Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Case IH MXU 110 tractor parts & technical data

More than 250 parts fit the Case IH MXU 110. Find trailer couplings, electrics and engine components here, gathered on one page for this tractor model.

276 parts found for Case IH MXU 110
Show:
Filter dryer Ø 63,5 mm, 152 mm, connection thread M/F
Weight (g): 666 | Dimensions (mm): - | Outer Ø (mm): 63,5 | Material: Steel | Thread: #6 3/8 O-ring | Length (mm): 152 | Connection thread: M/F 20/20 More
Weight (g): 666 | Dimensions (mm): - | Outer Ø (mm): 63,5 | Material:...
€51,24 €42,35 €47,14 €38,96
You save 8%
FEBI Rocker Cover Gasket Case IH MXU 110, Maxxum (Tier 3) 110, 120, 130
FEBI
Rocker Cover Gasket Case IH MXU 110, Maxxum (Tier 3) 110, 120, 130 More
Rocker Cover Gasket Case IH MXU 110, Maxxum (Tier 3) 110, 120, 130
€35,20 €29,09 €14,66 €12,12
You save 58%
Ball joint 500 mm, 3/4" x 16, 34,8 mm
A: 500 mm. C: 3/4" x 16 mm. D: 34,8 mm. E: 23,9 mm. F: 27,4 mm. Taper: 23,9 - 27,4 mm. More
A: 500 mm. C: 3/4" x 16 mm. D: 34,8 mm. E: 23,9 mm. F: 27,4 mm. Taper:...
€123,56 €102,12 €113,68 €93,95
You save 8%
Ball joint 75 mm, 7/8" x 14 mm, 1 1/4", taper 27 - 32 mm
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27 - 32 mm. More
A: 75 mm. C: 7/8" x 14 mm. D: 1 1/4" mm. E: 27 mm. F: 32 mm. Taper: 27...
€120,97 €99,98 €111,29 €91,98
You save 8%
Ball joint 95 mm, M27 x 1,5, 7/8" x 14, taper 30 - 34,6 mm
A: 95 mm. C: M27 x 1,5 mm. D: 7/8" x 14 mm. E: 30 mm. F: 34,6 mm. Taper: 30 - 34,6 mm. More
A: 95 mm. C: M27 x 1,5 mm. D: 7/8" x 14 mm. E: 30 mm. F: 34,6 mm. Tape...
€193,93 €160,27 €178,42 €147,45
You save 8%
Steering cylinder right and left ball eye-Ø 20 mm Case IH, New Holland
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€443,83 €366,80 €408,32 €337,46
You save 8%
Oil sump gasket Case IH, Steyr, New Holland
€48,74 €40,28 €44,84 €37,06
You save 8%
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
GRAMMER
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Se... More
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholst...
€7.096,01 €5.864,47 €6.578,33 €5.436,64
You save 7%
Lift arm shaft 605 mm, Ø 30 mm Case IH, Fiat
Dimensions: Length = 605, Ø = 30 mm. More
Dimensions: Length = 605, Ø = 30 mm.
€162,07 €133,94 €149,10 €123,23
You save 8%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.070,65 €884,83 €1.013,17 €837,33
You save 5%
Push button switch PTO shaft with connection cable and plug
Version: Front PTO operation, Connection cable with plug. More
Version: Front PTO operation, Connection cable with plug.
€193,40 €159,83 €177,93 €147,05
You save 8%
Preheating relay 12 volt with plug connection
Version: 12 V, with plug connection. More
Version: 12 V, with plug connection.
€170,59 €140,98 €156,94 €129,70
You save 8%
PROBOSS Tractor seat AS1480 air suspended fabric 12 V, seat width 480 mm
PROBOSS
Air suspension with 12V compressor. Fore/aft isolator. Continuous height adjustment, longitudinal adjustment and backrest tilt adjustment. Mechanical ... More
Air suspension with 12V compressor. Fore/aft isolator. Continuous heig...
€842,55 €696,32
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colour: Kubota grey | Version: Standard | Width (mm): 50 | Length (mm): 24... More
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): ...
€269,09 €222,39 €247,56 €204,60
You save 8%
Steering cylinder Ford, Case IH, New Holland
€648,05 €535,58 €596,21 €492,73
You save 8%
Seal kit hydraulic steering Case IH, New Holland
€106,44 €87,97 €97,92 €80,93
You save 8%
Seal kit hydraulic steering Case IH, New Holland
€47,79 €39,50 €43,97 €36,34
You save 8%
Ball joint 106 mm, taper 20 - 22 mm, M18 x 1,5, M24 x 1,5
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€60,06 €49,64 €55,26 €45,67
You save 8%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 27 mm. More
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Tap...
€64,90 €53,64 €59,71 €49,35
You save 8%
Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
€277,14 €229,04 €254,97 €210,72
You save 8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
You save 8%
Scharmüller Adapter plate rail width 295 mm, hole pattern 140 x 80 mm, M16
Scharmüller
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pattern: 140 x 80 mm. Guide width: 26 mm. Plate height: 133 mm. Thread: M16. Colour... More
Load capacity: 2000 kg. D-value: 83,9 kN. Rail width: 295 mm. Hole pat...
€617,18 €510,07 €512,27 €423,37
You save 17%
Dayco Idler pulley Ø 65 mm, height 32 mm, Tector Case IH, Steyr, New Holland
Dayco
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector. More
Outer Ø: 65 mm. Height: 32 mm. Installation location: Tector.
€144,32 €119,27 €132,77 €109,73
You save 8%
Thermostat gasket Case IH, Steyr, New Holland
€33,42 €27,62 €30,75 €25,41
You save 8%
Air hose inlet manifold inner-Ø 57 / 76 mm, length 94 mm
Inner Ø: 57 / 76 mm. Length: 94 mm. More
Inner Ø: 57 / 76 mm. Length: 94 mm.
€69,05 €57,07 €63,53 €52,50
You save 8%
GRAMMER Tractor seat Maximo Dynamic DDS MSG95AL/741
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€3.038,64 €2.511,27
Mirror 145 x 195 mm Case IH, New Holland
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm. More
Dimensions: 145 x 195 mm. Height: 195 mm. Width: 145 mm.
€58,03 €47,96 €53,39 €44,12
You save 8%
Fender bracket left complete sprung front axle with brake MXU 100-135
€451,01 €372,74 €414,93 €342,92
You save 8%
ROCKINGER Drawbar without sensor rail width 330 mm, coupling pin 30,6 mm
ROCKINGER
Colour: Black. Description: Entire coupling body and bearing forged, Easy height adjustment thanks to the use of sliding blocks, Cylindrical hitch bol... More
Colour: Black. Description: Entire coupling body and bearing forged, E...
€1.126,27 €930,80 €867,77 €717,17
You save 23%
Spiegelarm left Case IH, New Holland
€192,61 €159,18 €177,20 €146,45
You save 8%
Wiper motor windshield Case IH, New Holland
€313,64 €259,21 €288,55 €238,47
You save 8%
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesive with a safe drive away time of 2 hours. Our new product is the per... More
Colour: Black. Description: TEROSON® BOND 120 is a high-performance g...
€29,49 €24,37
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€116,92 €96,63 €107,57 €88,90
You save 8%
Sensor driving speed rear axle, connection cable with plug
Version: Driving speed sensor (rear axle housing), Connection cable with plug. More
Version: Driving speed sensor (rear axle housing), Connection cable wi...
€124,37 €102,79 €114,42 €94,56
You save 8%
Potentiometer rotation angle sensor EHR 4000 Ohm, 13,5 V
Version: Rotation angle sensor (position), electronic linkage control, For clutch and brake operation. More
Version: Rotation angle sensor (position), electronic linkage control,...
€151,60 €125,29 €139,47 €115,27
You save 8%
Rocker switch rear lift lifting and lowering
Version: (Rear operation) lifting and lowering. More
Version: (Rear operation) lifting and lowering.
€80,49 €66,52 €74,05 €61,20
You save 8%
LED work lights spotlight 12 W, 2359 lm, 110 x 60 x 76 mm, IP6K9K
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: Far-reaching illumination. Dimensions W x H x D:... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€57,63 €47,63 €53,02 €43,82
You save 8%
DANA Spicer Synchro unit, complete High/Low range shift 16 x 16 and 17 x 16
€862,04 €712,43 €793,08 €655,44
You save 8%
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€480,04 €396,73 €287,51 €237,61
You save 40%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€187,43 €154,90 €172,44 €142,51
You save 8%
Wabco Compressor 11,5 bar, 159 cm³, Ø 75 mm, stroke 36 mm
Wabco
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed: 3000 1/min.. Piston Ø: 75 mm. Piston stroke: 36 mm. Cooling system: Air. Threa... More
Operating pressure max.: 11.5 bar. Cylinder capacity: 159 cm³. Speed:...
€1.893,95 €1.565,25 €1.742,43 €1.440,03
You save 8%
LUK Torsion damper PTO shaft 8 teeth, 31,9 x 35
LUK
Number of teeth: 8. Tooth profile: 31.9x35. More
Number of teeth: 8. Tooth profile: 31.9x35.
€267,68 €221,22 €246,27 €203,53
You save 8%
LUK Torsion damper 16 teeth, tooth profile 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343. More
Number of teeth: 16. Tooth profile: 31x35. Menke no.: 92343.
€765,95 €633,02 €704,67 €582,38
You save 8%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
Showing 97 - 144 of 276

Case IH MXU 110 parts for sensors, seals, steering and hitch

A PTO speed warning, a weeping seal or play in a steering ball joint are the kind of jobs that come up on an MXU 110. This page lists more than 250 new parts that fit the Case IH MXU 110, from GRANIT, Scharmüller, ROCKINGER, GRAMMER and PROBOSS.

Before replacing a PTO speed sensor

The PTO speed sensor sits close to rotating gears, and its magnetic tip collects fine metal particles over time. If you get a fault code or an erratic reading, remove the sensor and clean the tip first. That often cures it. If the cable is damaged or the fault returns, fit a new sensor complete with cable and plug.

Seals and O-rings

For the hydraulics and driveline there are seal kits, individual sealing rings and O-rings. Give an O-ring a light coat of clean oil before fitting. Pushed dry over an edge, it can pick up a nick you only notice once it starts to leak.

Steering, hitching and towing

  • Ball joints in several versions
  • Drawbars and Piton Fix rails with locking pin
  • Adapter plates with height adjustment
  • Drawbar beams for the hitch

To check a ball joint, keep the wheels on the ground and have someone rock the steering wheel back and forth. Watch whether the joint moves before the wheel follows. Any visible movement within the joint means it is due for replacement.

In the cab

There are air suspended tractor seats from GRAMMER and PROBOSS among others, as well as mirrors, rocker switches, gas struts and a tank cap for when the old one is lost or broken.

Where two gas struts work on one window or panel, replace them as a pair. A fresh strut next to a tired one twists the glass over time. On a drawbar or drawbar beam that has done plenty of heavy towing, recheck the mounting bolts after the first few hours of use, as new contact faces settle slightly.

Matching parts to your MXU 110

The MXU 110 belongs to the Case IH MXU series. Start with the chassis number on the data plate. On sensors the reference number is usually printed on the body, while with seal kits you compare the size of the old rings with the new ones.

Other MXU models

Each tractor in the MXU series has its own page with the parts for that model:

The full overview is at Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart