Menu
EUR

Case IH MXU 115 tractor parts & technical data

Engine components, electrics and trailer couplings for the Case IH MXU 115 are lined up here. The page holds more than 250 parts for this MXU series model.

265 parts found for Case IH MXU 115
Show:
Scharmüller Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
Scharmüller
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 200 kg. D-value: 17 kN. Overhang: 127 mm. Plate height: 133 mm. Hole: M16... More
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€813,42 €672,25 €719,35 €594,50
You save 12%
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€18,75 €15,50
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
GRAMMER
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Se... More
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholst...
€6.800,20 €5.620,00 €6.460,15 €5.338,97
You save 5%
Mirror 263 x 160 mm, unheated, manual, rod-Ø 10 - 24 mm
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. A... More
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left...
€34,50 €28,51 €32,75 €27,07
You save 5%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
ROCKINGER Drawbar KS80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Description: Ball hitch with com... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.498,36 €1.238,31 €1.147,30 €948,18
You save 23%
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.379,23 €1.139,86 €1.219,75 €1.008,06
You save 12%
Potentiometer transmission for electronic control unit with connector
Version: For electronic control unit, Connection cable with plug. More
Version: For electronic control unit, Connection cable with plug.
€145,39 €120,16 €138,10 €114,13
You save 5%
HELLA Multifunction relay N/O-contact 12 V, 40 A, 4-pin, 6,3 mm
HELLA
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 4-pin, blade terminal 6.3 mm.
€18,15 €15,00
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Scharmüller Drawbar frame 16 kN, rail 200 mm, guide 25 mm, pin Ø 16 mm
Scharmüller
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey | Version: Prepared for drawbar | Detent pin Ø (mm): 16 | Category: Bearing supp... More
Guide width (mm): 25 | Load capacity (kg): 500 | Colour: Kubota grey |...
€769,00 €635,54
Eaton Planetary gear transmission, 994 g
Eaton
Reference no.: 5145497 More
Reference no.: 5145497
€82,40 €68,10 €78,25 €64,67
You save 5%
CARLISLE Internal plate PTO clutch 1,8 mm, 91 - 140 mm, 32 teeth
CARLISLE
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth More
Version: Thickness: 1.8 mm Inner: 91 mm Outer: 140 mm 32 teeth
€25,24 €20,86 €23,95 €19,79
You save 5%
GRANIT External plate 4 WD 1,5 mm, inner 100 mm, outer 152 mm, 6 teeth
GRANIT
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth More
Version: Thickness: 1.5 mm Inner: 100 mm Outer: 152 mm 6 teeth
€8,58 €7,09 €8,15 €6,74
You save 5%
GRANIT Alternator 14 V, 120 A, flange 83 mm, Case IH, New Holland, Steyr
GRANIT
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): 83,0 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm): M8 / 86,0 | Addi... More
Pulley Ø (mm): 61.0 | Direction of rotation: ↻ | Flange size (mm): ...
€241,75 €199,79 €229,65 €189,79
You save 5%
PROBOSS Seat AS3520 air suspended 520 mm, 12 V IHC, Steyr, New Holland
PROBOSS
- Air suspension with 12V compressor - Fore/aft isolator - Continuous height adjustment - Longitudinal adjustment - Backrest tilt adjustment - Mechani... More
- Air suspension with 12V compressor - Fore/aft isolator - Continuous ...
€1.742,40 €1.440,00
FEBI Multi-rib belt 8 ribs Case IH, Steyr, New Holland
FEBI
To fit as: Case IH More
To fit as: Case IH
€47,53 €39,28 €17,58 €14,53
You save 63%
Steering cylinder right and left ball eye-Ø 20 mm Case IH, New Holland
Technical data: Ball eye Ø: 20 mm. More
Technical data: Ball eye Ø: 20 mm.
€425,33 €351,51 €404,00 €333,88
You save 5%
GRANIT Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€60,42 €49,93 €57,35 €47,40
You save 5%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.306,80 €1.080,00 €1.050,65 €868,31
You save 20%
Vibration damper Case IH Farmall 85C-115C, Steyr Profi 6125, 6140
€104,75 €86,57 €99,50 €82,23
You save 5%
GRANIT Belt kit 1550 mm, 8 ribs, belt tensioner
GRANIT
Version: For main belt drive. Contents: Belt, belt tensioner. Belt length: 1550 mm. Ribs: 8 n. More
Version: For main belt drive. Contents: Belt, belt tensioner. Belt len...
€45,56 €37,65 €43,25 €35,74
You save 5%
Showing 73 - 96 of 265

Case IH MXU 115 parts

If the driveline of your MXU 115 rattles at idle or clunks as the clutch takes up, the torsion damper between engine and transmission deserves a look first. It is one of more than 250 new replacement parts for this Case IH on this page, from GRANIT, Scharmüller, ROCKINGER, GRAMMER, PROBOSS and others.

Torsion damper and linkage seals

Replacing the torsion damper means splitting the tractor. While it is apart, inspect the splines on the shaft the damper slides onto. Worn splines will wear out a new damper early.

For the rear linkage there are lift arm shaft seals and complete seal kits. If oil is weeping from the lift arm shaft, clean the shaft and feel for a groove where the old seal ran. A new seal on a grooved shaft soon leaks again. Always fit the lip facing the oil. Separate sealing rings and ball joints for the front axle complete this area. Play in a ball joint shows up quickest when someone rocks the steering wheel while you watch the front wheel.

A leaking linkage seal kit often shows itself before oil appears on the floor, as an implement slowly sinks while the tractor is parked. Replace the full kit in one go, otherwise the neighbouring ring will start leaking a few months later. Deburr sharp edges on grooves and bores before fitting, and cycle the lift fully a few times afterwards before checking the oil level.

Hitching up

For the back end there are ROCKINGER automatic hitches, drawbar retrofit kits, height adjustable adapter plates and the Scharmüller Piton Fix system, so the hitch can be set up for the job in hand.

Seat and cab

Long days call for a decent seat. There are GRAMMER tractor seats from the Maximo line and air suspended PROBOSS seats, some with a seat heater. Mirrors, gas struts, rocker switches and sensors for the electronics complete the cab side.

Matching parts to your MXU

The type plate tells you which model you have. Look for a reference number on the old part and compare it with the number shown with the product. Before ordering a hitch or adapter plate, measure the rail width on the drawbar frame.

Running another MXU alongside the 115? Each of these models has a page of its own:

All other tractors of the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart