Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 130 tractor parts & technical data

Servicing a Case IH MXM 130? This page holds more than 250 parts for the model, from trailer couplings and electrics to brake and transmission components.

248 parts found for Case IH MXM 130
Show:
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€60,06 €49,64 €55,26 €45,67
You save 8%
Ball joint 120 mm, C M20 x 1,5, D M24 x 1,5, taper 24 - 26 mm
A: 120 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 120 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€59,82 €49,44 €55,03 €45,48
You save 8%
Brake disc Ø 214,7 mm, thickness 7 mm, 52 teeth
€121,59 €100,49 €111,86 €92,45
You save 8%
MAHLE Fan clutch Ø 152 mm Case IH, New Holland
€949,67 €784,85 €568,79 €470,08
You save 40%
Borg Warner Fan clutch Case IH MXM 120-190, New Holland TM120-TM190
Borg Warner
To fit: Case IH, New Holland. More
To fit: Case IH, New Holland.
€682,40 €563,97 €574,04 €474,41
You save 16%
Thermostat Ø 54 mm, 82 °C
V-belt tensioner Ø 74 mm, 39,25 mm wide, 20,3 Nm John Deere, Case IH
€170,39 €140,82 €156,76 €129,55
You save 8%
V-belt tensioner Ø 74 mm, width 39,5 mm
Outer Ø: 74 mm. Width: 39,5 mm. More
Outer Ø: 74 mm. Width: 39,5 mm.
€192,27 €158,90 €176,89 €146,19
You save 8%
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€3.038,64 €2.511,27
Lock rear window lower
Handle linkage Case IH, Fiat, Ford, New Holland
€147,68 €122,05 €135,87 €112,29
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€116,92 €96,63 €107,57 €88,90
You save 8%
Temperature sensor coolant, thread M12 x 1,5, sensor Ø 7 mm
Version: Thread: M12 x 1.5, Probe Ø 7 mm. Temperature: 40 - 100 °C. More
Version: Thread: M12 x 1.5, Probe Ø 7 mm. Temperature: 40 - 100 °C.
€38,90 €32,15
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€151,60 €125,29 €139,47 €115,27
You save 8%
Rotary switch fan, without knob, 5 connections
Version: For blower, With 5 blade terminals. More
Version: For blower, With 5 blade terminals.
€67,42 €55,72 €62,03 €51,26
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering. More
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€47,55 €39,30 €43,75 €36,15
You save 8%
DANA Spicer Synchroniser unit, complete main reduction gear Ø 50 x 80 mm
€881,17 €728,24
DANA Spicer Synchroniser unit, complete main reduction gear forwards, Ø 50 x 80 mm
€820,99 €678,50 €755,31 €624,22
You save 8%
Seal kit hydraulic steering Case IH, New Holland, Deutz-Fahr
€80,80 €66,78 €74,34 €61,43
You save 8%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€187,43 €154,90 €172,44 €142,51
You save 8%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.506,09 €2.071,15
Reman turbocharger Case IH MXM 120-190, New Holland TM120-190
€1.141,60 €943,47 €1.094,01 €904,14
You save 4%
Retaining clamp exhaust New Holland TM120-TM155, Case IH MXM 120-155
€134,10 €110,83 €123,37 €101,96
You save 8%
Silencer New Holland TM120-TM155, Case IH MXM 120-155
€245,48 €202,88 €225,84 €186,65
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
Pulley Ø 74 mm, height 39,25 mm John Deere, Case IH, New Holland
Pulley Ø: 74 mm. Height 1: 39,25 mm. Height 2: 39,25 mm. Weight: 0.64 kg. More
Pulley Ø: 74 mm. Height 1: 39,25 mm. Height 2: 39,25 mm. Weight: 0.64...
€67,65 €55,91 €62,24 €51,44
You save 8%
Electric feed pump Case IH MXM, New Holland TM, TV
€103,03 €85,15 €94,79 €78,34
You save 8%
Electric feed pump without filter 230 l/hour, 0,55 bar
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005. More
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005...
€114,72 €94,81 €105,54 €87,23
You save 8%
Crankshaft seal rear Ø 122 x 141 x 13 mm Case IH, New Holland
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (fluoro rubber). More
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (...
€62,69 €51,81 €57,67 €47,67
You save 8%
Cylinder head gasket engine 675 TA/HJ Fiat, Case IH, New Holland
€115,00 €95,04 €105,80 €87,44
You save 8%
Cylinder head gasket engine 675 TA Ford, Case IH, Fiat, New Holland
€144,03 €119,03 €132,51 €109,51
You save 8%
Reman turbocharger Case IH MXM 120-190, New Holland TM120-TM190
€1.369,86 €1.132,12 €1.312,76 €1.084,93
You save 4%
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.553,31 €2.110,17
Windshield frame shock absorber 150 N, 585 mm
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: windscreen. Form: 2. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: windsc...
€37,75 €31,20 €34,73 €28,70
You save 8%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.405,31 €1.161,41 €1.082,77 €894,85
You save 23%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
You save 21%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€676,60 €559,17
Sauermann Drawbar frame 320/26/32, 2000/3000 kg, 89,3 kN
Sauermann
To fit as: Fiat: Serie L, Serie M. IHC: Serie MXM, Serie Puma. Ford: Serie 60. Steyr: Serie CVT. New Holland Serie T7, Serie T7 Autocommand, Serie T70... More
To fit as: Fiat: Serie L, Serie M. IHC: Serie MXM, Serie Puma. Ford: S...
€940,03 €776,88 €914,83 €756,06
You save 3%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Sensor getriebeöl temperature
Version: Sensor for transmission oil temperature. More
Version: Sensor for transmission oil temperature.
€78,03 €64,49 €71,79 €59,33
You save 8%
Showing 97 - 144 of 248

Case IH MXM 130 parts, front to back

More than 250 parts fit the MXM 130, from GRANIT, Scharmüller, GRAMMER, ROCKINGER and HELLA. Here they are in the order a mechanic would walk round the tractor, from the rear forwards and then into the cab.

Rear: drawbar and hitch

At the back you will find drawbars, a top drawbar, Piton Fix hitches and height adjustable adaptor plates. A Piton Fix sits fixed in the rail and is meant for drawbars with an eye that drops over the pin. For each of these, check the rail width and the thickness of the locking pin on the tractor before choosing. After fitting, push the locking pin fully home and secure it with its clip.

Middle: engine, steering and tank

Under the bonnet there are gaskets, including one for the exhaust manifold, seal kits, a starter motor, a torsion damper and a viscous fan clutch. The fan clutch is easy to judge yourself. With the engine stopped and cold, spin the fan by hand. If it freewheels with no resistance, or there is oil around the hub, it is due for replacement. A clutch that no longer grips lets the engine run hot under heavy load.

For the steering there are ball joints and a front axle steering angle sensor with cable and plug. Have the toe-in reset after replacing a ball joint, or the front tyres will wear unevenly. A vented tank cap is also available.

Inside: seating and visibility

In the cab you will find tractor seats, such as an air suspended GRAMMER Maximo and a PROBOSS seat with heating, plus gas struts for the rear window. A rear window that drops shut on its own is a nuisance and can hurt if your head happens to be out of it.

The torsion damper sits between engine and transmission and soaks up the engine's power pulses. If you hear a rattle from the clutch housing at idle that disappears as soon as you open the throttle a little, the damper is the obvious suspect. If the starter has been turning slowly lately, this is a good moment to deal with that too.

Choosing the right parts

The type plate on the MXM 130 gives the model and chassis number, which you need for parts that come in several versions, such as the ball joints. If the old part carries a reference number, take it along when you compare.

If you also run another tractor from the MXM series, its parts are on its own page:

The rest of the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart