Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 130 tractor parts & technical data

Servicing a Case IH MXM 130? This page holds more than 250 parts for the model, from trailer couplings and electrics to brake and transmission components.

248 parts found for Case IH MXM 130
Show:
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€29,04 €24,00
 
PROBOSS Seat air suspended AS4550 550 mm, 12 V, heating
2%
PROBOSS
Seat air suspended AS4550 550 mm, 12 V, heating
Restraint system: Optional | To fit: Case, Steyr, New Holland | Height (mm): 270...
€2.481,08 €2.050,48 €2.427,65 €2.006,32
 
HELLA Starter motor 12 V, 3,1 kW, 10 teeth, Ø 92 mm
23%
HELLA
Starter motor 12 V, 3,1 kW, 10 teeth, Ø 92 mm
€527,52 €435,97 €406,44 €335,90
 
AKS-Dasis Thermostat airco Case IH, Fiat, Ford, New Holland
8%
AKS-Dasis
Thermostat airco Case IH, Fiat, Ford, New Holland
Version: Air conditioning system
€142,98 €118,17 €131,54 €108,71
 
Scharmüller Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Scharmüller
Adapter plate rail width 335 mm, hole pattern 140 x 80 mm, M20
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 335 mm. Hole pattern: 140 ...
€638,19 €527,43
 
Scharmüller Drawbar K50 Scharmüller S32, rail 255 mm, pin Ø 25 mm, 31 kN
8%
Scharmüller
Drawbar K50 Scharmüller S32, rail 255 mm, pin Ø 25 mm, 31 kN
Rail width: 255 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 ...
€893,95 €738,80 €822,43 €679,70
 
Scharmüller Automatic hitch rail width 330 mm, coupling pin 38 mm
11%
Scharmüller
Automatic hitch rail width 330 mm, coupling pin 38 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 ...
€1.229,18 €1.015,85 €1.090,39 €901,15
 
GRAMMER Tractor seat Maximo Evolution Dynamic air suspended, 550 mm
7%
GRAMMER
Tractor seat Maximo Evolution Dynamic air suspended, 550 mm
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | Suspension...
€7.058,13 €5.833,17 €6.543,48 €5.407,83
 
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
5%
Sauermann
Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
 
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
7%
GRAMMER
Tractor seat Maximo Dynamic Plus 565 mm Case CVX, Steyr, New Holland
Side horizontal suspension: Yes | Upholstery type: Fabric / new design | Armrest...
€5.359,89 €4.429,66 €4.981,10 €4.116,61
 
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
21%
Walterscheid
Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from t...
€936,88 €774,28 €740,70 €612,15
 
Hydraulic top link cat. 3, 640 - 900 mm, cylinder-Ø 90 mm
8%
Hydraulic top link cat. 3, 640 - 900 mm, cylinder-Ø 90 mm
Top link type: hydraulic. Type: Clevis joint/ball joint. A cat.: 3 / 32. B cat.:...
€688,45 €568,97 €633,37 €523,45
 
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
8%
Wabco
Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10
€630,05 €520,70 €579,65 €479,05
 
HELLA Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
4%
HELLA
Work lamp flood beam H3, 55/70 W, 12/24 V, Ø 168 x 116 mm
Bulb: H3. Bulbs included: No. Light function: Close-range illumination. Installa...
€81,44 €67,31 €78,43 €64,82
 
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
8%
Scharmüller
Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø...
€1.092,43 €902,83 €1.005,04 €830,61
 
Scharmüller Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
8%
Scharmüller
Piton Fix inserts 3000 kg, rail 330 mm, working length 67 mm, black
Description: Can be disconnected with pin | Colour: Black | Rail width (mm): 330...
€754,30 €623,39 €693,96 €573,52
 
FEBI Secondary air filter CF1140/2
62%
FEBI
Secondary air filter CF1140/2
€45,56 €37,65 €17,32 €14,31
 
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
19%
ROCKINGER
Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.363,65 €1.126,98 €1.100,67 €909,64
 
Hand brake switch mechanical contact switch with plug connection
8%
Hand brake switch mechanical contact switch with plug connection
Version: Contact switch, Connection cable with plug connection.
€61,91 €51,17 €56,96 €47,07
 
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
4%
ROCKINGER
Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin...
€651,63 €538,54 €627,60 €518,67
 
Scharmüller Adapter plate 255 mm rail, guide 32 mm, hole pattern 140 x 80 mm
8%
Scharmüller
Adapter plate 255 mm rail, guide 32 mm, hole pattern 140 x 80 mm
Colour: Verkehrs Grau | Detent pin Ø (mm): 25 | Pin Ø (mm): 16 | Guide width (mm...
€556,82 €460,18 €512,27 €423,37
 
Scharmüller Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
8%
Scharmüller
Adapter plate 330 mm rail, guide 32 mm, hole pattern 160 x 100 mm
Description: Height adjustable with handle | V-value (kN): 45,6 | Hole pattern (...
€600,57 €496,34 €552,52 €456,63
 
Eaton Planetary gear transmission, 994 g
8%
Eaton
Planetary gear transmission, 994 g
Reference no.: 5145497
€85,99 €71,07 €79,11 €65,38
 
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 200 ccm oil
8%
SANDEN
Aircon compressor 12 V, pulley Ø 119 mm, 8 grooves, 200 ccm oil
Suitable oil: SP 10 | Pulley Ø (mm): 119 | Refrigerant: R 134a | Nominal voltage...
€748,87 €618,90 €688,96 €569,39
 
LUK Thrust bearing 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
8%
LUK
Thrust bearing 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
Dimensions (mm): 65 x 115 x 30
€409,98 €338,83 €377,18 €311,72
 
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
1%
PROBOSS
Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adj...
€1.818,19 €1.502,64 €1.792,40 €1.481,32
 
HELLA Alternator 14 V, 120 A, pulley Ø 67 mm, 8 grooves
23%
HELLA
Alternator 14 V, 120 A, pulley Ø 67 mm, 8 grooves
Charging current (A): 120 | Nominal voltage (V): 14 | Additional information: Wi...
€505,61 €417,86 €389,56 €321,95
 
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.852,29 €1.530,82 €1.464,43 €1.210,28
 
Bosch/Rexroth Hydraulic pump 22,5 cm³/rpm. anticlockwise Case IH, Fiat, New Holland
8%
Bosch/Rexroth
Hydraulic pump 22,5 cm³/rpm. anticlockwise Case IH, Fiat, New Holland
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction of rotation:...
€536,54 €443,42 €493,62 €407,95
 
Double gear transmission Case IH, Fiat, New Holland
8%
Double gear transmission Case IH, Fiat, New Holland
€447,45 €369,79 €411,65 €340,21
 
Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
8%
Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25
€218,56 €180,63 €201,08 €166,18
 
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
CARLISLE
Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€32,93 €27,21
 
WAECO PAG-compressor oil ISO 46, R134a - 250 ml can
WAECO
PAG-compressor oil ISO 46, R134a - 250 ml can
€25,00 €20,66
 
LUK Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
8%
LUK
Clutch kit without release bearing Case IH, Fiat, Ford, New Holland
Contents: Pressure plate 458133021410, clutch plate 458333007211 | Supplementary...
€657,87 €543,69 €605,24 €500,20
 
Thrust bearing single 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
8%
Thrust bearing single 65 x 115 x 30 mm Case IH, Fiat, Ford, New Holland
Dimensions (mm): 65 x 115 x 30
€126,14 €104,25 €116,05 €95,91
 
GRAMMER Tractor seat Maximo Dynamic Plus 565 mm Case IH, Steyr, New Holland
7%
GRAMMER
Tractor seat Maximo Dynamic Plus 565 mm Case IH, Steyr, New Holland
Length (mm): 648 | - Storage pocket - APS: automatic positioning system - Left a...
€5.221,00 €4.314,88 €4.853,32 €4.011,01
 
FEBI Electric cooling fan Case IH, New Holland
47%
FEBI
Electric cooling fan Case IH, New Holland
To fit as: New Holland TM 120, 130, 140, 155, 175, 190
€820,56 €678,15 €435,06 €359,55
 
MAHLE Gear reduction starter 12 V, 3,0 kW, 10 teeth, clockwise, Ø 92 mm
40%
MAHLE
Gear reduction starter 12 V, 3,0 kW, 10 teeth, clockwise, Ø 92 mm
€560,37 €463,12 €335,62 €277,38
 
Outer plate hand brake Case IH, New Holland, Steyr
8%
Outer plate hand brake Case IH, New Holland, Steyr
€126,19 €104,29 €116,09 €95,95
 
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
5%
Sauermann
Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 30...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
 
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.167,94 €965,24 €923,38 €763,13
 
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
23%
ROCKINGER
Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€1.285,58 €1.062,46 €990,51 €818,61
 
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
8%
Sauermann
Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Ø 40 mm drawbar eye, Ø 38 mm pin
€877,53 €725,23 €807,33 €667,21
 
MAHLE Airco compressor 12 V, R 134a, pulley Ø 119 mm, 8 grooves
10%
MAHLE
Airco compressor 12 V, R 134a, pulley Ø 119 mm, 8 grooves
Suitable oil: PAG 46 | For compressor: SD7H15 | No. of grooves: 8 | Additional i...
€507,16 €419,14 €455,64 €376,56
 
Scharmüller Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
6%
Scharmüller
Drawbar frame 82,4 kN, rail width 330 mm, nose weight 3000 kg
Detent pin Ø (mm): 25 | Lock: Ball 80 manual | Category: Bearing supports | Guid...
€2.239,36 €1.850,71 €2.110,21 €1.743,98
 
CARLISLE External plate 1,5 mm, inner 99 mm, outer 152 mm
8%
CARLISLE
External plate 1,5 mm, inner 99 mm, outer 152 mm
Version: Thickness: 1.5 mm Inner: 99 mm Outer: 152 mm
€35,28 €29,16 €32,46 €26,82
 
Showing 1 - 48 of 248

Case IH MXM 130 parts, front to back

More than 250 parts fit the MXM 130, from GRANIT, Scharmüller, GRAMMER, ROCKINGER and HELLA. Here they are in the order a mechanic would walk round the tractor, from the rear forwards and then into the cab.

Rear: drawbar and hitch

At the back you will find drawbars, a top drawbar, Piton Fix hitches and height adjustable adaptor plates. A Piton Fix sits fixed in the rail and is meant for drawbars with an eye that drops over the pin. For each of these, check the rail width and the thickness of the locking pin on the tractor before choosing. After fitting, push the locking pin fully home and secure it with its clip.

Middle: engine, steering and tank

Under the bonnet there are gaskets, including one for the exhaust manifold, seal kits, a starter motor, a torsion damper and a viscous fan clutch. The fan clutch is easy to judge yourself. With the engine stopped and cold, spin the fan by hand. If it freewheels with no resistance, or there is oil around the hub, it is due for replacement. A clutch that no longer grips lets the engine run hot under heavy load.

For the steering there are ball joints and a front axle steering angle sensor with cable and plug. Have the toe-in reset after replacing a ball joint, or the front tyres will wear unevenly. A vented tank cap is also available.

Inside: seating and visibility

In the cab you will find tractor seats, such as an air suspended GRAMMER Maximo and a PROBOSS seat with heating, plus gas struts for the rear window. A rear window that drops shut on its own is a nuisance and can hurt if your head happens to be out of it.

The torsion damper sits between engine and transmission and soaks up the engine's power pulses. If you hear a rattle from the clutch housing at idle that disappears as soon as you open the throttle a little, the damper is the obvious suspect. If the starter has been turning slowly lately, this is a good moment to deal with that too.

Choosing the right parts

The type plate on the MXM 130 gives the model and chassis number, which you need for parts that come in several versions, such as the ball joints. If the old part carries a reference number, take it along when you compare.

If you also run another tractor from the MXM series, its parts are on its own page:

The rest of the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart