Menu
EUR

Case IH MXU 115 tractor parts & technical data

Engine components, electrics and trailer couplings for the Case IH MXU 115 are lined up here. The page holds more than 250 parts for this MXU series model.

265 parts found for Case IH MXU 115
Show:
Replacement key lock number 1012
Locking number: 1012. More
Locking number: 1012.
€37,10 €30,66
GRANIT Sealing ring piston 98 x 3,6 mm Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Dimensions: 98 x 3.6 mm. More
Dimensions: 98 x 3.6 mm.
€2,86 €2,36
Gas strut rear window 200 N, 490 mm, ball socket 10 mm
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 200. A: 490 mm. B: 245 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€49,72 €41,09 €44,95 €37,15
You save 10%
Mirror Case IH Farmall 85C, Puma 230 CVX, New Holland T4.85-T4.95
€72,68 €60,07 €65,75 €54,34
You save 10%
Sensor wheel speed Hall Matteffekt, connection cable with plug
Version: For speed, clutch block transmission (Hall effect), Connection cable with plug. More
Version: For speed, clutch block transmission (Hall effect), Connectio...
€112,05 €92,60 €106,40 €87,93
You save 5%
Push button switch PTO shaft, connection cable with plug
Version: PTO (PTO shaft switch), With mechanical control units, Connection cable with plug. More
Version: PTO (PTO shaft switch), With mechanical control units, Connec...
€132,85 €109,79 €120,15 €99,30
You save 10%
Number plate light 12V5WGLLS / W5W, 12 V
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb. More
Bulb: 12V5WGLLS / W5W. Nominal voltage: 12 V. Type: Bulb.
€39,20 €32,40
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€840,95 €695,00 €798,90 €660,25
You save 5%
Stabilizer three-point Case IH, Steyr, 690 g
€229,67 €189,81 €218,15 €180,29
You save 5%
Scharmüller Automatic hitch 120 kN, rail 330 mm, locking pin Ø 25 mm
Scharmüller
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | Detent pin Ø (mm): 25 | Colour: Black | Load capacity (kg): 2000 | Plate height (... More
Guide width (mm): 32 | Rail width (mm): 330 | D-value (kN): 120,0 | De...
€1.052,10 €869,50
Wabco Connector head M22 x 1,5 black aluminum with valve, 8 bar
Wabco
Operating pressure max. (bar): 8 | Version: Black, aluminium, with valve, for vehicles | Vehicle/application: For single-line brake, towing vehicle | ... More
Operating pressure max. (bar): 8 | Version: Black, aluminium, with val...
€92,46 €76,41 €87,80 €72,56
You save 5%
DANA Spicer Synchro unit, complete 16 x 16 / 16 x 17 and 24 x 24, Ø 90 mm
€863,02 €713,24 €780,80 €645,29
You save 10%
DANA Spicer Synchroniser unit, complete reverse gear Ø 114 mm
€831,71 €687,36 €790,10 €652,98
You save 5%
AKS-Dasis Pressure switch airco 0,5 bar Case IH, New Holland
AKS-Dasis
Opening pressure (bar): 0,5 More
Opening pressure (bar): 0,5
€121,30 €100,25 €115,20 €95,21
You save 5%
Filter dryer Ø 63,5 mm, 152 mm, connection thread M/F
Weight (g): 666 | Dimensions (mm): - | Outer Ø (mm): 63,5 | Material: Steel | Thread: #6 3/8 O-ring | Length (mm): 152 | Connection thread: M/F 20/20 More
Weight (g): 666 | Dimensions (mm): - | Outer Ø (mm): 63,5 | Material:...
€49,10 €40,58 €46,60 €38,51
You save 5%
Holset Reman turbocharger engine 667TA Case IH, New Holland
€1.183,48 €978,08 €1.124,30 €929,17
You save 5%
HELLA Alternator 14 V, 120 A, pulley Ø 67 mm, 8 grooves
HELLA
Charging current (A): 120 | Nominal voltage (V): 14 | Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 67 | Nominal values (V / A):... More
Charging current (A): 120 | Nominal voltage (V): 14 | Additional infor...
€484,53 €400,44 €389,56 €321,95
You save 20%
FEBI Cab filter 380 x 130 x 48 mm
€30,96 €25,59 €16,64 €13,75
You save 46%
GRANIT Tensioning pulley Ø 57 mm Case IH, New Holland
€45,07 €37,25 €42,80 €35,37
You save 5%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€179,61 €148,44 €170,60 €140,99
You save 5%
Ball joint 80 mm, M27 x 1,5, 1 1/4" x 12, taper 31 - 35 mm
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Taper: 31 - 35 mm. More
A: 80 mm. C: M27 x 1,5 mm. D: 1 1/4" x 12 mm. E: 31 mm. F: 35 mm. Tape...
€72,90 €60,25 €69,25 €57,23
You save 5%
LUK Torsion damper 16 teeth, 31X35 Case IH, Steyr, New Holland
LUK
Number of teeth: 16. Tooth profile: 31x35. More
Number of teeth: 16. Tooth profile: 31x35.
€350,83 €289,94 €333,25 €275,41
You save 5%
GRANIT Master brake cylinder mineral oil Ø 31,4 mm Case IH, New Holland, Steyr
€265,58 €219,49 €252,30 €208,51
You save 5%
GRANIT Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
GRANIT
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€272,49 €225,20 €258,85 €213,93
You save 5%
Showing 97 - 120 of 265

Case IH MXU 115 parts

If the driveline of your MXU 115 rattles at idle or clunks as the clutch takes up, the torsion damper between engine and transmission deserves a look first. It is one of more than 250 new replacement parts for this Case IH on this page, from GRANIT, Scharmüller, ROCKINGER, GRAMMER, PROBOSS and others.

Torsion damper and linkage seals

Replacing the torsion damper means splitting the tractor. While it is apart, inspect the splines on the shaft the damper slides onto. Worn splines will wear out a new damper early.

For the rear linkage there are lift arm shaft seals and complete seal kits. If oil is weeping from the lift arm shaft, clean the shaft and feel for a groove where the old seal ran. A new seal on a grooved shaft soon leaks again. Always fit the lip facing the oil. Separate sealing rings and ball joints for the front axle complete this area. Play in a ball joint shows up quickest when someone rocks the steering wheel while you watch the front wheel.

A leaking linkage seal kit often shows itself before oil appears on the floor, as an implement slowly sinks while the tractor is parked. Replace the full kit in one go, otherwise the neighbouring ring will start leaking a few months later. Deburr sharp edges on grooves and bores before fitting, and cycle the lift fully a few times afterwards before checking the oil level.

Hitching up

For the back end there are ROCKINGER automatic hitches, drawbar retrofit kits, height adjustable adapter plates and the Scharmüller Piton Fix system, so the hitch can be set up for the job in hand.

Seat and cab

Long days call for a decent seat. There are GRAMMER tractor seats from the Maximo line and air suspended PROBOSS seats, some with a seat heater. Mirrors, gas struts, rocker switches and sensors for the electronics complete the cab side.

Matching parts to your MXU

The type plate tells you which model you have. Look for a reference number on the old part and compare it with the number shown with the product. Before ordering a hitch or adapter plate, measure the rail width on the drawbar frame.

Running another MXU alongside the 115? Each of these models has a page of its own:

All other tractors of the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart