Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 130 tractor parts & technical data

Servicing a Case IH MXM 130? This page holds more than 250 parts for the model, from trailer couplings and electrics to brake and transmission components.

248 parts found for Case IH MXM 130
Show:
Contact switch mechanical brake light and start safety switch
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€35,01 €28,93 €32,21 €26,62
You save 8%
HELLA Plug 2-pin, 18 A, 6 - 24 V, insulated aardaansluiting
HELLA
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal voltage: 6 - 24 V. Additional information: • With insulated earth connection, ... More
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal ...
€15,06 €12,45
Rear light right 12 V, P21W, P21/5W
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Various. Installation location: Right. Nominal voltage: 12 V. Type: Bulb. More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Various. Installation ...
€493,66 €407,99
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,94 €15,65
CARLISLE Internal plate PTO clutch 2,45 mm, inner 91 mm, outer 140 mm
CARLISLE
Version: thickness = 2,45 mm inner = 91 mm outer = 140 mm More
Version: thickness = 2,45 mm inner = 91 mm outer = 140 mm
€19,21 €15,88
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm. More
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€413,22 €341,50 €380,16 €314,18
You save 8%
Master brake cylinder mineral oil Fiat, Case IH, Ford, New Holland
€169,67 €140,22 €156,10 €129,01
You save 8%
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€3.131,13 €2.587,71
Borg Warner Cooling fan Ø 550 mm Case IH, New Holland
Borg Warner
Ø: 550 mm. To fit: Case IH, New Holland. More
Ø: 550 mm. To fit: Case IH, New Holland.
€264,27 €218,41 €222,31 €183,73
You save 16%
Cooling fan Ø 545 mm Case IH, New Holland
Ø: 545 mm. Menke no.: 95216. More
Ø: 545 mm. Menke no.: 95216.
€196,62 €162,50 €180,89 €149,50
You save 8%
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€19,59 €16,19
Cooling fan Ø 500 mm Ford, Case IH, Fiat, Steyr, New Holland
V-belt water pump Case IH MXM 120-190, New Holland TM120-TM190
Version: For water pump. More
Version: For water pump.
€58,28 €48,17 €53,62 €44,31
You save 8%
Exhaust manifold gasket for cylinder head
€35,09 €29,00 €32,28 €26,68
You save 8%
Bosch/Rexroth Hydraulic pump clockwise 25 cm³/rpm., taper 1:8, Ø 17,46
Bosch/Rexroth
Output volume: 25 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Line connection suction side: Ø 40mm, 4-Loch, M8. Line conn... More
Output volume: 25 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€694,50 €573,97 €638,94 €528,05
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus MSG95A/731
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.241,08 €1.852,13
Door lock, right Case IH JX 70U, MXM 190, New Holland T5030, TS115
€220,86 €182,53 €203,19 €167,93
You save 8%
Handle right and left Case IH, New Holland
€93,38 €77,17 €85,91 €71,00
You save 8%
Replacement key
€10,41 €8,61
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Lift rod right 640 - 850 mm, M33 x 3 mm, eye-Ø 24 mm
Eye Ø: 24 mm. Thread: M33 x 3 mm. Sleeve length: 280 mm. Length min./max.: 640 - 850 mm. Installation location: rechts. Fork inner width: 34 mm. More
Eye Ø: 24 mm. Thread: M33 x 3 mm. Sleeve length: 280 mm. Length min./...
€588,01 €485,96 €540,97 €447,08
You save 8%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
Scharmüller Automatic hitch rail width 255 mm, coupling pin 38 mm
Scharmüller
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.236,75 €1.022,11 €1.083,22 €895,22
You save 12%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Oil pressure switch oil filter hydraulics with seal ring, 12 / 24 volt
Version: With sealing ring, operating voltage 12/24 V. More
Version: With sealing ring, operating voltage 12/24 V.
€277,78 €229,57 €255,56 €211,20
You save 8%
Oil pressure switch steering, 2 blade connections
Version: 2 blade terminals, Also suitable for: four-wheel drive, power shuttle and differential lock. More
Version: 2 blade terminals, Also suitable for: four-wheel drive, power...
€81,29 €67,18 €74,79 €61,81
You save 8%
Sensor steering angle front axle, connection cable with plug
Version: Steering angle (front axle), Connection cable with plug. More
Version: Steering angle (front axle), Connection cable with plug.
€525,89 €434,62 €483,82 €399,85
You save 8%
Starter switch without key, connection cable with plug
Version: Connection cable with plug, Key 50717018. More
Version: Connection cable with plug, Key 50717018.
€101,02 €83,49 €92,94 €76,81
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W left
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€50,80 €41,98 €33,09 €27,35
You save 35%
Pin Ø 24,97 x 91 mm Case IH, Fiat, New Holland
€45,90 €37,93 €42,23 €34,90
You save 8%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€36,19 €29,91
Pressure ring foot brake Case IH MXM 120-155
€206,24 €170,45 €189,74 €156,81
You save 8%
Sealing ring foot brake 259,6 x 266,4 x 3,4 mm
€50,32 €41,59 €46,29 €38,26
You save 8%
Brake lining hand brake pad on both sides Case IH, Steyr, New Holland
Brake band PTO shaft Ø 210,1 x 19,1 x 1,5 mm Case IH, Ford
Version: Ø 210.1 x 19.1 x 1.5 mm. More
Version: Ø 210.1 x 19.1 x 1.5 mm.
€39,40 €32,56
PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042. More
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125...
€343,68 €284,03 €316,19 €261,31
You save 8%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm. More
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€354,81 €293,23 €326,43 €269,77
You save 8%
Showing 145 - 192 of 248

Case IH MXM 130 parts, front to back

More than 250 parts fit the MXM 130, from GRANIT, Scharmüller, GRAMMER, ROCKINGER and HELLA. Here they are in the order a mechanic would walk round the tractor, from the rear forwards and then into the cab.

Rear: drawbar and hitch

At the back you will find drawbars, a top drawbar, Piton Fix hitches and height adjustable adaptor plates. A Piton Fix sits fixed in the rail and is meant for drawbars with an eye that drops over the pin. For each of these, check the rail width and the thickness of the locking pin on the tractor before choosing. After fitting, push the locking pin fully home and secure it with its clip.

Middle: engine, steering and tank

Under the bonnet there are gaskets, including one for the exhaust manifold, seal kits, a starter motor, a torsion damper and a viscous fan clutch. The fan clutch is easy to judge yourself. With the engine stopped and cold, spin the fan by hand. If it freewheels with no resistance, or there is oil around the hub, it is due for replacement. A clutch that no longer grips lets the engine run hot under heavy load.

For the steering there are ball joints and a front axle steering angle sensor with cable and plug. Have the toe-in reset after replacing a ball joint, or the front tyres will wear unevenly. A vented tank cap is also available.

Inside: seating and visibility

In the cab you will find tractor seats, such as an air suspended GRAMMER Maximo and a PROBOSS seat with heating, plus gas struts for the rear window. A rear window that drops shut on its own is a nuisance and can hurt if your head happens to be out of it.

The torsion damper sits between engine and transmission and soaks up the engine's power pulses. If you hear a rattle from the clutch housing at idle that disappears as soon as you open the throttle a little, the damper is the obvious suspect. If the starter has been turning slowly lately, this is a good moment to deal with that too.

Choosing the right parts

The type plate on the MXM 130 gives the model and chassis number, which you need for parts that come in several versions, such as the ball joints. If the old part carries a reference number, take it along when you compare.

If you also run another tractor from the MXM series, its parts are on its own page:

The rest of the brand is under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart