Menu
EUR

Case IH MXU 125 tractor parts & technical data

Choose from more than 250 parts for the Case IH MXU 125. Trailer couplings, electrics and engine components sit together on this page, which saves you time.

264 parts found for Case IH MXU 125
Show:
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
GRAMMER Tractor seat Maximo Evolution Dynamic air suspended, 550 mm
GRAMMER
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | Suspension: Air suspension | Side horizontal suspension: Yes | Track gauge (mm):... More
Restraint system: Yes | On-board voltage (V): 12 | Seat heater: Yes | ...
€6.763,90 €5.590,00 €6.425,70 €5.310,50
You save 5%
GRAMMER Seat Maximo Professional MSG95AL/731, 530 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€2.456,00 €2.029,75
GRAMMER Tractor seat Maximo Professional Case IH, Steyr, New Holland
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.503,30 €2.068,84
GRAMMER Tractor seat Maximo Comfort Plus MSG95A/731
GRAMMER
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 530 ... More
To fit: Case, New Holland, Steyr. Suspension: Air suspension. Upholste...
€2.191,00 €1.810,74
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€55,61 €45,96 €52,80 €43,64
You save 5%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.108,13 €915,81 €933,36 €771,37
You save 16%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€704,78 €582,46 €623,25 €515,08
You save 12%
Mirror holder left Case IH, Steyr, New Holland
€132,74 €109,70 €126,10 €104,21
You save 5%
GRANIT Solenoid switch valve 132 mm, PWM-valve
GRANIT
Version: 132 mm, PWM valve. More
Version: 132 mm, PWM valve.
€210,15 €173,68
Oil pressure switch oil filter hydraulics with seal ring, 12 / 24 volt
Version: With sealing ring, operating voltage 12/24 V. More
Version: With sealing ring, operating voltage 12/24 V.
€279,51 €231,00 €252,85 €208,97
You save 10%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
You save 5%
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colour: Kubota grey | Version: Standard | Width (mm): 50 | Length (mm): 24... More
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): ...
€259,15 €214,17
Scharmüller Drawbar pin-Ø 31,5 mm, 387 mm, category 2, black
Scharmüller
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 387 | Trailer load (kg): 2500 | Colour: Black | Pin Ø (mm): 31,5 | Load capacity ... More
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 38...
€324,75 €268,39
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€74,90 €61,90 €71,15 €58,80
You save 5%
FEBI Secondary air filter CF1140/2
€45,56 €37,65 €17,32 €14,31
You save 62%
Ball joint 125 mm, taper 24 - 27 mm, 3/4" x 16 / 1 1/8" x 16
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Taper: 24 - 27 mm. More
A: 125 mm. C: 3/4" x 16 mm. D: 1 1/8" x 16 mm. E: 24 mm. F: 27 mm. Tap...
€62,19 €51,40 €59,00 €48,76
You save 5%
Ball joint 500 mm, 3/4" x 16, 34,8 mm
A: 500 mm. C: 3/4" x 16 mm. D: 34,8 mm. E: 23,9 mm. F: 27,4 mm. Taper: 23,9 - 27,4 mm. More
A: 500 mm. C: 3/4" x 16 mm. D: 34,8 mm. E: 23,9 mm. F: 27,4 mm. Taper:...
€118,41 €97,86 €112,45 €92,93
You save 5%
GRANIT PTO shaft end piece 182,6 mm, 1 3/8 inch 21 splines, 1000 rpm.
GRANIT
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125042. More
Version: Length 182.6 mm, 1 3/8", 21 grooves, 1000 rpm. Menke no.: 125...
€329,35 €272,19 €312,85 €258,55
You save 5%
GRAMMER Seat Maximo Dynamic DDS MSG95AL/741, 550 mm
GRAMMER
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: ... More
To fit: Case CVX, Steyr, New Holland. Suspension: Air suspension. Upho...
€3.081,10 €2.546,36
Scharmüller Drawbar ball 50, rail 295 mm, pin Ø 25 mm, 200 kg, black
Scharmüller
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load capacity: 200 kg. D-value: 17 kN. Overhang: 127 mm. Plate height: 133 mm. Hole: M16... More
Rail width: 295 mm. Guide width: 26 mm. Detent pin Ø: 25 mm. Load cap...
€813,42 €672,25 €719,35 €594,50
You save 12%
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
Tank cap grommet-Ø 55 mm
Neck Ø: 55 mm. More
Neck Ø: 55 mm.
€18,75 €15,50
GRAMMER Tractor seat Maximo Evolution Dynamic Case CVX, Steyr, New Holland
GRAMMER
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholstery type: Fabric / new design. Seat contact switch: Yes. Track gauge: 260 mm. Se... More
To fit: Case IH, New Holland, CVX. Suspension: Air suspension. Upholst...
€6.800,20 €5.620,00 €6.460,15 €5.338,97
You save 5%
Showing 49 - 72 of 264

Case IH MXU 125 parts for hitching, seating and steering

On an MXU 125 the wear shows up first where the tractor works hardest every day: the hitch at the back, the seat under the driver and the joints in the steering. This page brings together more than 250 replacement parts that fit this Case IH tractor, from makers such as GRANIT, Scharmüller, ROCKINGER, GRAMMER and PROBOSS.

Hitches, drawbars and Piton Fix

For coupling up there are automatic hitches from ROCKINGER, drawbars and conversion kits, height adjustable adapter plates and the Piton Fix system from Scharmüller. The hitch slides into the rail on the frame and is held by a locking pin. Before ordering, measure the rail width and the pin diameter on your own tractor. If the guides in the rail are worn or burred, deal with that first, because a new hitch in a tired rail soon starts to rattle again.

Seat, cab and switches

For the driver there are Maximo tractor seats from GRAMMER and air suspended seats from PROBOSS, some of them heated. When swapping a seat, compare the bolt pattern of the base and the power lead for the seat compressor, so the new seat goes onto the existing console without drilling. The cab side also covers rocker switches, including the raise and lower switch for the rear linkage, mirrors, gas struts and fuel tank caps. One thing worth knowing about the cap: if its breather is blocked, the tank pulls a vacuum and the engine dies after a while as if the fuel filter were clogged. Crack the cap open and listen for air rushing in before you start changing filters.

Steering, driveline and choosing the right part

Underneath, the list runs to ball joints, sealing rings, O-rings, the torsion damper and the PTO speed sensor with its cable and plug. Checking a ball joint is a two person job: one rocks the steering wheel gently from side to side while the other holds the joint and feels for play. To pick the right version, start from the rating plate and serial number of the tractor. If the old part still carries a reference number, check it against the details given with the product on this page.

If you run more than one tractor from the MXU line, each model has its own page: MXU 100, MXU 110, MXU 115 and MXU 135. That way you order for each machine exactly what belongs on it. Other models from the brand are listed under Case IH parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart