Menu
EUR

Case IH MXU 115 tractor parts & technical data

Engine components, electrics and trailer couplings for the Case IH MXU 115 are lined up here. The page holds more than 250 parts for this MXU series model.

265 parts found for Case IH MXU 115
Show:
Contact switch gear switch status LOW, black
5%
Contact switch gear switch status LOW, black
Version: Status switch, LOW (black).
€96,01 €79,35 €91,20 €75,37
 
GRANIT Rocker switch EHR built-in rear on the fender
10%
GRANIT
Rocker switch EHR built-in rear on the fender
Version: Mounting: on the rear mudguard.
€108,89 €89,99 €98,50 €81,41
 
Cobo Lamp glass right, left
Cobo
Lamp glass right, left
Installation location: Right, left.
€19,20 €15,87
 
GRANIT Flasher unit 12 V, 16 blade connections, with holder
5%
GRANIT
Flasher unit 12 V, 16 blade connections, with holder
Version: 12 V, with bracket, Control unit for indicator and hazard warning light...
€242,98 €200,81 €230,80 €190,74
 
GRANIT Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
5%
GRANIT
Pick-up hooks 320 mm, Ø 25 mm, 70 x 59 mm Case IH, New Holland
Width x height (mm): 70 x 59 | Length (mm): 320 | Hole Ø (mm): 25
€209,45 €173,10 €198,95 €164,42
 
DANA Spicer Synchro unit, complete High/Low range shift 16 x 16 and 17 x 16
5%
DANA Spicer
Synchro unit, complete High/Low range shift 16 x 16 and 17 x 16
€826,10 €682,73 €784,75 €648,55
 
Oil sump gasket Case IH, New Holland, Steyr
5%
Oil sump gasket Case IH, New Holland, Steyr
€118,37 €97,83 €112,45 €92,93
 
HELLA Alternator 14 V, 120 A, pulley Ø 61 mm, 8 grooves
20%
HELLA
Alternator 14 V, 120 A, pulley Ø 61 mm, 8 grooves
Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): 120...
€510,66 €422,03 €410,55 €339,30
 
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
5%
PTO shaft end piece 182,5 mm, 1 3/8 inch 6 grooves, 540 rpm.
Version: Length 182.5 mm, 1 3/8", 6 grooves, 540 rpm.
€340,02 €281,01 €323,00 €266,94
 
BOSCH Seal injection nozzle Ø 7 x 15 x 1,5 mm
BOSCH
Seal injection nozzle Ø 7 x 15 x 1,5 mm
€2,48 €2,05
 
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
5%
Thermostat Ø 60,5 mm, 81 °C Case IH, Steyr, New Holland
Ø: 60,5 mm. Temperature: 81 °C.
€45,96 €37,98 €43,65 €36,07
 
Optibelt Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
5%
Optibelt
Powerband multi-rib belt 8 ribs Case IH, Steyr, New Holland
€72,71 €60,09 €69,00 €57,02
 
GRANIT Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
GRANIT
Connecting rod bolt M10 x 1,25 x 52 mm Case IH, New Holland
Dimensions: M10 x 1.25 x 52.
€7,70 €6,36
 
GRANIT Air hose intercooler inner-Ø 57 mm, length 90 mm
5%
GRANIT
Air hose intercooler inner-Ø 57 mm, length 90 mm
Inner Ø: 57 mm. Length: 90 mm.
€41,78 €34,53 €39,65 €32,77
 
GRANIT Copper double ring inner-Ø 6 mm, outer-Ø 10 mm, height 7,3 mm
GRANIT
Copper double ring inner-Ø 6 mm, outer-Ø 10 mm, height 7,3 mm
Dimensions: Inner Ø: 6, Outer Ø: 10, Thickness: 1 mm. Thickness: 1 mm. Outer Ø: ...
€5,25 €4,34
 
GRANIT Plug 30 mm for for- and rear window lock
GRANIT
Plug 30 mm for for- and rear window lock
€6,50 €5,37
 
GRANIT Lift arm shaft 605 mm, Ø 30 mm Case IH, Fiat
5%
GRANIT
Lift arm shaft 605 mm, Ø 30 mm Case IH, Fiat
Dimensions: Length = 605, Ø = 30 mm.
€155,32 €128,36 €147,55 €121,94
 
Sealing ring lift arm shaft 28 x 43 x 14 mm Ford, Case IH, Fiat, New Holland
Sealing ring lift arm shaft 28 x 43 x 14 mm Ford, Case IH, Fiat, New Holland
Dimensions: 28 x 43 x 14 mm.
€23,60 €19,50
 
Spacer washer 29 x 42 x 13 mm Fiat, Case IH
Spacer washer 29 x 42 x 13 mm Fiat, Case IH
Dimensions: 29 x 42 x 13 mm.
€11,50 €9,50
 
GRANIT Windshield frame shock absorber 250 N, 490 mm Case IH, Steyr, New Holland
5%
GRANIT
Windshield frame shock absorber 250 N, 490 mm Case IH, Steyr, New Holland
Newtons: 250. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: windscreen. Form...
€50,43 €41,68 €47,90 €39,59
 
GRANIT Rocker switch four-wheel drive dashboard Maxxum, MXU, Puma
10%
GRANIT
Rocker switch four-wheel drive dashboard Maxxum, MXU, Puma
Version: Mounting: dashboard.
€139,94 €115,65 €126,60 €104,63
 
HELLA Plug 2-pin, 18 A, 6 - 24 V, insulated aardaansluiting
HELLA
Plug 2-pin, 18 A, 6 - 24 V, insulated aardaansluiting
Number of pins: 2. Power rating max. 24 V: 18. Current: 18 A. Nominal voltage: 6...
€14,40 €11,90
 
Showing 241 - 264 of 265

Case IH MXU 115 parts

If the driveline of your MXU 115 rattles at idle or clunks as the clutch takes up, the torsion damper between engine and transmission deserves a look first. It is one of more than 250 new replacement parts for this Case IH on this page, from GRANIT, Scharmüller, ROCKINGER, GRAMMER, PROBOSS and others.

Torsion damper and linkage seals

Replacing the torsion damper means splitting the tractor. While it is apart, inspect the splines on the shaft the damper slides onto. Worn splines will wear out a new damper early.

For the rear linkage there are lift arm shaft seals and complete seal kits. If oil is weeping from the lift arm shaft, clean the shaft and feel for a groove where the old seal ran. A new seal on a grooved shaft soon leaks again. Always fit the lip facing the oil. Separate sealing rings and ball joints for the front axle complete this area. Play in a ball joint shows up quickest when someone rocks the steering wheel while you watch the front wheel.

A leaking linkage seal kit often shows itself before oil appears on the floor, as an implement slowly sinks while the tractor is parked. Replace the full kit in one go, otherwise the neighbouring ring will start leaking a few months later. Deburr sharp edges on grooves and bores before fitting, and cycle the lift fully a few times afterwards before checking the oil level.

Hitching up

For the back end there are ROCKINGER automatic hitches, drawbar retrofit kits, height adjustable adapter plates and the Scharmüller Piton Fix system, so the hitch can be set up for the job in hand.

Seat and cab

Long days call for a decent seat. There are GRAMMER tractor seats from the Maximo line and air suspended PROBOSS seats, some with a seat heater. Mirrors, gas struts, rocker switches and sensors for the electronics complete the cab side.

Matching parts to your MXU

The type plate tells you which model you have. Look for a reference number on the old part and compare it with the number shown with the product. Before ordering a hitch or adapter plate, measure the rail width on the drawbar frame.

Running another MXU alongside the 115? Each of these models has a page of its own:

All other tractors of the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart