Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 155 tractor parts & technical data

There is always something to replace on a Case IH MXM 155. This page lists more than 250 parts for the MXM series, such as trailer couplings and electrics.

239 parts found for Case IH MXM 155
Show:
Glow plug 12 V, 15,5 A, thread 7/8 inch - 14 UNF
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF. More
Version: 12 V, 15.5 A, thread 7/8" - 14 UNF.
€33,85 €27,98
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€3.038,64 €2.511,27
Lock rear window lower
Handle linkage Case IH, Fiat, Ford, New Holland
€147,68 €122,05 €135,87 €112,29
You save 8%
Scharmüller Drawbar K80 manual, rail 335 mm, pin Ø 22 mm, 3000 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.349,76 €1.115,50 €1.183,18 €977,84
You save 12%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€116,92 €96,63 €107,57 €88,90
You save 8%
Temperature sensor coolant, thread M12 x 1,5, sensor Ø 7 mm
Version: Thread: M12 x 1.5, Probe Ø 7 mm. Temperature: 40 - 100 °C. More
Version: Thread: M12 x 1.5, Probe Ø 7 mm. Temperature: 40 - 100 °C.
€38,90 €32,15
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€151,60 €125,29 €139,47 €115,27
You save 8%
Rotary switch fan, without knob, 5 connections
Version: For blower, With 5 blade terminals. More
Version: For blower, With 5 blade terminals.
€67,42 €55,72 €62,03 €51,26
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering. More
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W right
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€47,55 €39,30 €43,75 €36,15
You save 8%
DANA Spicer Synchroniser unit, complete main reduction gear Ø 50 x 80 mm
€881,17 €728,24
DANA Spicer Synchroniser unit, complete main reduction gear forwards, Ø 50 x 80 mm
€820,99 €678,50 €755,31 €624,22
You save 8%
Seal kit hydraulic steering Case IH, New Holland, Deutz-Fahr
€80,80 €66,78 €74,34 €61,43
You save 8%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€187,43 €154,90 €172,44 €142,51
You save 8%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.506,09 €2.071,15
Reman turbocharger Case IH MXM 120-190, New Holland TM120-190
€1.141,60 €943,47 €1.094,01 €904,14
You save 4%
Retaining clamp exhaust New Holland TM120-TM155, Case IH MXM 120-155
€134,10 €110,83 €123,37 €101,96
You save 8%
Silencer New Holland TM120-TM155, Case IH MXM 120-155
€245,48 €202,88 €225,84 €186,65
You save 8%
Tank cap thread 45 mm, for expansion tank
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,78 €13,86
Pulley Ø 74 mm, height 39,25 mm John Deere, Case IH, New Holland
Pulley Ø: 74 mm. Height 1: 39,25 mm. Height 2: 39,25 mm. Weight: 0.64 kg. More
Pulley Ø: 74 mm. Height 1: 39,25 mm. Height 2: 39,25 mm. Weight: 0.64...
€67,65 €55,91 €62,24 €51,44
You save 8%
Electric feed pump Case IH MXM, New Holland TM, TV
€103,03 €85,15 €94,79 €78,34
You save 8%
Electric feed pump without filter 230 l/hour, 0,55 bar
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005. More
Version: Delivery volume 230 l/h, Pressure 0.55 bar. Menke no.: 209005...
€114,72 €94,81 €105,54 €87,23
You save 8%
Crankshaft seal rear Ø 122 x 141 x 13 mm Case IH, New Holland
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (fluoro rubber). More
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (...
€62,69 €51,81 €57,67 €47,67
You save 8%
Cylinder head gasket engine 675 TA/HJ Fiat, Case IH, New Holland
€115,00 €95,04 €105,80 €87,44
You save 8%
Cylinder head gasket engine 675 TA Ford, Case IH, Fiat, New Holland
€144,03 €119,03 €132,51 €109,51
You save 8%
Reman turbocharger Case IH MXM 120-190, New Holland TM120-TM190
€1.369,86 €1.132,12 €1.312,76 €1.084,93
You save 4%
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.553,31 €2.110,17
Windshield frame shock absorber 150 N, 585 mm
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: windscreen. Form: 2. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: windsc...
€37,75 €31,20 €34,73 €28,70
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€952,66 €787,32 €835,29 €690,32
You save 12%
Scharmüller Drawbar ball 50 rail 335 mm, pin Ø 22 mm, 250 kg, AGCO gray
Scharmüller
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 168 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 335 mm. Guide width: 30 mm. Detent pin Ø: 22 mm. Load cap...
€839,65 €693,93 €812,85 €671,77
You save 3%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.405,31 €1.161,41 €1.082,77 €894,85
You save 23%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.347,24 €1.939,87 €1.855,75 €1.533,68
You save 21%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€676,60 €559,17
Seal kit New Holland TM120-TM165, Case IH MXM 140-155
€108,90 €90,00 €100,19 €82,80
You save 8%
Sauermann Drawbar frame 320/26/32, 2000/3000 kg, 89,3 kN
Sauermann
To fit as: Fiat: Serie L, Serie M. IHC: Serie MXM, Serie Puma. Ford: Serie 60. Steyr: Serie CVT. New Holland Serie T7, Serie T7 Autocommand, Serie T70... More
To fit as: Fiat: Serie L, Serie M. IHC: Serie MXM, Serie Puma. Ford: S...
€940,03 €776,88 €914,83 €756,06
You save 3%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
Sensor getriebeöl temperature
Version: Sensor for transmission oil temperature. More
Version: Sensor for transmission oil temperature.
€78,03 €64,49 €71,79 €59,33
You save 8%
Contact switch mechanical brake light and start safety switch
Version: Brake light and start safety switch. More
Version: Brake light and start safety switch.
€35,01 €28,93 €32,21 €26,62
You save 8%
HELLA Plug 2-pin, 18 A, 6 - 24 V, insulated aardaansluiting
HELLA
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal voltage: 6 - 24 V. Additional information: • With insulated earth connection, ... More
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal ...
€15,06 €12,45
Rear light right 12 V, P21W, P21/5W
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Various. Installation location: Right. Nominal voltage: 12 V. Type: Bulb. More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Various. Installation ...
€493,66 €407,99
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,94 €15,65
CARLISLE Internal plate PTO clutch 2,45 mm, inner 91 mm, outer 140 mm
CARLISLE
Version: thickness = 2,45 mm inner = 91 mm outer = 140 mm More
Version: thickness = 2,45 mm inner = 91 mm outer = 140 mm
€19,21 €15,88
Track rod 1632 mm, 23,5 - 26,4 mm, 40 mm
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm. More
A: 1632 mm. C: 23,5 - 26,4 mm. G: . E: 40 mm.
€413,22 €341,50 €380,16 €314,18
You save 8%
Showing 97 - 144 of 239

Case IH MXM 155 parts for driveline, steering and cab

A rattle in the driveline at idle, play in the steering or a hitch that clunks: these turn up on a Case IH MXM 155 with plenty of hours behind it. This page lists more than 250 replacement parts for the MXM 155, from GRANIT, Scharmüller, GRAMMER, ROCKINGER, PROBOSS and others.

Steering

Ball joints and a steering sensor are available for the MXM 155. To check a ball joint, grab the track rod with the wheels on the ground and move it firmly by hand. Any play you can feel or hear in the joint means it should be replaced, and if both sides are the same age it makes sense to do them together.

Driveline and engine

The torsion damper sits between the engine and the transmission and absorbs vibration. If you hear a rattle at idle that disappears when you press the clutch or engage the PTO, the torsion damper is a likely suspect. Engine parts include a starter motor, a fan clutch, a seal kit and an exhaust manifold gasket.

Hitching and the cab

  • Drawbars, a Piton Fix and a top drawbar
  • Height adjustable adapter plates
  • Tractor seats, such as the air suspended Maximo Dynamic and a PROBOSS seat
  • Gas struts, for example for the rear window
  • A tank cap

Matching parts to your MXM

The type plate confirms that the tractor is an MXM 155. Across the MXM series many parts look identical while their dimensions differ. Compare the reference number on the removed part with the details listed for the item, particularly for a torsion damper or a ball joint.

Fan clutch and starter

The fan clutch lets the fan turn according to engine temperature. With the engine cold and stopped, spin the fan by hand. It should offer some resistance and must not rattle or leak oil. If it spins as freely as a loose wheel, the clutch no longer grips. If you suspect the starter motor, check the battery, its terminals and the earth cable first, as they are often the real reason for slow cranking.

A seal kit contains the rings and gaskets needed for a complete repair. Always fit the whole kit, even if an old ring still looks fine, because aged seals harden and rarely seal again once disturbed.

More from the MXM series

The Case IH MXM 190 and the Case IH MXM 130 each have a dedicated page with the parts that fit them. All other Case IH tractors are collected at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart