Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXM 155 tractor parts & technical data

There is always something to replace on a Case IH MXM 155. This page lists more than 250 parts for the MXM series, such as trailer couplings and electrics.

239 parts found for Case IH MXM 155
Show:
Master brake cylinder mineral oil Fiat, Case IH, Ford, New Holland
€169,67 €140,22 €156,10 €129,01
You save 8%
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€3.131,13 €2.587,71
Borg Warner Cooling fan Ø 550 mm Case IH, New Holland
Borg Warner
Ø: 550 mm. To fit: Case IH, New Holland. More
Ø: 550 mm. To fit: Case IH, New Holland.
€264,27 €218,41 €222,31 €183,73
You save 16%
Cooling fan Ø 545 mm Case IH, New Holland
Ø: 545 mm. Menke no.: 95216. More
Ø: 545 mm. Menke no.: 95216.
€196,62 €162,50 €180,89 €149,50
You save 8%
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€19,59 €16,19
Cooling fan Ø 500 mm Ford, Case IH, Fiat, Steyr, New Holland
V-belt water pump Case IH MXM 120-190, New Holland TM120-TM190
Version: For water pump. More
Version: For water pump.
€58,28 €48,17 €53,62 €44,31
You save 8%
Exhaust manifold gasket for cylinder head
€35,09 €29,00 €32,28 €26,68
You save 8%
GRAMMER Tractor seat Maximo Comfort Plus MSG95A/731
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.241,08 €1.852,13
Door lock, right Case IH JX 70U, MXM 190, New Holland T5030, TS115
€220,86 €182,53 €203,19 €167,93
You save 8%
Handle right and left Case IH, New Holland
€93,38 €77,17 €85,91 €71,00
You save 8%
Replacement key
€10,41 €8,61
Replacement glass mirror unheated 308 x 176 x 3 mm, radius 1800 mm
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location: Right/left. Radius of curvature: 1800 mm. Reference no.: 81637330032. Applicat... More
Dimensions: 308 x 176 x 3 mm. Version: Unheated. Installation location...
€33,84 €27,97 €31,13 €25,73
You save 8%
Lift rod right 640 - 850 mm, M33 x 3 mm, eye-Ø 24 mm
Eye Ø: 24 mm. Thread: M33 x 3 mm. Sleeve length: 280 mm. Length min./max.: 640 - 850 mm. Installation location: rechts. Fork inner width: 34 mm. More
Eye Ø: 24 mm. Thread: M33 x 3 mm. Sleeve length: 280 mm. Length min./...
€588,01 €485,96 €540,97 €447,08
You save 8%
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€1.953,30 €1.614,30 €1.594,29 €1.317,60
You save 18%
Scharmüller Automatic hitch rail width 255 mm, coupling pin 38 mm
Scharmüller
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 255 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.236,75 €1.022,11 €1.083,22 €895,22
You save 12%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 335 mm, 4000 kg
Scharmüller
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.116,48 €922,71
Oil pressure switch oil filter hydraulics with seal ring, 12 / 24 volt
Version: With sealing ring, operating voltage 12/24 V. More
Version: With sealing ring, operating voltage 12/24 V.
€277,78 €229,57 €255,56 €211,20
You save 8%
Oil pressure switch steering, 2 blade connections
Version: 2 blade terminals, Also suitable for: four-wheel drive, power shuttle and differential lock. More
Version: 2 blade terminals, Also suitable for: four-wheel drive, power...
€81,29 €67,18 €74,79 €61,81
You save 8%
Sensor steering angle front axle, connection cable with plug
Version: Steering angle (front axle), Connection cable with plug. More
Version: Steering angle (front axle), Connection cable with plug.
€525,89 €434,62 €483,82 €399,85
You save 8%
Starter switch without key, connection cable with plug
Version: Connection cable with plug, Key 50717018. More
Version: Connection cable with plug, Key 50717018.
€101,02 €83,49 €92,94 €76,81
You save 8%
Cobo Indicator/position light 122 x 82 x 60 mm, P21W, R5W left
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 mm. Form: Rectangular. Height: 82 mm. Dimensions W x H x D: 122 x 82 x 60 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 122 ...
€50,80 €41,98 €33,09 €27,35
You save 35%
Pin Ø 24,97 x 91 mm Case IH, Fiat, New Holland
€45,90 €37,93 €42,23 €34,90
You save 8%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€36,19 €29,91
Pressure ring foot brake Case IH MXM 120-155
€206,24 €170,45 €189,74 €156,81
You save 8%
Sealing ring foot brake 259,6 x 266,4 x 3,4 mm
€50,32 €41,59 €46,29 €38,26
You save 8%
Brake lining hand brake pad on both sides Case IH, Steyr, New Holland
Brake band PTO shaft Ø 210,1 x 19,1 x 1,5 mm Case IH, Ford
Version: Ø 210.1 x 19.1 x 1.5 mm. More
Version: Ø 210.1 x 19.1 x 1.5 mm.
€39,40 €32,56
PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042. More
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125...
€343,68 €284,03 €316,19 €261,31
You save 8%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm. More
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€354,81 €293,23 €326,43 €269,77
You save 8%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.732,20 €1.431,57
Fan clutch M30 x 2 L, hole spacing-Ø 96,77 mm
Thread: M30 x 2 L. PCD: 96,77 mm. More
Thread: M30 x 2 L. PCD: 96,77 mm.
€225,56 €186,41 €207,52 €171,50
You save 8%
Fan clutch M30 x 2 L, Ø 152,4 mm New Holland, Case IH
Weight: 6000 g. Thread: M30 x 2 L. PCD: 152,4 mm. Equipment: 662 Drive. Menke no.: 95215. More
Weight: 6000 g. Thread: M30 x 2 L. PCD: 152,4 mm. Equipment: 662 Drive...
€545,56 €450,88 €501,92 €414,81
You save 8%
Radiator hose, bottom inner-Ø 50 mm New Holland, Case IH
€74,79 €61,81 €68,81 €56,87
You save 8%
Showing 145 - 192 of 239

Case IH MXM 155 parts for driveline, steering and cab

A rattle in the driveline at idle, play in the steering or a hitch that clunks: these turn up on a Case IH MXM 155 with plenty of hours behind it. This page lists more than 250 replacement parts for the MXM 155, from GRANIT, Scharmüller, GRAMMER, ROCKINGER, PROBOSS and others.

Steering

Ball joints and a steering sensor are available for the MXM 155. To check a ball joint, grab the track rod with the wheels on the ground and move it firmly by hand. Any play you can feel or hear in the joint means it should be replaced, and if both sides are the same age it makes sense to do them together.

Driveline and engine

The torsion damper sits between the engine and the transmission and absorbs vibration. If you hear a rattle at idle that disappears when you press the clutch or engage the PTO, the torsion damper is a likely suspect. Engine parts include a starter motor, a fan clutch, a seal kit and an exhaust manifold gasket.

Hitching and the cab

  • Drawbars, a Piton Fix and a top drawbar
  • Height adjustable adapter plates
  • Tractor seats, such as the air suspended Maximo Dynamic and a PROBOSS seat
  • Gas struts, for example for the rear window
  • A tank cap

Matching parts to your MXM

The type plate confirms that the tractor is an MXM 155. Across the MXM series many parts look identical while their dimensions differ. Compare the reference number on the removed part with the details listed for the item, particularly for a torsion damper or a ball joint.

Fan clutch and starter

The fan clutch lets the fan turn according to engine temperature. With the engine cold and stopped, spin the fan by hand. It should offer some resistance and must not rattle or leak oil. If it spins as freely as a loose wheel, the clutch no longer grips. If you suspect the starter motor, check the battery, its terminals and the earth cable first, as they are often the real reason for slow cranking.

A seal kit contains the rings and gaskets needed for a complete repair. Always fit the whole kit, even if an old ring still looks fine, because aged seals harden and rarely seal again once disturbed.

More from the MXM series

The Case IH MXM 190 and the Case IH MXM 130 each have a dedicated page with the parts that fit them. All other Case IH tractors are collected at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart