front PTO in the dashboard, along with rotary switches and potentiometers. A worn potentiometer often shows itself as a linkage or PTO that responds in jerks.

Cab and hitch

Cab hinges, such as the upper right hinge on the cab door, and gas struts keep the door and windows where they belong. For the rear there are drawbars with a ball on a rail and flange hitches.

How to match a part

Start with the type plate to confirm the tractor is an MX 90C. Many old parts have a reference number stamped or printed on them, and that is the safest point of comparison. The MX 90C belongs to the Case IH MX range. From that range the Case IH MX 200 Magnum has its own page too, useful if you maintain both. Every other model of the make is reachable through Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart